On Sep 9, 2008, at 2:43 PM, Timur Tabi wrote:
For Freescale 8xxx devices that use an MPIC, the interrupt numbers
in the
device tree must be 16 greater than the values documented in the
reference
manual. In these chips, the MPIC is wired to use the first 16
numbers for
external interrupts, but the documentation numbers internal
interrupts from 0.
In the MPC8610 HPCD device tree, the interrupt properties for the
DMA channels
for DMA2 were not the adjusted values. This patch fixes that.
Signed-off-by: Timur Tabi <[EMAIL PROTECTED]>
---
I have no idea how this was missed for so long, but this patch is a
must-fix for 2.6.27.
(changes for v2: improve changelog text)
arch/powerpc/boot/dts/mpc8610_hpcd.dts | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
applied.
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
