Use the napi functions napi_alloc_skb() and napi_gro_receive() instead
of netdev_alloc_skb() and netif_receive_skb() for more efficient packet
receiving. The switch to napi aware functions increases the RX
throughput, reduces the occurrence of retransmissions and improves the
resilience against SKB allocation failures.

Signed-off-by: Florian Fuchs <[email protected]>
---
Note: This change has been tested on real hardware Sony PS3 (CECHL04 PAL),
the patch was tested for many hours, with continuous system load, high
network transfer load and injected failslab errors.

In my tests, the RX throughput increased up to 100% and reduced the
occurrence of retransmissions drastically, with GRO enabled:

iperf3 before and after the commit, where PS3 (with this driver) is on
the receiving side:
Before: [  5]   0.00-10.00  sec   551 MBytes   462 Mbits/sec receiver
After:  [  5]   0.00-10.00  sec  1.09 GBytes   939 Mbits/sec receiver

stats from the sending client to the PS3:
Before: [  5]   0.00-10.00  sec   552 MBytes   463 Mbits/sec  3151 sender
After:  [  5]   0.00-10.00  sec  1.09 GBytes   940 Mbits/sec   37  sender

 drivers/net/ethernet/toshiba/ps3_gelic_net.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c 
b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index 591866fc9055..d35d1f3c10a1 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -364,6 +364,7 @@ static int gelic_card_init_chain(struct gelic_card *card,
  * gelic_descr_prepare_rx - reinitializes a rx descriptor
  * @card: card structure
  * @descr: descriptor to re-init
+ * @napi_mode: is it running in napi poll
  *
  * return 0 on success, <0 on failure
  *
@@ -374,7 +375,8 @@ static int gelic_card_init_chain(struct gelic_card *card,
  * must be a multiple of GELIC_NET_RXBUF_ALIGN.
  */
 static int gelic_descr_prepare_rx(struct gelic_card *card,
-                                 struct gelic_descr *descr)
+                                 struct gelic_descr *descr,
+                                 bool napi_mode)
 {
        static const unsigned int rx_skb_size =
                ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) +
@@ -392,7 +394,10 @@ static int gelic_descr_prepare_rx(struct gelic_card *card,
        descr->hw_regs.payload.dev_addr = 0;
        descr->hw_regs.payload.size = 0;
 
-       descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size);
+       if (napi_mode)
+               descr->skb = napi_alloc_skb(&card->napi, rx_skb_size);
+       else
+               descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size);
        if (!descr->skb) {
                descr->hw_regs.payload.dev_addr = 0; /* tell DMAC don't touch 
memory */
                return -ENOMEM;
@@ -464,7 +469,7 @@ static int gelic_card_fill_rx_chain(struct gelic_card *card)
 
        do {
                if (!descr->skb) {
-                       ret = gelic_descr_prepare_rx(card, descr);
+                       ret = gelic_descr_prepare_rx(card, descr, false);
                        if (ret)
                                goto rewind;
                }
@@ -964,7 +969,7 @@ static void gelic_net_pass_skb_up(struct gelic_descr *descr,
        netdev->stats.rx_bytes += skb->len;
 
        /* pass skb up to stack */
-       netif_receive_skb(skb);
+       napi_gro_receive(&card->napi, skb);
 }
 
 /**
@@ -1069,7 +1074,7 @@ static int gelic_card_decode_one_descr(struct gelic_card 
*card)
        /*
         * this call can fail, propagate the error
         */
-       prepare_rx_ret = gelic_descr_prepare_rx(card, descr);
+       prepare_rx_ret = gelic_descr_prepare_rx(card, descr, true);
        if (prepare_rx_ret)
                return prepare_rx_ret;
 

base-commit: ff736a286116d462a4067ba258fa351bc0b4ed80
-- 
2.43.0


Reply via email to