On Wed, Nov 18, 2026 at 11:40:00AM +0100, Lukas Wunner wrote:
> Bjorn suggests "the PCI core should do pci_enable_pcie_error_reporting()
> independent of whether the device has an AER Capability":
> 
> https://lore.kernel.org/r/20260826212619.GA1566339@bhelgaas/
> 
> This is done in patch [7/7].  The preceding patches contain prep work.
> 
> For context, PCIe r7.1 sec 6.2.1 defines two error reporting paradigms:
> AER and baseline capability.  The latter relies (solely) on the error
> enable/status bits in the Device Control and Device Status registers,
> which exist on every PCIe device.  The kernel has supported the AER
> paradigm for 20 years.  With the present series, it gains support for
> the baseline capability paradigm.
> 
> Patches [1/7] and [2/7] reinstate DPC on AER-incapable Downstream Ports.
> The kernel used to support this until 2018.  It is hereby fixed because
> it eases introduction of baseline capability error reporting in the
> subsequent patches.
> 
> 
> Changes v1 -> v2:
> 
> * Patch [1/7]:
>   * On AER-capable devices, infer severity from AER Extended Capability
>     instead of Device Status register because the latter also logs masked
>     errors (Sathya).
>   * Fix storytelling in commit message because 4e5fad429bd1 changed
>     behavior, not 708b20003624 (Sathya).
> 
> * Patch [3/7]:
>   * New patch to clear error status bits more selectively (sashiko).
> 
> * Patch [4/7]:
>   * Clear Fatal Errors as well on recovery failure (Sathya, sashiko).
> 
> * Patch [6/7]:
>   * Amend kernel-doc of pci_aer_unmask_internal_errors() (Sathya).
> 
> * Patch [7/7]:
>   * Convert AER severity to Device Status bit with new severity2devsta[]
>     array, instead of renumbering AER severity (sashiko).
>   * On entry of aer_get_device_error_info(), clear info->mask and
>     info->first_error (Sathya, sashiko).
>   * Emit "(no details available)" message for AER-incapable devices
>     as well as for devices whose AER registers are deliberately not
>     read on Fatal Errors (Sathya).
>   * Amend commit message to inform that System Errors may be raised
>     by AER-incapable devices if they have no AER- or DPC-capable
>     port in their ancestry (Sathya).
> 
> Link to v1:
> 
> https://lore.kernel.org/r/[email protected]/
> 
> 
> Lukas Wunner (6):
>   PCI/DPC: Avoid access to non-existent AER capability
>   PCI/DPC: Reinstate support for AER-incapable ports
>   PCI/ERR: Clear error status bits more selectively
>   PCI/AER: Drop AER native check from handles_cxl_errors()
>   PCI/AER: Move AER capability check out of pcie_aer_is_native()
>   PCI/AER: Enable baseline capability error reporting
> 
> Yury Murashka (1):
>   PCI/ERR: Avoid stale error status bits on recovery failure
> 
>  .../ABI/testing/sysfs-bus-pci-devices-aer     | 26 +++++--
>  Documentation/PCI/pcieaer-howto.rst           |  9 +--
>  drivers/pci/pcie/aer.c                        | 76 +++++++++++++------
>  drivers/pci/pcie/aer_cxl_rch.c                |  3 +-
>  drivers/pci/pcie/dpc.c                        | 46 +++++++----
>  drivers/pci/pcie/err.c                        | 14 +++-
>  6 files changed, 120 insertions(+), 54 deletions(-)

Applied to pci/aer for v7.5, thanks!

Reply via email to