On Thu, 29 Oct 2026 07:27:41 -0400, Lefteris Koutrakis wrote: > Add initial device tree support for the WatchGuard Firebox T30 board. > Enable building firebox-t30.dtb under CONFIG_MPC85xx_RDB in the > arch/powerpc/boot/dts/fsl/Makefile. Document the watchguard vendor > prefix in vendor-prefixes.yaml. > > Signed-off-by: Lefteris Koutrakis <[email protected]> > --- > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > arch/powerpc/boot/dts/fsl/Makefile | 1 + > arch/powerpc/boot/dts/fsl/firebox-t30.dts | 386 ++++++++++++++++++ > 3 files changed, 389 insertions(+) > create mode 100644 arch/powerpc/boot/dts/fsl/firebox-t30.dts >
My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/vendor-prefixes.yaml:2022:1: [error] missing document start "---" (document-start) ./Documentation/devicetree/bindings/vendor-prefixes.yaml:2022:3: [error] syntax error: expected '<document start>', but found '<block mapping start>' (syntax) dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/vendor-prefixes.yaml: ignoring, error parsing file ./Documentation/devicetree/bindings/vendor-prefixes.yaml: error loading YAML: expected a single document in the stream in "./Documentation/devicetree/bindings/vendor-prefixes.yaml", line 4, column 1 but found another document in "./Documentation/devicetree/bindings/vendor-prefixes.yaml", line 2022, column 3 ./Documentation/devicetree/bindings/vendor-prefixes.yaml:2022:3: but found another document doc reference errors (make refcheckdocs): See https://patchwork.kernel.org/project/devicetree/patch/[email protected] The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
