The cm109 driver was written in 2007-2008 (modeled after yealink) for four mid-2000s USB VoIP/Skype handsets (Komunikate KIP1000, Genius G-talk, Allied-Telesis Corega USBPH01, and ATCom AU-100) built around the C-Media CM109 USB audio and HID controller (0x0d8c:0x000e). Audio was handled by snd-usb-audio, while cm109 polled a 4x4 phone keypad matrix and drove a buzzer wired to the chip's GPIO pins via vendor HID reports, relying on a module parameter (phone=...) to select the phone keymap.
The mid-2000s userspace VoIP/Skype bridge ecosystem for these handsets is long defunct, the driver has had no new hardware support since 2008 (and has had broken keycodesize = sizeof(unsigned char) for KEY_NUMERIC_* keycodes > 255), while its custom URB state machine continues to generate syzbot crashes. Furthermore, because 0x0d8c:0x000e is the generic C-Media CM109 VID:PID and was added to hid_ignore_list[] so cm109 could claim the USB interface, cm109 actively interferes with non-phone CM109 hardware still in use today. Amateur radio interfaces (Direwolf, AllStarLink, SVXLink, UniPager, Hamlib) must blacklist cm109 so usbhid can expose /dev/hidraw* and to prevent cm109 from pulsing the GPIO pins (which keys the radio transmitter's PTT line) when the input device is opened. Standard USB headsets with 0x0d8c:0x000e can use usbhid directly via the chip's standard HID Consumer Page volume and mute descriptors once the hid_ignore_list[] entry is removed. Remove the driver, its Kconfig and Makefile entries, and the HID ignore-list entry. Signed-off-by: Dmitry Torokhov <[email protected]> --- drivers/hid/hid-ids.h | 1 - drivers/hid/hid-quirks.c | 1 - drivers/input/misc/Kconfig | 12 - drivers/input/misc/Makefile | 1 - drivers/input/misc/cm109.c | 940 ------------------------------------ 5 files changed, 955 deletions(-) delete mode 100644 drivers/input/misc/cm109.c diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index acfd6fafed73..4f6fe0986b28 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -355,7 +355,6 @@ #define USB_DEVICE_ID_NITROKEY_U2F 0x4287 #define USB_VENDOR_ID_CMEDIA 0x0d8c -#define USB_DEVICE_ID_CM109 0x000e #define USB_DEVICE_ID_CMEDIA_HS100B 0x0014 #define USB_DEVICE_ID_CM6533 0x0022 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index f4735b0f01ec..d550dff92c66 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -846,7 +846,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI4713) }, - { HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM109) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_ULTRAMOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_DEALEXTREAME, USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701) }, diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 955cca77e9fe..b108776ae09e 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -469,18 +469,6 @@ config INPUT_POWERMATE To compile this driver as a module, choose M here: the module will be called powermate. -config INPUT_CM109 - tristate "C-Media CM109 USB I/O Controller" - depends on USB_ARCH_HAS_HCD - select USB - help - Say Y here if you want to enable keyboard and buzzer functions of the - C-Media CM109 usb phones. The audio part is enabled by the generic - usb sound driver, so you might want to enable that as well. - - To compile this driver as a module, choose M here: the module will be - called cm109. - config INPUT_REGULATOR_HAPTIC tristate "Regulator haptics support" depends on REGULATOR diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index d4576869aff9..46aadeaba67b 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o obj-$(CONFIG_INPUT_AW86927) += aw86927.o obj-$(CONFIG_INPUT_BBNSM_PWRKEY) += nxp-bbnsm-pwrkey.o obj-$(CONFIG_INPUT_BMA150) += bma150.o -obj-$(CONFIG_INPUT_CM109) += cm109.o obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c deleted file mode 100644 index 353d3c1d347d..000000000000 --- a/drivers/input/misc/cm109.c +++ /dev/null @@ -1,940 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Driver for the VoIP