To be able to re-use the schedule_reconstruction5() code in RAID-6
case, this should handle Q-parity strip appropriately. This patch
introduces this.
Signed-off-by: Yuri Tikhonov <[EMAIL PROTECTED]>
Signed-off-by: Ilya Yanok <[EMAIL PROTECTED]>
---
drivers/md/raid5.c | 18 ++++++++++++++----
1 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 5b44d71..4495df6 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1887,10 +1887,11 @@ static void compute_block_2(struct stripe_head *sh, int
dd_idx1, int dd_idx2)
}
static void
-schedule_reconstruction5(struct stripe_head *sh, struct stripe_head_state *s,
+schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
int rcw, int expand)
{
int i, pd_idx = sh->pd_idx, disks = sh->disks;
+ int level = sh->raid_conf->level;
if (rcw) {
/* if we are not expanding this is a proper write request, and
@@ -1916,10 +1917,12 @@ schedule_reconstruction5(struct stripe_head *sh, struct
stripe_head_state *s,
s->locked++;
}
}
- if (s->locked + 1 == disks)
+ if ((level == 5 && s->locked + 1 == disks) ||
+ (level == 6 && s->locked + 2 == disks))
if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
atomic_inc(&sh->raid_conf->pending_full_writes);
} else {
+ BUG_ON(level == 6);
BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
@@ -1951,6 +1954,13 @@ schedule_reconstruction5(struct stripe_head *sh, struct
stripe_head_state *s,
clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
s->locked++;
+ if (level == 6) {
+ int qd_idx = raid6_next_disk(pd_idx, disks);
+ set_bit(R5_LOCKED, &sh->dev[qd_idx].flags);
+ clear_bit(R5_UPTODATE, &sh->dev[qd_idx].flags);
+ s->locked++;
+ }
+
pr_debug("%s: stripe %llu locked: %d ops_request: %lx\n",
__func__, (unsigned long long)sh->sector,
s->locked, s->ops_request);
@@ -2412,7 +2422,7 @@ static void handle_stripe_dirtying5(raid5_conf_t *conf,
if ((s->req_compute || !test_bit(STRIPE_COMPUTE_RUN, &sh->state)) &&
(s->locked == 0 && (rcw == 0 || rmw == 0) &&
!test_bit(STRIPE_BIT_DELAY, &sh->state)))
- schedule_reconstruction5(sh, s, rcw == 0, 0);
+ schedule_reconstruction(sh, s, rcw == 0, 0);
}
static void handle_stripe_dirtying6(raid5_conf_t *conf,
@@ -3005,7 +3015,7 @@ static bool handle_stripe5(struct stripe_head *sh)
sh->disks = conf->raid_disks;
sh->pd_idx = stripe_to_pdidx(sh->sector, conf,
conf->raid_disks);
- schedule_reconstruction5(sh, &s, 1, 1);
+ schedule_reconstruction(sh, &s, 1, 1);
} else if (s.expanded && !sh->reconstruct_state && s.locked == 0) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
--
1.5.6.1
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
