In the standalone setup the board's CPLD disables the PCI internal
arbiter, thus any access to the PCI bus will hang the board.
When there is no PCI arbiter on the bus the u-boot marks the PCI
bus as broken and we should not try to probe it.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/83xx/mpc837x_mds.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c
b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index be62de2..8bb13c8 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -85,8 +85,14 @@ static void __init mpc837x_mds_setup_arch(void)
ppc_md.progress("mpc837x_mds_setup_arch()", 0);
#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+ for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") {
+ if (!of_device_is_available(np)) {
+ pr_warning("%s: disabled by the firmware.\n",
+ np->full_name);
+ continue;
+ }
mpc83xx_add_bridge(np);
+ }
#endif
mpc837xmds_usb_cfg();
}
--
1.5.6.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
