Hello.
Jon Smirl wrote:
On Sun, Sep 21, 2008 at 4:53 PM, Jon Smirl <[EMAIL PROTECTED]> wrote:
Does anyone have a solution to the problem of printk() to a serial
console blocking interrupts for too long? I'm losing interrupts I need
because my hardware is getting overrun.
netconsole is not an option on mpc5200....
Kernel command line: console=ttyPSC0,115200 rw debug root=/dev/nfs
ip=dhcp
nfsroot=192.168.1.4:/home/OSELAS.BSP-Phytec-phyCORE-MPC5200B-tiny-6/root,v3,tcp
[EMAIL PROTECTED]/eth0,[EMAIL PROTECTED]/00:19:d1:e4:0f:8d
netconsole: local port 6666
netconsole: local IP 192.168.1.11
netconsole: interface eth0
netconsole: remote port 514
netconsole: remote IP 192.168.1.4
netconsole: remote ethernet address 00:19:d1:e4:0f:8d
netconsole: eth0 doesn't support polling, aborting.
netconsole: cleaning up
Implementing the poll_controller() method in the network driver is
usually staightforward.
WBR, Sergei
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
