Migrate the AMCC Taishan board to use the ppc44x_simple platform file.

Signed-off-by: Josh Boyer <[EMAIL PROTECTED]>
---
 arch/powerpc/platforms/44x/Kconfig   |    1 +
 arch/powerpc/platforms/44x/Makefile  |    1 -
 arch/powerpc/platforms/44x/taishan.c |   72 ----------------------------------
 3 files changed, 1 insertions(+), 73 deletions(-)
 delete mode 100644 arch/powerpc/platforms/44x/taishan.c

diff --git a/arch/powerpc/platforms/44x/Kconfig 
b/arch/powerpc/platforms/44x/Kconfig
index 84e2a70..e0bea83 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -40,6 +40,7 @@ config TAISHAN
        bool "Taishan"
        depends on 44x
        default n
+       select PPC44x_SIMPLE
        select 440GX
        select PCI
        help
diff --git a/arch/powerpc/platforms/44x/Makefile 
b/arch/powerpc/platforms/44x/Makefile
index a8a92c1..6981331 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -1,7 +1,6 @@
 obj-$(CONFIG_44x)      := misc_44x.o idle.o
 obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
 obj-$(CONFIG_EBONY)    += ebony.o
-obj-$(CONFIG_TAISHAN)  += taishan.o
 obj-$(CONFIG_SAM440EP)         += sam440ep.o
 obj-$(CONFIG_WARP)     += warp.o
 obj-$(CONFIG_WARP)     += warp-nand.o
diff --git a/arch/powerpc/platforms/44x/taishan.c 
b/arch/powerpc/platforms/44x/taishan.c
deleted file mode 100644
index 49c78b2..0000000
--- a/arch/powerpc/platforms/44x/taishan.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Taishan board specific routines based off ebony.c code
- * original copyrights below
- *
- * Matt Porter <[EMAIL PROTECTED]>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
- * Copyright (c) 2003-2005 Zultys Technologies
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 David Gibson <[EMAIL PROTECTED]>, IBM Corporation.
- *
- * Modified from ebony.c for taishan:
- * Copyright 2007 Hugh Blemings <[EMAIL PROTECTED]>, IBM Corporation.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id taishan_of_bus[] = {
-       { .compatible = "ibm,plb4", },
-       { .compatible = "ibm,opb", },
-       { .compatible = "ibm,ebc", },
-       {},
-};
-
-static int __init taishan_device_probe(void)
-{
-       of_platform_bus_probe(NULL, taishan_of_bus, NULL);
-
-       return 0;
-}
-machine_device_initcall(taishan, taishan_device_probe);
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init taishan_probe(void)
-{
-       unsigned long root = of_get_flat_dt_root();
-
-       if (!of_flat_dt_is_compatible(root, "amcc,taishan"))
-               return 0;
-
-       ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
-       return 1;
-}
-
-define_machine(taishan) {
-       .name                   = "Taishan",
-       .probe                  = taishan_probe,
-       .progress               = udbg_progress,
-       .init_IRQ               = uic_init_tree,
-       .get_irq                = uic_get_irq,
-       .restart                = ppc4xx_reset_system,
-       .calibrate_decr         = generic_calibrate_decr,
-};
-- 
1.5.5.1


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to