Benjamin Herrenschmidt wrote:
On Sun, 2008-12-21 at 16:11 -0800, Kevin Diggs wrote:
Hi,
I have a water cooled dual 2.5 GHz G5 (Powermac7,3). It has YDL 6.0 on
it. Using the stock YDL 2.6.23 kernel this machine "appears" to work fine.
After finally getting it to boot under 2.6.27, it will shut itself off
if put under any significant load. And it is doing it very quickly. Like
within a few seconds of becoming busy. I just discovered it is spitting
out messages about "temperature way above maximum" (from therm_pm72.c).
This one has the Panasonic cooling system. I have checked behind the
cover and see no evidence of leaks.
When put under load under the stock YDL kernel, the cpu fans will speed
up for about 2 minutes. Then over the next minute or so they will slow
down almost to idle. Thereafter a whirring sound can be heard every 15
to 30 seconds lasting about 5 seconds. Which I am guessing is the pump?
The exhaust air barely gets warm?
Anyone have any ideas? Could the cooling system NOT be correctly
thermally connected to the cpus?
I would appreciate it if one of the many people on this list that are
way more smarterer than me could tell me something like, "If this were
true you would have toasted the cpus already!"
I have approx. the same here taking dust under the desk, I'll give it a
spin but i might have to wait a couple of days...
If mine works, then we'll have to run some more intensive debugging to
see what's going on.
Cheers,
Ben.
Ben,
I would appreciate it. I am now kinda afraid to turn the thing on.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
