On Thu, Sep 04, 2008 at 11:55:02AM +0200, Matthias Fuchs wrote:
>Hi,
>
>I added support for the Sequoia on-board I2C temperature sensor to the device.
>I am not sure if there is any node naming convention for such devices.
>The needed I2C driver can be found under drivers/hwmon in the kernel sources,
>so I found "hwmon" suitable for the node.
>
>Do we want to add this to the sequoia dts file? If this is how it should be
>done,
>I will commit a proper patch.
See comments below. Out of curiosity, do you have a working driver and
setup with this?
>diff --git a/arch/powerpc/boot/dts/sequoia.dts
>b/arch/powerpc/boot/dts/sequoia.dts
>index 72d15f0..82fdfdf 100644
>--- a/arch/powerpc/boot/dts/sequoia.dts
>+++ b/arch/powerpc/boot/dts/sequoia.dts
>@@ -246,13 +246,23 @@
> };
>
> IIC0: [EMAIL PROTECTED] {
>+ #address-cells = <1>;
>+ #size-cells = <0>;
> compatible = "ibm,iic-440epx", "ibm,iic";
> reg = <0xef600700 0x00000014>;
> interrupt-parent = <&UIC0>;
> interrupts = <0x2 0x4>;
>+
>+ [EMAIL PROTECTED] {
>+ device_type = "hwmon";
We don't need device_type. Particularly not a new one like this.
>+ compatible = "analog,ad7414";
Perhaps 'compatible = "analog,ad7417", "amcc,hwmon-440epx";'
josh
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev