From: Eric Biggers <ebigg...@google.com>
arch/x86/crypto/Kconfig is sourced only when CONFIG_X86=y, so there is
no need for the symbols defined inside it to depend on X86.
In the case of CRYPTO_TWOFISH_586 and CRYPTO_TWOFISH_X86_64, the
dependency was actually on '(X86 || UML_X86)', which suggests that these
two symbols were intended to be available under user-mode Linux as well.
Yet, again these symbols were defined only when CONFIG_X86=y, so that
was not the case. Just remove this redundant dependency.
Signed-off-by: Eric Biggers <ebigg...@google.com>
---
arch/x86/crypto/Kconfig | 67 ++++++++++++++++++++---------------------
1 file changed, 33 insertions(+), 34 deletions(-)
diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig
index 9a3cade49f63..b4df6cf37e0e 100644
--- a/arch/x86/crypto/Kconfig
+++ b/arch/x86/crypto/Kconfig
@@ -2,11 +2,11 @@
menu "Accelerated Cryptographic Algorithms for CPU (x86)"
config CRYPTO_CURVE25519_X86
tristate
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_KPP
select CRYPTO_LIB_CURVE25519_GENERIC
select CRYPTO_ARCH_HAVE_LIB_CURVE25519
default CRYPTO_LIB_CURVE25519_INTERNAL
help
@@ -15,11 +15,10 @@ config CRYPTO_CURVE25519_X86
Architecture: x86_64 using:
- ADX (large integer arithmetic)
config CRYPTO_AES_NI_INTEL
tristate "Ciphers: AES, modes: ECB, CBC, CTS, CTR, XCTR, XTS, GCM
(AES-NI/VAES)"
- depends on X86
select CRYPTO_AEAD
select CRYPTO_LIB_AES
select CRYPTO_LIB_GF128MUL
select CRYPTO_ALGAPI
select CRYPTO_SKCIPHER
@@ -35,11 +34,11 @@ config CRYPTO_AES_NI_INTEL
Some algorithm implementations are supported only in 64-bit builds,
and some have additional prerequisites such as AVX2 or AVX512.
config CRYPTO_BLOWFISH_X86_64
tristate "Ciphers: Blowfish, modes: ECB, CBC"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_BLOWFISH_COMMON
imply CRYPTO_CTR
help
Block cipher: Blowfish cipher algorithm
@@ -47,22 +46,22 @@ config CRYPTO_BLOWFISH_X86_64
Architecture: x86_64
config CRYPTO_CAMELLIA_X86_64
tristate "Ciphers: Camellia with modes: ECB, CBC"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
imply CRYPTO_CTR
help
Block cipher: Camellia cipher algorithms
Length-preserving ciphers: Camellia with ECB and CBC modes
Architecture: x86_64
config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
tristate "Ciphers: Camellia with modes: ECB, CBC (AES-NI/AVX)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_CAMELLIA_X86_64
imply CRYPTO_XTS
help
Length-preserving ciphers: Camellia with ECB and CBC modes
@@ -71,22 +70,22 @@ config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
- AES-NI (AES New Instructions)
- AVX (Advanced Vector Extensions)
config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
tristate "Ciphers: Camellia with modes: ECB, CBC (AES-NI/AVX2)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
help
Length-preserving ciphers: Camellia with ECB and CBC modes
Architecture: x86_64 using:
- AES-NI (AES New Instructions)
- AVX2 (Advanced Vector Extensions 2)
config CRYPTO_CAST5_AVX_X86_64
tristate "Ciphers: CAST5 with modes: ECB, CBC (AVX)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_CAST5
select CRYPTO_CAST_COMMON
imply CRYPTO_CTR
help
@@ -98,11 +97,11 @@ config CRYPTO_CAST5_AVX_X86_64
Processes 16 blocks in parallel.
config CRYPTO_CAST6_AVX_X86_64
tristate "Ciphers: CAST6 with modes: ECB, CBC (AVX)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_CAST6
select CRYPTO_CAST_COMMON
imply CRYPTO_XTS
imply CRYPTO_CTR
@@ -115,11 +114,11 @@ config CRYPTO_CAST6_AVX_X86_64
Processes eight blocks in parallel.
config CRYPTO_DES3_EDE_X86_64
tristate "Ciphers: Triple DES EDE with modes: ECB, CBC"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_LIB_DES
imply CRYPTO_CTR
help
Block cipher: Triple DES EDE (FIPS 46-3) cipher algorithm
@@ -129,11 +128,11 @@ config CRYPTO_DES3_EDE_X86_64
Processes one or three blocks in parallel.
