On 18/10/24 12:10, kernel test robot wrote: > tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git > master > head: 7df1e7189cecb6965ce672e820a5ec6cf499b65b > commit: e7af7d13316dc5e2293c4f777f71bd8331f5d7a5 [4889/5321] dt-bindings: > reset: syscon-reboot: Add reg property > :::::: branch date: 11 hours ago > :::::: commit date: 23 hours ago > config: powerpc-randconfig-052-20241017 > (https://download.01.org/0day-ci/archive/20241018/202410180305.zflgnzvb-...@intel.com/config) > compiler: powerpc-linux-gcc (GCC) 14.1.0 > dtschema version: 2024.10.dev6+g12c3cd5 > reproduce (this is a W=1 build): > (https://download.01.org/0day-ci/archive/20241018/202410180305.zflgnzvb-...@intel.com/reproduce) > > If you fix the issue in a separate patch/commit (i.e. not just a new version > of > the same patch/commit), kindly add following tags > | Reported-by: kernel test robot <l...@intel.com> > | Closes: https://lore.kernel.org/r/202410180305.zflgnzvb-...@intel.com/ > > dtcheck warnings: (new ones prefixed by >>) > arch/powerpc/boot/dts/turris1x.dtb: nor@0,0: $nodename:0: 'nor@0,0' does > not match '^(flash|.*sram|nand)(@.*)?$' > from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml# > arch/powerpc/boot/dts/turris1x.dtb: /localbus@ffe05000/nand@1,0: failed > to match any schema with compatible: ['fsl,p2020-fcm-nand', > 'fsl,elbc-fcm-nand'] > arch/powerpc/boot/dts/turris1x.dtb: /localbus@ffe05000/nand@1,0: failed > to match any schema with compatible: ['fsl,p2020-fcm-nand', > 'fsl,elbc-fcm-nand'] > arch/powerpc/boot/dts/turris1x.dtb: cpld@3,0: $nodename:0: 'cpld@3,0' > does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' > from schema $id: http://devicetree.org/schemas/simple-bus.yaml# > arch/powerpc/boot/dts/turris1x.dtb: /localbus@ffe05000/cpld@3,0: failed > to match any schema with compatible: ['cznic,turris1x-cpld', > 'fsl,p1021rdb-pc-cpld', 'simple-bus', 'syscon'] > arch/powerpc/boot/dts/turris1x.dtb: /localbus@ffe05000/cpld@3,0: failed > to match any schema with compatible: ['cznic,turris1x-cpld', > 'fsl,p1021rdb-pc-cpld', 'simple-bus', 'syscon'] > arch/powerpc/boot/dts/turris1x.dtb: watchdog@2: Unevaluated properties > are not allowed ('gpios' was unexpected) > from schema $id: > http://devicetree.org/schemas/watchdog/maxim,max63xx.yaml# >>> arch/powerpc/boot/dts/turris1x.dtb: reboot@d: {'compatible': >>> ['syscon-reboot'], 'reg': [[13, 1]], 'offset': 13, 'mask': 1, 'value': 1, >>> 'priority': 64, '$nodename': ['reboot@d']} is valid under each of >>> {'required': ['reg']}, {'required': ['offset']}
This will be because of my changes to add reg and the oneOf: offset, reg to syscon-reboot.yaml. Prior to this I'm guessing there was either a different warning or possibly just nothing since the unused property was "reg". How do we want to handle this? I could probably change oneOf to anyOf in the schema which would silence the warning. Technically it should be fine to remove the reg property from the turris1x.dts as nothing was using that and even after my changes offset is used first. Or we could just do nothing which I'm fine with. > from schema $id: > http://devicetree.org/schemas/power/reset/syscon-reboot.yaml# > arch/powerpc/boot/dts/turris1x.dtb: > /localbus@ffe05000/cpld@3,0/led-controller@13: failed to match any schema > with compatible: ['cznic,turris1x-leds'] > arch/powerpc/boot/dts/turris1x.dtb: pcie@ffe08000: pcie@0:interrupts:0:0: > 24 is not one of [1, 2, 3, 4] > from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml# > arch/powerpc/boot/dts/turris1x.dtb: pcie@ffe08000: pcie@0:interrupts:0: > [24, 2, 0, 0] is too long > from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml# > arch/powerpc/boot/dts/turris1x.dtb: /pcie@ffe08000: failed to match any > schema with compatible: ['fsl,mpc8548-pcie'] > arch/powerpc/boot/dts/turris1x.dtb: pcie@ffe09000: pcie@0:interrupts:0:0: > 25 is not one of [1, 2, 3, 4] > from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml# > arch/powerpc/boot/dts/turris1x.dtb: pcie@ffe09000: pcie@0:interrupts:0: > [25, 2, 0, 0] is too long >