USB phones with CM109 chipsets. - * - * Copyright (C) 2007 - 2008 Alfred E. Heggestad <[email protected]> - */ - -/* - * Tested devices: - * - Komunikate KIP1000 - * - Genius G-talk - * - Allied-Telesis Corega USBPH01 - * - ... - * - * This driver is based on the yealink.c driver - * - * Thanks to: - * - Authors of yealink.c - * - Thomas Reitmayr - * - Oliver Neukum for good review comments and code - * - Shaun Jackman <[email protected]> for Genius G-talk keymap - * - Dmitry Torokhov for valuable input and review - * - * Todo: - * - Read/write EEPROM - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/rwsem.h> -#include <linux/usb/input.h> - -#define DRIVER_VERSION "20080805" -#define DRIVER_AUTHOR "Alfred E. Heggestad" -#define DRIVER_DESC "CM109 phone driver" - -static char *phone = "kip1000"; -module_param(phone, charp, S_IRUSR); -MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}"); - -enum { - /* HID Registers */ - HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */ - HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */ - HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */ - HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */ - HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */ - HID_OR1 = 0x01, /* GPO - General Purpose Output */ - HID_OR2 = 0x02, /* Set GPIO to input/output mode */ - HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */ - - /* HID_IR0 */ - RECORD_MUTE = 1 << 3, - PLAYBACK_MUTE = 1 << 2, - VOLUME_DOWN = 1 << 1, - VOLUME_UP = 1 << 0, - - /* HID_OR0 */ - /* bits 7-6 - 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer - and SPDIF - 1: HID_OR0-3 are used as generic HID registers - 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL, - EEPROM_DATA0-1, EEPROM_CTRL (see Note) - 3: Reserved - */ - HID_OR_GPO_BUZ_SPDIF = 0 << 6, - HID_OR_GENERIC_HID_REG = 1 << 6, - HID_OR_MAP_MCU_EEPROM = 2 << 6, - - BUZZER_ON = 1 << 5, - - /* up to 256 normal keys, up to 15 special key combinations */ - KEYMAP_SIZE = 256 + 15, -}; - -/* CM109 protocol packet */ -struct cm109_ctl_packet { - u8 byte[4]; -} __attribute__ ((packed)); - -enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) }; - -/* CM109 device structure */ -struct cm109_dev { - struct input_dev *idev; /* input device */ - struct usb_device *udev; /* usb device */ - struct usb_interface *intf; - - /* irq input channel */ - struct cm109_ctl_packet *irq_data; - dma_addr_t irq_dma; - struct urb *urb_irq; - - /* control output channel */ - struct cm109_ctl_packet *ctl_data; - dma_addr_t ctl_dma; - struct usb_ctrlrequest *ctl_req; - struct urb *urb_ctl; - /* - * The 3 bitfields below are protected by ctl_submit_lock. - * They have to be separate since they are accessed from IRQ - * context. - */ - unsigned irq_urb_pending:1; /* irq_urb is in flight */ - unsigned ctl_urb_pending:1; /* ctl_urb is in flight */ - unsigned buzzer_pending:1; /* need to issue buzz command */ - spinlock_t ctl_submit_lock; - - unsigned char buzzer_state; /* on/off */ - - /* flags */ - unsigned open:1; - unsigned resetting:1; - unsigned shutdown:1; - - /* This mutex protects writes to the above flags */ - struct mutex pm_mutex; - - unsigned short keymap[KEYMAP_SIZE]; - - char phys[64]; /* physical device path */ - int key_code; /* last reported key */ - int keybit; /* 0=new scan 1,2,4,8=scan columns */ - u8 gpi; /* Cached value of GPI (high nibble) */ -}; - -/****************************************************************************** - * CM109 key interface - *****************************************************************************/ - -static unsigned short special_keymap(int code) -{ - if (code > 0xff) { - switch (code - 0xff) { - case RECORD_MUTE: return KEY_MICMUTE; - case PLAYBACK_MUTE: return KEY_MUTE; - case VOLUME_DOWN: return KEY_VOLUMEDOWN; - case VOLUME_UP: return KEY_VOLUMEUP; - } - } - return KEY_RESERVED; -} - -/* Map device buttons to internal key events. - * - * The "up" and "down" keys, are symbolised by arrows on the button. - * The "pickup" and "hangup" keys are symbolised by a green and red phone - * on the button. - - Komunikate KIP1000 Keyboard Matrix - - -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10) - | | | | - <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20) - | | | | - END - 7 -- 8 -- 9 --> GPI pin 6 (0x40) - | | | | - OK -- * -- 0 -- # --> GPI pin 7 (0x80) - | | | | - - /|\ /|\ /|\ /|\ - | | | | -GPO -pin: 3 2 1 0 - 0x8 0x4 0x2 0x1 - - */ -static unsigned short keymap_kip1000(int scancode) -{ - switch (scancode) { /* phone key: */ - case 0x82: return KEY_NUMERIC_0; /* 0 */ - case 0x14: return KEY_NUMERIC_1; /* 1 */ - case 0x12: return KEY_NUMERIC_2; /* 2 */ - case 0x11: return KEY_NUMERIC_3; /* 3 */ - case 0x24: return KEY_NUMERIC_4; /* 4 */ - case 0x22: return KEY_NUMERIC_5; /* 5 */ - case 0x21: return KEY_NUMERIC_6; /* 6 */ - case 0x44: return KEY_NUMERIC_7; /* 7 */ - case 0x42: return KEY_NUMERIC_8; /* 8 */ - case 0x41: return KEY_NUMERIC_9; /* 9 */ - case 0x81: return KEY_NUMERIC_POUND; /* # */ - case 0x84: return KEY_NUMERIC_STAR; /* * */ - case 0x88: return KEY_ENTER; /* pickup */ - case 0x48: return KEY_ESC; /* hangup */ - case 0x28: return KEY_LEFT; /* IN */ - case 0x18: return KEY_RIGHT; /* OUT */ - default: return special_keymap(scancode); - } -} - -/* - Contributed by Shaun Jackman <[email protected]> - - Genius G-Talk keyboard matrix - 0 1 2 3 - 4: 0 4 8 Talk - 5: 1 5 9 End - 6: 2 6 # Up - 7: 3 7 * Down -*/ -static unsigned short keymap_gtalk(int scancode) -{ - switch (scancode) { - case 0x11: return KEY_NUMERIC_0; - case 0x21: return KEY_NUMERIC_1; - case 0x41: return KEY_NUMERIC_2; - case 0x81: return KEY_NUMERIC_3; - case 0x12: return KEY_NUMERIC_4; - case 0x22: return KEY_NUMERIC_5; - case 0x42: return KEY_NUMERIC_6; - case 0x82: return KEY_NUMERIC_7; - case 0x14: return KEY_NUMERIC_8; - case 0x24: return KEY_NUMERIC_9; - case 0x44: return KEY_NUMERIC_POUND; /* # */ - case 0x84: return KEY_NUMERIC_STAR; /* * */ - case 0x18: return KEY_ENTER; /* Talk (green handset) */ - case 0x28: return KEY_ESC; /* End (red handset) */ - case 0x48: return KEY_UP; /* Menu up (rocker switch) */ - case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */ - default: return special_keymap(scancode); - } -} - -/* - * Keymap for Allied-Telesis Corega USBPH01 - * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html - * - * Contributed by [email protected] - */ -static unsigned short keymap_usbph01(int scancode) -{ - switch (scancode) { - case 0x11: return KEY_NUMERIC_0; /* 0 */ - case 0x21: return KEY_NUMERIC_1; /* 1 */ - case 0x41: return KEY_NUMERIC_2; /* 2 */ - case 0x81: return KEY_NUMERIC_3; /* 3 */ - case 0x12: return KEY_NUMERIC_4; /* 4 */ - case 0x22: return KEY_NUMERIC_5; /* 5 */ - case 0x42: return KEY_NUMERIC_6; /* 6 */ - case 0x82: return KEY_NUMERIC_7; /* 7 */ - case 0x14: return KEY_NUMERIC_8; /* 8 */ - case 0x24: return KEY_NUMERIC_9; /* 9 */ - case 0x44: return KEY_NUMERIC_POUND; /* # */ - case 0x84: return KEY_NUMERIC_STAR; /* * */ - case 0x18: return KEY_ENTER; /* pickup */ - case 0x28: return KEY_ESC; /* hangup */ - case 0x48: return KEY_LEFT; /* IN */ - case 0x88: return KEY_RIGHT; /* OUT */ - default: return special_keymap(scancode); - } -} - -/* - * Keymap for ATCom AU-100 - * http://www.atcom.cn/products.html - * http://www.packetizer.com/products/au100/ - * http://www.voip-info.org/wiki/view/AU-100 - * - * Contributed by [email protected] - */ -static unsigned short keymap_atcom(int scancode) -{ - switch (scancode) { /* phone key: */ - case 0x82: return KEY_NUMERIC_0; /* 0 */ - case 0x11: return KEY_NUMERIC_1; /* 1 */ - case 0x12: return KEY_NUMERIC_2; /* 2 */ - case 0x14: return KEY_NUMERIC_3; /* 3 */ - case 0x21: return KEY_NUMERIC_4; /* 4 */ - case 0x22: return KEY_NUMERIC_5; /* 5 */ - case 0x24: return KEY_NUMERIC_6; /* 6 */ - case 0x41: return KEY_NUMERIC_7; /* 7 */ - case 0x42: return KEY_NUMERIC_8; /* 8 */ - case 0x44: return KEY_NUMERIC_9; /* 9 */ - case 0x84: return KEY_NUMERIC_POUND; /* # */ - case 0x81: return KEY_NUMERIC_STAR; /* * */ - case 0x18: return KEY_ENTER; /* pickup */ - case 0x28: return KEY_ESC; /* hangup */ - case 0x48: return KEY_LEFT; /* left arrow */ - case 0x88: return KEY_RIGHT; /* right arrow */ - default: return special_keymap(scancode); - } -} - -static unsigned short (*keymap)(int) = keymap_kip1000; - -/* - * Completes a request by converting the data into events for the - * input subsystem. - */ -static void report_key(struct cm109_dev *dev, int key) -{ - struct input_dev *idev = dev->idev; - - if (dev->key_code >= 0) { - /* old key up */ - input_report_key(idev, dev->key_code, 0); - } - - dev->key_code = key; - if (key >= 0) { - /* new valid key */ - input_report_key(idev, key, 1); - } - - input_sync(idev); -} - -/* - * Converts data of special key presses (volume, mute) into events - * for the input subsystem, sends press-n-release for mute keys. - */ -static void cm109_report_special(struct cm109_dev *dev) -{ - static const u8 autorelease = RECORD_MUTE | PLAYBACK_MUTE; - struct input_dev *idev = dev->idev; - u8 data = dev->irq_data->byte[HID_IR0]; - unsigned short keycode; - int i; - - for (i = 0; i < 4; i++) { - keycode = dev->keymap[0xff + BIT(i)]; - if (keycode == KEY_RESERVED) - continue; - - input_report_key(idev, keycode, data & BIT(i)); - if (data & autorelease & BIT(i)) { - input_sync(idev); - input_report_key(idev, keycode, 0); - } - } - input_sync(idev); -} - -/****************************************************************************** - * CM109 usb communication interface - *****************************************************************************/ - -static void cm109_submit_buzz_toggle(struct cm109_dev *dev) -{ - int error; - - if (dev->buzzer_state) - dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; - else - dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; - - error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); - if (error) - dev_err(&dev->intf->dev, - "%s: usb_submit_urb (urb_ctl) failed %d\n", - __func__, error); -} - -static void cm109_submit_ctl(struct cm109_dev *dev) -{ - int error; - - guard(spinlock_irqsave)(&dev->ctl_submit_lock); - - dev->irq_urb_pending = 0; - - if (unlikely(dev->shutdown)) - return; - - if (dev->buzzer_state) - dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; - else - dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; - - dev->ctl_data->byte[HID_OR1] = dev->keybit; - dev->ctl_data->byte[HID_OR2] = dev->keybit; - - dev->buzzer_pending = 0; - dev->ctl_urb_pending = 1; - - error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); - if (error) - dev_err(&dev->intf->dev, - "%s: usb_submit_urb (urb_ctl) failed %d\n", - __func__, error); -} - -/* - * IRQ handler - */ -static void cm109_urb_irq_callback(struct urb *urb) -{ - struct cm109_dev *dev = urb->context; - const int status = urb->status; - - dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n", - dev->irq_data->byte[0], - dev->irq_data->byte[1], - dev->irq_data->byte[2], - dev->irq_data->byte[3], - dev->keybit); - - if (status) { - if (status == -ESHUTDOWN) - return; - dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", - __func__, status); - goto out; - } - - /* Special keys */ - cm109_report_special(dev); - - /* Scan key column */ - if (dev->keybit == 0xf) { - - /* Any changes ? */ - if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0)) - goto out; - - dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0; - dev->keybit = 0x1; - } else { - report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]); - - dev->keybit <<= 1; - if (dev->keybit > 0x8) - dev->keybit = 0xf; - } - - out: - cm109_submit_ctl(dev); -} - -static void cm109_urb_ctl_callback(struct urb *urb) -{ - struct cm109_dev *dev = urb->context; - const int status = urb->status; - int error; - - dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n", - dev->ctl_data->byte[0], - dev->ctl_data->byte[1], - dev->ctl_data->byte[2], - dev->ctl_data->byte[3]); - - if (status) { - if (status == -ESHUTDOWN) - return; - dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", - __func__, status); - } - - guard(spinlock_irqsave)(&dev->ctl_submit_lock); - - dev->ctl_urb_pending = 0; - - if (unlikely(dev->shutdown)) - return; - - if (dev->buzzer_pending || status) { - dev->buzzer_pending = 0; - dev->ctl_urb_pending = 1; - cm109_submit_buzz_toggle(dev); - } else if (likely(!dev->irq_urb_pending)) { - /* ask for key data */ - dev->irq_urb_pending = 1; - error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC); - if (error) - dev_err(&dev->intf->dev, - "%s: usb_submit_urb (urb_irq) failed %d\n", - __func__, error); - } -} - -static void cm109_toggle_buzzer_async(struct cm109_dev *dev) -{ - guard(spinlock_irqsave)(&dev->ctl_submit_lock); - - if (dev->ctl_urb_pending) { - /* URB completion will resubmit */ - dev->buzzer_pending = 1; - } else { - dev->ctl_urb_pending = 1; - cm109_submit_buzz_toggle(dev); - } -} - -static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) -{ - int error; - - if (on) - dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; - else - dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; - - error = usb_control_msg(dev->udev, - usb_sndctrlpipe(dev->udev, 0), - dev->ctl_req->bRequest, - dev->ctl_req->bRequestType, - le16_to_cpu(dev->ctl_req->wValue), - le16_to_cpu(dev->ctl_req->wIndex), - dev->ctl_data, - USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); - if (error < 0 && error != -EINTR) - dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n", - __func__, error); -} - -static void cm109_stop_traffic(struct cm109_dev *dev) -{ - dev->shutdown = 1; - /* - * Make sure other CPUs see this - */ - smp_wmb(); - - usb_kill_urb(dev->urb_ctl); - usb_kill_urb(dev->urb_irq); - - cm109_toggle_buzzer_sync(dev, 0); - - dev->shutdown = 0; - smp_wmb(); -} - -static void cm109_restore_state(struct cm109_dev *dev) -{ - if (dev->open) { - /* - * Restore buzzer state. - * This will also kick regular URB submission - */ - cm109_toggle_buzzer_async(dev); - } -} - -/****************************************************************************** - * input event interface - *****************************************************************************/ - -static int cm109_input_open(struct input_dev *idev) -{ - struct cm109_dev *dev = input_get_drvdata(idev); - int error; - - error = usb_autopm_get_interface(dev->intf); - if (error < 0) { - dev_err(&idev->dev, "%s - cannot autoresume, result %d\n", - __func__, error); - return error; - } - - scoped_guard(mutex, &dev->pm_mutex) { - dev->buzzer_state = 0; - dev->key_code = -1; /* no keys pressed */ - dev->keybit = 0xf; - - /* issue INIT */ - dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF; - dev->ctl_data->byte[HID_OR1] = dev->keybit; - dev->ctl_data->byte[HID_OR2] = dev->keybit; - dev->ctl_data->byte[HID_OR3] = 0x00; - - dev->ctl_urb_pending = 1; - error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL); - if (!error) { - dev->open = 1; - return 0; - } - } - - dev->ctl_urb_pending = 0; - usb_autopm_put_interface(dev->intf); - - dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n", - __func__, error); - - return error; -} - -static void cm109_input_close(struct input_dev *idev) -{ - struct cm109_dev *dev = input_get_drvdata(idev); - - scoped_guard(mutex, &dev->pm_mutex) { - /* - * Once we are here event delivery is stopped so we - * don't need to worry about someone starting buzzer - * again - */ - cm109_stop_traffic(dev); - dev->open = 0; - } - - usb_autopm_put_interface(dev->intf); -} - -static int cm109_input_ev(struct input_dev *idev, unsigned int type, - unsigned int code, int value) -{ - struct cm109_dev *dev = input_get_drvdata(idev); - - dev_dbg(&dev->intf->dev, - "input_ev: type=%u code=%u value=%d\n", type, code, value); - - if (type != EV_SND) - return -EINVAL; - - switch (code) { - case SND_TONE: - case SND_BELL: - dev->buzzer_state = !!value; - if (!dev->resetting) - cm109_toggle_buzzer_async(dev); - return 0; - - default: - return -EINVAL; - } -} - - -/****************************************************************************** - * Linux