Kumar Gala wrote: > On Sep 24, 2008, at 4:53 PM, Becky Bruce wrote: > >> For many of the embedded boards, "model" and "Machine" are printing >> the same thing; remove the redundant code and allow the generic >> show_cpuinfo to print the model information. >> >> Signed-off-by: Becky Bruce <[EMAIL PROTECTED]> --- >> arch/powerpc/platforms/85xx/mpc85xx_ads.c | 1 - >> arch/powerpc/platforms/85xx/sbc8560.c | 1 - >> arch/powerpc/platforms/86xx/gef_sbc610.c | 8 -------- >> arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 8 -------- >> arch/powerpc/platforms/86xx/sbc8641d.c | 8 -------- >> arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 1 - >> 6 files changed, 0 insertions(+), 27 deletions(-) > > Do any of the board maintainers have issue with this change? Martyn, > Paul? > > I'm fine w/it for the FSL ones. > > - k
No problem here. Martyn -- Martyn Welch MEng MPhil MIET Principal Software Engineer GE Fanuc Intelligent Platforms Tove Valley Business Park, Towcester, Northants, NN12 6PF, United Kingdom Telephone: +44 (0) 1327 359444 Direct Dial: +44 (0) 1327 322748 Fax: +44 (0) 1327 322800 email: [EMAIL PROTECTED] web: www.gefanuc.com GE Fanuc Intelligent Platforms Ltd, registered in England and Wales (3828642) at 100 Barbirolli Square, Manchester, M2 3AB, VAT GB 729 849 476 GE Fanuc Intelligent Platforms Confidential and Proprietary. If you have received this message in error please notify us immediately and permanently remove it from your system and destroy any printed hardcopies. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
