On Thu, 29 Jan 2009, Geoff Levand wrote:
> >
> > //*************************************************************************************************************************************
> > ip:d000000000045aec jumps to d000000000046340 r2: d000000000050c00
> > 3d82ffff 398c5740 ffff5740 toc: d000000000046360 c0000000 00007cac
> > ip:d0000000000458d0 jumps to d000000000046340 r2: d000000000050c00
> > 3d82ffff 398c5740 ffff5740 toc: d000000000046360 c0000000 00007cac
> > ip:d000000000045838 jumps to d000000000046340 r2: d000000000050c00
> > 3d82ffff 398c5740 ffff5740 toc: d000000000046360 c0000000 00007cac
> > ip:d0000000000456dc jumps to d000000000046340 r2: d000000000050c00
> > 3d82ffff 398c5740 ffff5740 toc: d000000000046360 c0000000 00007cac
> ...
So I take it that the above showed that the code worked for some?
> > ps3_system_bus_match:362: dev=11.0(lpm_01), drv=11.0(ps3-lpm): match
> > ps3_system_bus_match:362: dev=11.0(lpm_01), drv=11.0(ps3-lpm): match
> > ps3-lpm lpm_01: <- ps3_lpm_probe:1245:
> > ip:d0000000003fe280 jumps to d0000000003ffad8 r2: d000000000422c70
Could you find out what that function is? Perhaps do a:
printk("ip:%pF\n", ip);
As long as you have kallsyms on, that should point to the function that's
the problem.
> > 3d82fffe 398cce68 fffece68 toc: d00000000040faf8 6c656400 5f5f6b73
> > addr does not match
> > ptr: 6c6564005f5f6b73
ptr is the same info as the last line above.
> > addr: c0000000004ff128
> > GET_ADDR(addr): c000000000007cac
>
> I don't know so much about ftrace, but to get a better idea of the
> problem, could you try with the patch below?
>
> Is ps3-lpm built as a loadable module, and if so, is it the first one
> that got loaded?
>
> Also, try to either build with CONFIG_PS3_LPM=n, or delete ps3-lpm.ko
> so it does not get loaded to see what happens.
>
> -Geoff
>
> --- a/arch/powerpc/kernel/ftrace.c
> +++ b/arch/powerpc/kernel/ftrace.c
> @@ -23,7 +23,7 @@
> #if 0
Heh, I would have just done:
- #if 0
+ #if 1
;-)
-- Steve
> #define DEBUGP printk
> #else
> -#define DEBUGP(fmt , ...) do { } while (0)
> +#define DEBUGP printk
> #endif
>
> static unsigned int ftrace_nop = PPC_NOP_INSTR;
> @@ -213,6 +213,8 @@ __ftrace_make_nop(struct module *mod,
>
> ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
>
> + printk("ptr %lx, addr %lx, GET_ADDR %lx\n", ptr, addr, GET_ADDR(addr));
> +
> /* This should match what was called */
> if (ptr != GET_ADDR(addr)) {
> printk(KERN_ERR "addr does not match %lx\n", ptr);
>
>
>
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
