On Thu, Oct 30, 2008 at 12:14 AM, René Bürgel <[EMAIL PROTECTED]> wrote:
> Hi! This patch adds the capability to the mpc52xx-uart to report framing
> errors, parity errors, breaks and overruns to userspace. These values may be
> requested in userspace by using the ioctl TIOCGICOUNT.
>
> Signed-off-by: René Bürgel <[EMAIL PROTECTED]>
Looks mostly good. A few comments below. Make sure you CC: me when
you send the next version (which goes for all 5xxx patches).
g.
>
> Kind regards, René Bürgel
>
> --
> René Bürgel
> Software Engineer
> Unicontrol Systemtechnik GmbH
> OT Dittersbach
> Sachsenburger Weg 34
> 09669 Frankenberg
>
> Tel.: 03 72 06/ 88 73 - 19
> Fax: 03 72 06/ 88 73 - 60
> E-Mail: [EMAIL PROTECTED]
> Internet: www.unicontrol.de
>
>
>
> --- drivers/serial/mpc52xx_uart.c 2008-08-07 15:55:43.000000000 +0200
> +++ drivers/serial/mpc52xx_uart_orig.c 2008-09-11 13:19:12.000000000 +0200
Patch is one level too shallow; for regular tools to work without
manual intervention you should be generating the patch from the
directory above the kernel source.
> @@ -752,10 +752,17 @@
> if (status & MPC52xx_PSC_SR_RB) {
> flag = TTY_BREAK;
> uart_handle_break(port);
> + port->icount.brk++;
> } else if (status & MPC52xx_PSC_SR_PE)
> + {
Please use '} else if () {' form
> flag = TTY_PARITY;
> + port->icount.parity++;
> + }
> else if (status & MPC52xx_PSC_SR_FE)
> + {
ditto
> flag = TTY_FRAME;
> + port->icount.frame++;
> + }
>
> /* Clear error condition */
> out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
> @@ -769,6 +776,7 @@
> * affect the current character
> */
> tty_insert_flip_char(tty, 0, TTY_OVERRUN);
> + port->icount.overrun++;
> }
> }
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
