> This patch set adds PTP timestamping support to the NETC switch, so that > the switch ports can be used for IEEE 1588 PTP synchronization. > > The NETC switch has no time registers of its own and instead shares the > PTP time of the NETC Timer, which is a separate PCIe function driven by > its own driver. The first 3 patches prepare the Timer driver for this > role: tidy up its 64-bit register access, drop an ineffective reset, and > export netc_timer_get_current_time() so the switch driver can read the > current PTP time across the driver boundary in a race-free way. > > The switch redirects PTP frames to the CPU through the ingress port > filter table (IPFT). A few patches harden and simplify the existing IPFT > and host flood handling first, then enable the ingress port filtering > lookup by default so PTP filter rules take effect without extra software > tracking. > > On top of that groundwork, the switch driver gains RX timestamping and > both flavours of TX timestamping. Timestamps are carried between the > hardware and the driver through dedicated switch tags: the ingress and > transmit timestamps ride in To_Host tags, and per-frame requests ride in > To_Port tags. Two-step TX matches a queued skb clone against the > timestamp response echoed back by the hardware. One-step TX defers the > Sync frame to a per-port work, where the driver reads a fresh PTP time > and writes it into the Sync frame's timestamp field, then programs the > single-step register and transmits the frame so the hardware can add the > residence time to the correction field on the wire. > > Together these changes let standard user-space PTP stacks drive hardware > timestamping on the NETC switch ports. > > --- > v7 changes: > 1. Rename in_probe to configured in struct netc_switch > 2. ptp_ipft_eid[] is initialized for every port, next to ipft_hf_eid > 3. Return -EOPNOTSUPP when netc_get_phc_index() is negative in > netc_port_hwtstamp_get() > 4. Initialize onestep_state to NETC_ONESTEP_PORT_INACTIVE in > netc_port_ptp_init() > 5. Drop the netc_port_enable_onestep() call from netc_port_enable() > 6. When the frame is not known to be a one-step Sync, set *twostep to > true instead of dropping it > v6 link: https://lore.kernel.org/imx/20261103021024.3121936-1- > [email protected]/ > v5 link: https://lore.kernel.org/imx/20261012095924.1129312-1- > [email protected]/ > v4 link: https://lore.kernel.org/imx/20260918072852.501420-1- > [email protected]/ > v3 link: https://lore.kernel.org/imx/20260831082335.1184605-1- > [email protected]/ > v2 link: https://lore.kernel.org/imx/20260808032146.2335723-1- > [email protected]/ > v1 link: https://lore.kernel.org/imx/20260728104548.3301214-1- > [email protected]/ > --- > > Wei Fang (9): > ptp: netc: use ioread64_lo_hi/iowrite64_lo_hi for 64-bit register > access > ptp: netc: remove unnecessary pcie_flr() call in probe > ptp: netc: export netc_timer_get_current_time() for cross-driver use > net: dsa: netc: tie setup resources and reset to DSA setup/teardown > net: dsa: netc: use entry ID instead of pointer to track host flood > rule > net: dsa: netc: check return value of ntmp_ipft_delete_entry() > net: dsa: netc: enable ingress port filtering lookup by default > net: dsa: netc: add PTP two-step timestamping support > net: dsa: netc: add PTP one-step timestamping support > > drivers/net/dsa/netc/Kconfig | 2 + > drivers/net/dsa/netc/Makefile | 3 +- > drivers/net/dsa/netc/netc_main.c | 404 +++++++++--- > drivers/net/dsa/netc/netc_platform.c | 1 + > drivers/net/dsa/netc/netc_ptp.c | 895 ++++++++++++++++++++++++++ > drivers/net/dsa/netc/netc_switch.h | 67 +- > drivers/net/dsa/netc/netc_switch_hw.h | 5 + > drivers/ptp/ptp_netc.c | 136 ++-- > include/linux/dsa/tag_netc.h | 38 ++ > include/linux/fsl/netc_global.h | 10 + > net/dsa/tag_netc.c | 228 ++++++- > 11 files changed, 1619 insertions(+), 170 deletions(-) > create mode 100644 drivers/net/dsa/netc/netc_ptp.c > > -- > 2.34.1
The code base of the switch driver has been updated, so this series needs to be rebased as well. -- pw-bot: cr
