On Oct 24, 2008, at 11:09 AM, Chris Snook wrote:
Kumar Gala wrote:
On Oct 24, 2008, at 10:17 AM, Chris Snook wrote:
Kumar Gala wrote:
It appears the default IRQ affinity changes from being just cpu 0
to all cpu's. This breaks several PPC SMP systems in which only
a single processor is allowed to be selected as the destination
of the IRQ.
What is the right answer in fixing this? Should we:
cpumask_t irq_default_affinity = 1;
instead of
cpumask_t irq_default_affinity = CPU_MASK_ALL?
On those systems, perhaps, but not universally. There's plenty of
hardware where the physical topology of the machine is abstracted
away from the OS, and you need to leave the mask wide open and let
the APIC figure out where to map the IRQs. Ideally, we should
probably make this decision based on the APIC, but if there's no
PPC hardware that uses this technique, then it would suffice to
make this arch-specific.
What did those systems do before this patch? Its one thing to
expose a mask in the ability to change the default mask in /proc/
irq/default_smp_affinity. Its another (and a regression in my
opinion) to change the mask value itself.
Before the patch they took an extremely long time to boot if they
had storage attached to each node of a multi-chassis system,
performed poorly unless special irqbalance hackery or manual
assignment was used, and imposed artificial restrictions on the
granularity of hardware partitioning to ensure that CPU 0 would
always be a CPU that could service all interrupts necessary to boot
the OS.
As for making it ARCH specific, that doesn't really help since not
all PPC hw has the limitation I spoke of. Not even all MPIC (in
our cases) have the limitation.
What did those systems do before this patch? :)
Making it arch-specific is an extremely simple way to solve your
problem without making trouble for the people who wanted this patch
in the first place. If PPC needs further refinement to handle
particular *PICs, you can implement that without touching any arch-
generic code.
So why not just have x86 startup code set irq_default_affinity =
CPU_MASK_ALL than?
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