config CRYPTO_SERPENT_SSE2_X86_64
tristate "Ciphers: Serpent with modes: ECB, CBC (SSE2)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_SERPENT
imply CRYPTO_CTR
help
Length-preserving ciphers: Serpent cipher algorithm
@@ -144,11 +143,11 @@ config CRYPTO_SERPENT_SSE2_X86_64
Processes eight blocks in parallel.
config CRYPTO_SERPENT_SSE2_586
tristate "Ciphers: Serpent with modes: ECB, CBC (32-bit with SSE2)"
- depends on X86 && !64BIT
+ depends on !64BIT
select CRYPTO_SKCIPHER
select CRYPTO_SERPENT
imply CRYPTO_CTR
help
Length-preserving ciphers: Serpent cipher algorithm
@@ -159,11 +158,11 @@ config CRYPTO_SERPENT_SSE2_586
Processes four blocks in parallel.
config CRYPTO_SERPENT_AVX_X86_64
tristate "Ciphers: Serpent with modes: ECB, CBC (AVX)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_SERPENT
imply CRYPTO_XTS
imply CRYPTO_CTR
help
@@ -175,11 +174,11 @@ config CRYPTO_SERPENT_AVX_X86_64
Processes eight blocks in parallel.
config CRYPTO_SERPENT_AVX2_X86_64
tristate "Ciphers: Serpent with modes: ECB, CBC (AVX2)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SERPENT_AVX_X86_64
help
Length-preserving ciphers: Serpent cipher algorithm
with ECB and CBC modes
@@ -188,11 +187,11 @@ config CRYPTO_SERPENT_AVX2_X86_64
Processes 16 blocks in parallel.
config CRYPTO_SM4_AESNI_AVX_X86_64
tristate "Ciphers: SM4 with modes: ECB, CBC, CTR (AES-NI/AVX)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_ALGAPI
select CRYPTO_SM4
help
Length-preserving ciphers: SM4 cipher algorithms
@@ -208,11 +207,11 @@ config CRYPTO_SM4_AESNI_AVX_X86_64
If unsure, say N.
config CRYPTO_SM4_AESNI_AVX2_X86_64
tristate "Ciphers: SM4 with modes: ECB, CBC, CTR (AES-NI/AVX2)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_ALGAPI
select CRYPTO_SM4
select CRYPTO_SM4_AESNI_AVX_X86_64
help
@@ -229,33 +228,33 @@ config CRYPTO_SM4_AESNI_AVX2_X86_64
If unsure, say N.
config CRYPTO_TWOFISH_586
tristate "Ciphers: Twofish (32-bit)"
- depends on (X86 || UML_X86) && !64BIT
+ depends on !64BIT
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
imply CRYPTO_CTR
help
Block cipher: Twofish cipher algorithm
Architecture: x86 (32-bit)
config CRYPTO_TWOFISH_X86_64
tristate "Ciphers: Twofish"
- depends on (X86 || UML_X86) && 64BIT
+ depends on 64BIT
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
imply CRYPTO_CTR
help
Block cipher: Twofish cipher algorithm
Architecture: x86_64
config CRYPTO_TWOFISH_X86_64_3WAY
tristate "Ciphers: Twofish with modes: ECB, CBC (3-way parallel)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
help
Length-preserving cipher: Twofish cipher algorithm
@@ -266,11 +265,11 @@ config CRYPTO_TWOFISH_X86_64_3WAY
Processes three blocks in parallel, better utilizing resources of
out-of-order CPUs.
config CRYPTO_TWOFISH_AVX_X86_64
tristate "Ciphers: Twofish with modes: ECB, CBC (AVX)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
select CRYPTO_TWOFISH_X86_64_3WAY
imply CRYPTO_XTS
@@ -283,11 +282,11 @@ config CRYPTO_TWOFISH_AVX_X86_64
Processes eight blocks in parallel.
config CRYPTO_ARIA_AESNI_AVX_X86_64
tristate "Ciphers: ARIA with modes: ECB, CTR (AES-NI/AVX/GFNI)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_ALGAPI
select CRYPTO_ARIA
help
Length-preserving cipher: ARIA cipher algorithms
@@ -300,11 +299,11 @@ config CRYPTO_ARIA_AESNI_AVX_X86_64
Processes 16 blocks in parallel.
config CRYPTO_ARIA_AESNI_AVX2_X86_64
tristate "Ciphers: ARIA with modes: ECB, CTR (AES-NI/AVX2/GFNI)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_ALGAPI
select CRYPTO_ARIA
select CRYPTO_ARIA_AESNI_AVX_X86_64
help
@@ -318,11 +317,11 @@ config CRYPTO_ARIA_AESNI_AVX2_X86_64
Processes 32 blocks in parallel.
config CRYPTO_ARIA_GFNI_AVX512_X86_64
tristate "Ciphers: ARIA with modes: ECB, CTR (AVX512/GFNI)"
- depends on X86 && 64BIT && AS_GFNI
+ depends on 64BIT && AS_GFNI
select CRYPTO_SKCIPHER
select CRYPTO_ALGAPI
select CRYPTO_ARIA
select CRYPTO_ARIA_AESNI_AVX_X86_64
select CRYPTO_ARIA_AESNI_AVX2_X86_64
@@ -336,49 +335,49 @@ config CRYPTO_ARIA_GFNI_AVX512_X86_64
Processes 64 blocks in parallel.
config CRYPTO_CHACHA20_X86_64
tristate
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_LIB_CHACHA_GENERIC
select CRYPTO_ARCH_HAVE_LIB_CHACHA
default CRYPTO_LIB_CHACHA_INTERNAL
config CRYPTO_AEGIS128_AESNI_SSE2
tristate "AEAD ciphers: AEGIS-128 (AES-NI/SSE4.1)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_AEAD
help
AEGIS-128 AEAD algorithm
Architecture: x86_64 using:
- AES-NI (AES New Instructions)
- SSE4.1 (Streaming SIMD Extensions 4.1)
config CRYPTO_NHPOLY1305_SSE2
tristate "Hash functions: NHPoly1305 (SSE2)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_NHPOLY1305
help
NHPoly1305 hash function for Adiantum
Architecture: x86_64 using:
- SSE2 (Streaming SIMD Extensions 2)
config CRYPTO_NHPOLY1305_AVX2
tristate "Hash functions: NHPoly1305 (AVX2)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_NHPOLY1305
help
NHPoly1305 hash function for Adiantum
Architecture: x86_64 using:
- AVX2 (Advanced Vector Extensions 2)
config CRYPTO_BLAKE2S_X86
bool "Hash functions: BLAKE2s (SSSE3/AVX-512)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_LIB_BLAKE2S_GENERIC
select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
help
BLAKE2s cryptographic hash function (RFC 7693)
@@ -386,27 +385,27 @@ config CRYPTO_BLAKE2S_X86
- SSSE3 (Supplemental SSE3)
- AVX-512 (Advanced Vector Extensions-512)
config CRYPTO_POLYVAL_CLMUL_NI
tristate "Hash functions: POLYVAL (CLMUL-NI)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_POLYVAL
help
POLYVAL hash function for HCTR2
Architecture: x86_64 using:
- CLMUL-NI (carry-less multiplication new instructions)
config CRYPTO_POLY1305_X86_64
tristate
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_ARCH_HAVE_LIB_POLY1305
default CRYPTO_LIB_POLY1305_INTERNAL
config CRYPTO_SHA1_SSSE3
tristate "Hash functions: SHA-1 (SSSE3/AVX/AVX2/SHA-NI)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SHA1
select CRYPTO_HASH
help
SHA-1 secure hash algorithm (FIPS 180)
@@ -416,11 +415,11 @@ config CRYPTO_SHA1_SSSE3
- AVX2 (Advanced Vector Extensions 2)
- SHA-NI (SHA Extensions New Instructions)
config CRYPTO_SHA256_SSSE3
tristate "Hash functions: SHA-224 and SHA-256 (SSSE3/AVX/AVX2/SHA-NI)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SHA256
select CRYPTO_HASH
help
SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
@@ -430,11 +429,11 @@ config CRYPTO_SHA256_SSSE3
- AVX2 (Advanced Vector Extensions 2)
- SHA-NI (SHA Extensions New Instructions)
config CRYPTO_SHA512_SSSE3
tristate "Hash functions: SHA-384 and SHA-512 (SSSE3/AVX/AVX2)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_SHA512
select CRYPTO_HASH
help
SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
@@ -443,11 +442,11 @@ config CRYPTO_SHA512_SSSE3
- AVX (Advanced Vector Extensions)
- AVX2 (Advanced Vector Extensions 2)
config CRYPTO_SM3_AVX_X86_64
tristate "Hash functions: SM3 (AVX)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_HASH
select CRYPTO_LIB_SM3
help
SM3 secure hash function as defined by OSCCA GM/T 0004-2012 SM3
@@ -456,11 +455,11 @@ config CRYPTO_SM3_AVX_X86_64
If unsure, say N.
config CRYPTO_GHASH_CLMUL_NI_INTEL
tristate "Hash functions: GHASH (CLMUL-NI)"
- depends on X86 && 64BIT
+ depends on 64BIT
select CRYPTO_CRYPTD
help
GCM GHASH hash function (NIST SP800-38D)
Architecture: x86_64 using:
--
2.49.0
