On Thu, Aug 28, 2008 at 05:43:33PM +0800, Li Yang wrote:
> Some of Freescale SoC chips have a QE or CPM co-processor which
> supports full speed USB. The driver adds device mode support
> of both QE and CPM USB controller to Linux USB gadget. The
> driver is tested with MPC8360 and MPC8272, and should work with
> other models having QE/CPM given minor tweaks.
>
> Signed-off-by: Xie Xiaobo <[EMAIL PROTECTED]>
> Signed-off-by: Li Yang <[EMAIL PROTECTED]>
> ---
Just found a recursive locking bug:
[...]
> +static int reset_queues(struct qe_udc *udc)
> +{
Note: this function is called from the IRQ, the IRQ handler
grabs udc->lock spinlock..
> + u8 pipe;
> +
> + for (pipe = 0; pipe < USB_MAX_ENDPOINTS; pipe++)
> + udc_reset_ep_queue(udc, pipe);
> +
> + /* report disconnect; the driver is already quiesced */
> + udc->driver->disconnect(&udc->gadget);
In the disconnect(), g_ether driver will immediately call
qe_ep_disable() function which will try to grab &udc->lock
spinlock once again..
Not sure how to fix this properly... :-/
p.s. the same bug exists in omap_udc.c, pxa27x_udc.c and probably
other drivers as well... The only reason why it does not exploit
in most cases is that the spin_lock_irqsave for !SMP case turns
into simple local_irq_save().
--
Anton Vorontsov
email: [EMAIL PROTECTED]
irc://irc.freenode.net/bd2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
