The function spapr_tce_platform_iommu_attach_dev() is missing to call
iommu_group_put() when the domain is already set. This refcount leak
shows up with BUG_ON() during DLPAR remove operation as,
KernelBug: Kernel bug in state 'None': kernel BUG at
arch/powerpc/platforms/pseries/iommu.c:100!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=8192 NUMA pSeries
<snip>
Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00
(NH1060_016) hv:phyp pSeries
NIP: c0000000000ff4d4 LR: c0000000000ff4cc CTR: 0000000000000000
REGS: c0000013aed5f840 TRAP: 0700 Tainted: G I
(6.8.0-rc3-autotest-g99bd3cb0d12e)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 44002402 XER: 20040000
CFAR: c000000000a0d170 IRQMASK: 0
GPR00: c0000000000ff4cc c0000013aed5fae0 c000000001512700 c0000013aa362138
GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000119c8afd0
GPR08: 0000000000000000 c000001284442b00 0000000000000001 0000000000001003
GPR12: 0000000300000000 c0000018ffff2f00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: c0000013aed5fc40 0000000000000002 0000000000000000 c000000002757d90
GPR28: c0000000000ff440 c000000002757cb8 c00000183799c1a0 c0000013aa362b00
NIP [c0000000000ff4d4] iommu_reconfig_notifier+0x94/0x200
LR [c0000000000ff4cc] iommu_reconfig_notifier+0x8c/0x200
Call Trace:
[c0000013aed5fae0] [c0000000000ff4cc] iommu_reconfig_notifier+0x8c/0x200
(unreliable)
[c0000013aed5fb10] [c0000000001a27b0] notifier_call_chain+0xb8/0x19c
[c0000013aed5fb70] [c0000000001a2a78] blocking_notifier_call_chain+0x64/0x98
[c0000013aed5fbb0] [c000000000c4a898] of_reconfig_notify+0x44/0xdc
[c0000013aed5fc20] [c000000000c4add4] of_detach_node+0x78/0xb0
[c0000013aed5fc70] [c0000000000f96a8] ofdt_write.part.0+0x86c/0xbb8
[c0000013aed5fce0] [c00000000069b4bc] proc_reg_write+0xf4/0x150
[c0000013aed5fd10] [c0000000005bfeb4] vfs_write+0xf8/0x488
[c0000013aed5fdc0] [c0000000005c0570] ksys_write+0x84/0x140
[c0000013aed5fe10] [c000000000033358] system_call_exception+0x138/0x330
[c0000013aed5fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
--- interrupt: 3000 at 0x20000433acb4
<snip>
---[ end trace 0000000000000000 ]---
The patch adds the missing iommu_group_put() call.
Fixes: a8ca9fc9134c ("powerpc/iommu: Do not do platform domain attach atctions
after probe")
Signed-off-by: Shivaprasad G Bhat <sb...@linux.ibm.com>
---
arch/powerpc/kernel/iommu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index d71eac3b2887..a9bebfd56b3b 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -1289,8 +1289,10 @@ spapr_tce_platform_iommu_attach_dev(struct iommu_domain
*platform_domain,
struct iommu_table_group *table_group;
/* At first attach the ownership is already set */
- if (!domain)
+ if (!domain) {
+ iommu_group_put(grp);
return 0;
+ }
table_group = iommu_group_get_iommudata(grp);
/*
