Hello everyone, This is V3 of the phylink conversion for ucc_geth.
The main changes in this V3 are related to error handling in the patches 1 and 10 to report an error when the deprecated "interface" property is found in DT. Doing so, I found and addressed some issues with the jump labels in the error paths, impacting patches 1 and 10. The rest of the changes are just a rebase on net-next. Some of the V2 changes haven't been reviewed, so I stress out that I'm still uncertain about the way WoL is handled is patches 4 and 10. Thanks, Maxime Link to V1: https://lore.kernel.org/netdev/20241107170255.1058124-1-maxime.chevall...@bootlin.com/ Link to V2: https://lore.kernel.org/netdev/20241114153603.307872-1-maxime.chevall...@bootlin.com/ Maxime Chevallier (10): net: freescale: ucc_geth: Drop support for the "interface" DT property net: freescale: ucc_geth: split adjust_link for phylink conversion net: freescale: ucc_geth: Use netdev->phydev to access the PHY net: freescale: ucc_geth: Fix WOL configuration net: freescale: ucc_geth: Use the correct type to store WoL opts net: freescale: ucc_geth: Simplify frame length check net: freescale: ucc_geth: Hardcode the preamble length to 7 bytes net: freescale: ucc_geth: Move the serdes configuration around net: freescale: ucc_geth: Introduce a helper to check Reduced modes net: freescale: ucc_geth: phylink conversion drivers/net/ethernet/freescale/Kconfig | 3 +- drivers/net/ethernet/freescale/ucc_geth.c | 602 +++++++----------- drivers/net/ethernet/freescale/ucc_geth.h | 22 +- .../net/ethernet/freescale/ucc_geth_ethtool.c | 74 +-- 4 files changed, 266 insertions(+), 435 deletions(-) -- 2.47.0
