Oh, I forgot to metion just now. The linux is based on a custom built kernel 2.4.22, not from Freescale.
On 10/20/08, mike zheng <[EMAIL PROTECTED]> wrote: > On 10/20/08, Kim Phillips <[EMAIL PROTECTED]> wrote: > > On Mon, 20 Oct 2008 15:00:33 -0700 > > "mike zheng" <[EMAIL PROTECTED]> wrote: > > > > > I have following kernel Oops when I run ifconfig to setup the UEC0 of > > > MPC8360MDS board. There is no hardware problem, the UEC0 runs well > > > under Uboot. > > > > does this occur on vanilla u-boot and kernel versions? if so, which > > ones, and on what board revision? > > > The kernel Oops happened under Linux when I try to use "ifconfig" to > setup the eth0. Under Uboot, the UEC0 works fine. I am able to do > ping, tftp via the ethernet port. > > > > > Call backtrace: > > > C0126890 C00D59D0 C00D761C C012F400 C0130DD4 C01746B4 C017712C > > > C0127770 C004D8B0 C0005ABC 00000000 10001214 100023C4 0FEC4E00 > > > 00000000 > > > > might want to turn on verbose debugging while you're at it. > > Which flag shall I turned on? I am not formaliar to the network driver. > Thanks! > > > > Kim > > > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
