On Mon, Aug 25, 2008 at 07:27:36PM +0400, Anton Vorontsov wrote:
> Various changes to support QE USB Host on a MPC8360E-MDS board:
> 
> - Update the device tree per QE USB bindings;
> - Configure QE Par IO;
> - Set up BCSR for both USB Host and Peripheral modes;
> - Add timer (GTM) node;
> - Add gpio-controller node for BCSR13 bank;
> - Select FSL_GTM, QE_GPIO and OF_SIMPLE_GPIO.
> 
> The work is loosely based on Li Yang's patch[1], which is used
> to support peripheral mode only.
> 
> [1] http://ozlabs.org/pipermail/linuxppc-dev/2008-August/061357.html
> 
> The s-o-b line of the original patch preserved here.
> 
> Signed-off-by: Li Yang <[EMAIL PROTECTED]>
> Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
> ---
>  arch/powerpc/boot/dts/mpc836x_mds.dts     |   44 +++++++++++++++++++++++++++-
>  arch/powerpc/platforms/83xx/Kconfig       |    3 ++
>  arch/powerpc/platforms/83xx/mpc836x_mds.c |   31 +++++++++++++++++++-
>  3 files changed, 75 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts 
> b/arch/powerpc/boot/dts/mpc836x_mds.dts
> index ada8446..0be98f3 100644
> --- a/arch/powerpc/boot/dts/mpc836x_mds.dts
> +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
> @@ -69,8 +69,19 @@
>               };
>  
>               [EMAIL PROTECTED],0 {
> +                     #address-cells = <1>;
> +                     #size-cells = <1>;
>                       device_type = "board-control";

Not the fault of this patch, obviously, but this device_type should
never have been here.

>                       reg = <1 0 0x8000>;
> +                     ranges = <0 1 0 0x8000>;
> +
> +                     bcsr13: [EMAIL PROTECTED] {
> +                             #gpio-cells = <2>;
> +                             compatible = "fsl,mpc8360mds-bcsr-gpio",
> +                                          "simple-gpio-bank";
> +                             reg = <0xd 1>;
> +                             gpio-controller;
> +                     };
>               };
>       };
>  
> @@ -191,10 +202,21 @@
>               };
>  
>               [EMAIL PROTECTED] {
> +                     #address-cells = <1>;
> +                     #size-cells = <1>;
>                       reg = <0x1400 0x100>;
> +                     ranges = <0 0x1400 0x100>;
>                       device_type = "par_io";

Nor this one

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to