On Fri, Jun 14, 2024 at 10:56:18PM +0530, Athira Rajeev wrote:
> Add support to capture and parse raw instruction in powerpc.
> Currently, the perf tool infrastructure uses two ways to disassemble
> and understand the instruction. One is objdump and other option is
> via libcapstone.
>
> Currently, the perf tool infrastructure uses "--no-show-raw-insn" option
> with "objdump" while disassemble. Example from powerpc with this option
> for an instruction address is:
>
> Snippet from:
> objdump --start-address=<address> --stop-address=<address> -d
> --no-show-raw-insn -C <vmlinux>
>
> c0000000010224b4: lwz r10,0(r9)
What about removing --no-show-raw-insn and parse the raw byte code in
the output for powerpc? I think it's better to support normal
annotation together.
>
> This line "lwz r10,0(r9)" is parsed to extract instruction name,
> registers names and offset. Also to find whether there is a memory
> reference in the operands, "memory_ref_char" field of objdump is used.
> For x86, "(" is used as memory_ref_char to tackle instructions of the
> form "mov (%rax), %rcx".
>
> In case of powerpc, not all instructions using "(" are the only memory
> instructions. Example, above instruction can also be of extended form (X
> form) "lwzx r10,0,r19". Inorder to easy identify the instruction category
> and extract the source/target registers, patch adds support to use raw
> instruction for powerpc. Approach used is to read the raw instruction
> directly from the DSO file using "dso__data_read_offset" utility which
> is already implemented in perf infrastructure in "util/dso.c".
>
> Example:
>
> 38 01 81 e8 ld r4,312(r1)
>
> Here "38 01 81 e8" is the raw instruction representation. In powerpc,
> this translates to instruction form: "ld RT,DS(RA)" and binary code
> as:
>
> | 58 | RT | RA | DS | |
> -------------------------------------
> 0 6 11 16 30 31
>
> Function "symbol__disassemble_dso" is updated to read raw instruction
> directly from DSO using dso__data_read_offset utility. In case of
> above example, this captures:
> line: 38 01 81 e8
>
> Signed-off-by: Athira Rajeev <atraj...@linux.vnet.ibm.com>
> ---
> tools/perf/util/disasm.c | 98 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 98 insertions(+)
>
> diff --git a/tools/perf/util/disasm.c b/tools/perf/util/disasm.c
> index b5fe3a7508bb..f19496133bf0 100644
> --- a/tools/perf/util/disasm.c
> +++ b/tools/perf/util/disasm.c
> @@ -1586,6 +1586,91 @@ static int symbol__disassemble_capstone(char
> *filename, struct symbol *sym,
> }
> #endif
>
> +static int symbol__disassemble_dso(char *filename, struct symbol *sym,
Maybe rename to symbol__disassemble_raw() ?
> + struct annotate_args *args)
> +{
> + struct annotation *notes = symbol__annotation(sym);
> + struct map *map = args->ms.map;
> + struct dso *dso = map__dso(map);
> + u64 start = map__rip_2objdump(map, sym->start);
> + u64 end = map__rip_2objdump(map, sym->end);
> + u64 len = end - start;
> + u64 offset;
> + int i, count;
> + u8 *buf = NULL;
> + char disasm_buf[512];
> + struct disasm_line *dl;
> + u32 *line;
> +
> + /* Return if objdump is specified explicitly */
> + if (args->options->objdump_path)
> + return -1;
> +
> + pr_debug("Reading raw instruction from : %s using
> dso__data_read_offset\n", filename);
You may want to print the actual offset and remove the "using
dso__data_read_offset" part.
Thanks,
Namhyung
> +
> + buf = malloc(len);
> + if (buf == NULL)
> + goto err;
> +
> + count = dso__data_read_offset(dso, NULL, sym->start, buf, len);
> +
> + line = (u32 *)buf;
> +
> + if ((u64)count != len)
> + goto err;
> +
> + /* add the function address and name */
> + scnprintf(disasm_buf, sizeof(disasm_buf), "%#"PRIx64" <%s>:",
> + start, sym->name);
> +
> + args->offset = -1;
> + args->line = disasm_buf;
> + args->line_nr = 0;
> + args->fileloc = NULL;
> + args->ms.sym = sym;
> +
> + dl = disasm_line__new(args);
> + if (dl == NULL)
> + goto err;
> +
> + annotation_line__add(&dl->al, ¬es->src->source);
> +
> + /* Each raw instruction is 4 byte */
> + count = len/4;
> +
> + for (i = 0, offset = 0; i < count; i++) {
> + args->offset = offset;
> + sprintf(args->line, "%x", line[i]);
> + dl = disasm_line__new(args);
> + if (dl == NULL)
> + goto err;
> +
> + annotation_line__add(&dl->al, ¬es->src->source);
> + offset += 4;
> + }
> +
> + /* It failed in the middle */
> + if (offset != len) {
> + struct list_head *list = ¬es->src->source;
> +
> + /* Discard all lines and fallback to objdump */
> + while (!list_empty(list)) {
> + dl = list_first_entry(list, struct disasm_line,
> al.node);
> +
> + list_del_init(&dl->al.node);
> + disasm_line__free(dl);
> + }
> + count = -1;
> + }
> +
> +out:
> + free(buf);
> + return count < 0 ? count : 0;
> +
> +err:
> + count = -1;
> + goto out;
> +}
> /*
> * Possibly create a new version of line with tabs expanded. Returns the
> * existing or new line, storage is updated if a new line is allocated. If
> @@ -1710,6 +1795,19 @@ int symbol__disassemble(struct symbol *sym, struct
> annotate_args *args)
> strcpy(symfs_filename, tmp);
> }
>
> + /*
> + * For powerpc data type profiling, use the dso__data_read_offset
> + * to read raw instruction directly and interpret the binary code
> + * to understand instructions and register fields. For sort keys as
> + * type and typeoff, disassemble to mnemonic notation is
> + * not required in case of powerpc.
> + */
> + if (arch__is(args->arch, "powerpc")) {
> + err = symbol__disassemble_dso(symfs_filename, sym, args);
> + if (err == 0)
> + goto out_remove_tmp;
> + }
> +
> #ifdef HAVE_LIBCAPSTONE_SUPPORT
> err = symbol__disassemble_capstone(symfs_filename, sym, args);
> if (err == 0)
> --
> 2.43.0
>