interface and usb initialisation - *****************************************************************************/ - -struct driver_info { - char *name; -}; - -static const struct driver_info info_cm109 = { - .name = "CM109 USB driver", -}; - -enum { - VENDOR_ID = 0x0d8c, /* C-Media Electronics */ - PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */ -}; - -/* table of devices that work with this driver */ -static const struct usb_device_id cm109_usb_table[] = { - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE | - USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = VENDOR_ID, - .idProduct = PRODUCT_ID_CM109, - .bInterfaceClass = USB_CLASS_HID, - .bInterfaceSubClass = 0, - .bInterfaceProtocol = 0, - .driver_info = (kernel_ulong_t) &info_cm109 - }, - /* you can add more devices here with product ID 0x0008 - 0x000f */ - { } -}; - -static void cm109_usb_cleanup(struct cm109_dev *dev) -{ - kfree(dev->ctl_req); - usb_free_coherent(dev->udev, USB_PKT_LEN, dev->ctl_data, dev->ctl_dma); - usb_free_coherent(dev->udev, USB_PKT_LEN, dev->irq_data, dev->irq_dma); - - usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */ - usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */ - kfree(dev); -} - -static void cm109_usb_disconnect(struct usb_interface *interface) -{ - struct cm109_dev *dev = usb_get_intfdata(interface); - - usb_set_intfdata(interface, NULL); - input_unregister_device(dev->idev); - cm109_usb_cleanup(dev); -} - -static int cm109_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct driver_info *nfo = (struct driver_info *)id->driver_info; - struct usb_host_interface *interface; - struct usb_endpoint_descriptor *endpoint; - struct cm109_dev *dev; - struct input_dev *input_dev = NULL; - int ret, pipe, i; - int error = -ENOMEM; - - interface = intf->cur_altsetting; - - if (interface->desc.bNumEndpoints < 1) - return -ENODEV; - - endpoint = &interface->endpoint[0].desc; - - if (!usb_endpoint_is_int_in(endpoint)) - return -ENODEV; - - dev = kzalloc_obj(*dev); - if (!dev) - return -ENOMEM; - - spin_lock_init(&dev->ctl_submit_lock); - mutex_init(&dev->pm_mutex); - - dev->udev = udev; - dev->intf = intf; - - dev->idev = input_dev = input_allocate_device(); - if (!input_dev) - goto err_out; - - /* allocate usb buffers */ - dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN, - GFP_KERNEL, &dev->irq_dma); - if (!dev->irq_data) - goto err_out; - - dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN, - GFP_KERNEL, &dev->ctl_dma); - if (!dev->ctl_data) - goto err_out; - - dev->ctl_req = kmalloc_obj(*(dev->ctl_req)); - if (!dev->ctl_req) - goto err_out; - - /* allocate urb structures */ - dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->urb_irq) - goto err_out; - - dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->urb_ctl) - goto err_out; - - /* get a handle to the interrupt data pipe */ - pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); - ret = usb_maxpacket(udev, pipe); - if (ret != USB_PKT_LEN) - dev_err(&intf->dev, "invalid payload size %d, expected %d\n", - ret, USB_PKT_LEN); - - /* initialise irq urb */ - usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data, - USB_PKT_LEN, - cm109_urb_irq_callback, dev, endpoint->bInterval); - dev->urb_irq->transfer_dma = dev->irq_dma; - dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - dev->urb_irq->dev = udev; - - /* initialise ctl urb */ - dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | - USB_DIR_OUT; - dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION; - dev->ctl_req->wValue = cpu_to_le16(0x200); - dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber); - dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN); - - usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0), - (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN, - cm109_urb_ctl_callback, dev); - dev->urb_ctl->transfer_dma = dev->ctl_dma; - dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - dev->urb_ctl->dev = udev; - - /* find out the physical bus location */ - usb_make_path(udev, dev->phys, sizeof(dev->phys)); - strlcat(dev->phys, "/input0", sizeof(dev->phys)); - - /* register settings for the input device */ - input_dev->name = nfo->name; - input_dev->phys = dev->phys; - usb_to_input_id(udev, &input_dev->id); - input_dev->dev.parent = &intf->dev; - - input_set_drvdata(input_dev, dev); - input_dev->open = cm109_input_open; - input_dev->close = cm109_input_close; - input_dev->event = cm109_input_ev; - - input_dev->keycode = dev->keymap; - input_dev->keycodesize = sizeof(unsigned char); - input_dev->keycodemax = ARRAY_SIZE(dev->keymap); - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND); - input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE); - - /* register available key events */ - for (i = 0; i < KEYMAP_SIZE; i++) { - unsigned short k = keymap(i); - dev->keymap[i] = k; - __set_bit(k, input_dev->keybit); - } - __clear_bit(KEY_RESERVED, input_dev->keybit); - - error = input_register_device(dev->idev); - if (error) - goto err_out; - - usb_set_intfdata(intf, dev); - - return 0; - - err_out: - input_free_device(input_dev); - cm109_usb_cleanup(dev); - return error; -} - -static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message) -{ - struct cm109_dev *dev = usb_get_intfdata(intf); - - dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event); - - guard(mutex)(&dev->pm_mutex); - - cm109_stop_traffic(dev); - - return 0; -} - -static int cm109_usb_resume(struct usb_interface *intf) -{ - struct cm109_dev *dev = usb_get_intfdata(intf); - - dev_info(&intf->dev, "cm109: usb_resume\n"); - - guard(mutex)(&dev->pm_mutex); - - cm109_restore_state(dev); - - return 0; -} - -static int cm109_usb_pre_reset(struct usb_interface *intf) -{ - struct cm109_dev *dev = usb_get_intfdata(intf); - - mutex_lock(&dev->pm_mutex); - - /* - * Make sure input events don't try to toggle buzzer - * while we are resetting - */ - dev->resetting = 1; - smp_wmb(); - - cm109_stop_traffic(dev); - - return 0; -} - -static int cm109_usb_post_reset(struct usb_interface *intf) -{ - struct cm109_dev *dev = usb_get_intfdata(intf); - - dev->resetting = 0; - smp_wmb(); - - cm109_restore_state(dev); - - mutex_unlock(&dev->pm_mutex); - - return 0; -} - -static struct usb_driver cm109_driver = { - .name = "cm109", - .probe = cm109_usb_probe, - .disconnect = cm109_usb_disconnect, - .suspend = cm109_usb_suspend, - .resume = cm109_usb_resume, - .reset_resume = cm109_usb_resume, - .pre_reset = cm109_usb_pre_reset, - .post_reset = cm109_usb_post_reset, - .id_table = cm109_usb_table, - .supports_autosuspend = 1, -}; - -static int __init cm109_select_keymap(void) -{ - /* Load the phone keymap */ - if (!strcasecmp(phone, "kip1000")) { - keymap = keymap_kip1000; - printk(KERN_INFO KBUILD_MODNAME ": " - "Keymap for Komunikate KIP1000 phone loaded\n"); - } else if (!strcasecmp(phone, "gtalk")) { - keymap = keymap_gtalk; - printk(KERN_INFO KBUILD_MODNAME ": " - "Keymap for Genius G-talk phone loaded\n"); - } else if (!strcasecmp(phone, "usbph01")) { - keymap = keymap_usbph01; - printk(KERN_INFO KBUILD_MODNAME ": " - "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n"); - } else if (!strcasecmp(phone, "atcom")) { - keymap = keymap_atcom; - printk(KERN_INFO KBUILD_MODNAME ": " - "Keymap for ATCom AU-100 phone loaded\n"); - } else { - printk(KERN_ERR KBUILD_MODNAME ": " - "Unsupported phone: %s\n", phone); - return -EINVAL; - } - - return 0; -} - -static int __init cm109_init(void) -{ - int err; - - err = cm109_select_keymap(); - if (err) - return err; - - err = usb_register(&cm109_driver); - if (err) - return err; - - printk(KERN_INFO KBUILD_MODNAME ": " - DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n"); - - return 0; -} - -static void __exit cm109_exit(void) -{ - usb_deregister(&cm109_driver); -} - -module_init(cm109_init); -module_exit(cm109_exit); - -MODULE_DEVICE_TABLE(usb, cm109_usb_table); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); -- 2.56.0.567.gdb80ae8cd5-goog
