On Tue, Jan 13, 2026 at 11:37:11AM +0900, Koichiro Den wrote:
> Extend the PCI endpoint core to support mapping subranges within a BAR.
> Introduce a new 'submap' field and a 'use_submap' flag in struct
> pci_epf_bar so an endpoint function driver can request inbound mappings
> that fully cover the BAR.
>
> Add a subrange_mapping feature bit to struct pci_epc_features so EPC
> drivers can explicitly advertise support. Make pci_epc_set_bar() reject
> use_submap requests (-EINVAL) when the EPC does not advertise
> subrange_mapping, to avoid silently accepting a configuration that the
> controller cannot implement.
>
> The submap array describes the complete BAR layout (no overlaps and no
> gaps are allowed to avoid exposing untranslated address ranges). This
> provides the generic infrastructure needed to map multiple logical
> regions into a single BAR at different offsets, without assuming a
> controller-specific inbound address translation mechanism. Also, the
> array must be sorted in ascending order by offset.
>
> Signed-off-by: Koichiro Den <[email protected]>
> ---
I think this patch should be after the:
"PCI: endpoint: Add dynamic_inbound_mapping EPC feature"
patch...
> drivers/pci/endpoint/pci-epc-core.c | 3 +++
> include/linux/pci-epc.h | 3 +++
> include/linux/pci-epf.h | 31 +++++++++++++++++++++++++++++
> 3 files changed, 37 insertions(+)
>
> diff --git a/drivers/pci/endpoint/pci-epc-core.c
> b/drivers/pci/endpoint/pci-epc-core.c
> index ca7f19cc973a..8d809a2c3ce9 100644
> --- a/drivers/pci/endpoint/pci-epc-core.c
> +++ b/drivers/pci/endpoint/pci-epc-core.c
> @@ -596,6 +596,9 @@ int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, u8
> vfunc_no,
> if (!epc_features)
> return -EINVAL;
>
> + if (epf_bar->use_submap && !epc_features->subrange_mapping)
> + return -EINVAL;
...then you can change this condition to:
if (epf_bar->use_submap &&
!(epc_features->dynamic_inbound_mapping &&
epc_features->subrange_mapping))
return -EINVAL;
> +
> if (epc_features->bar[bar].type == BAR_RESIZABLE &&
> (epf_bar->size < SZ_1M || (u64)epf_bar->size > (SZ_128G * 1024)))
> return -EINVAL;
> diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
> index 4286bfdbfdfa..898a29e7d6f7 100644
> --- a/include/linux/pci-epc.h
> +++ b/include/linux/pci-epc.h
> @@ -223,6 +223,8 @@ struct pci_epc_bar_desc {
> /**
> * struct pci_epc_features - features supported by a EPC device per function
> * @linkup_notifier: indicate if the EPC device can notify EPF driver on
> link up
> + * @subrange_mapping: indicate if the EPC device can map inbound subranges
> for a
> + * BAR
This text should probably also mention that this feature depends on the
dynamic_inbound_mapping feature.
With those comments fixed, looks good to me:
Reviewed-by: Niklas Cassel <[email protected]>
