Hi,

this is a fix for full duplex transfer mode on the mpc52xx_psc_spi driver.
Details see the patch header. Tested on a mpc5200b board.

Cheers
Luotao fu
-- 
   Dipl.-Ing. Luotao Fu | Phone: +49-5121-206917-3
Pengutronix - Linux Solutions for Science and Industry
Entwicklungszentrum Nord     http://www.pengutronix.de

From: Luotao Fu <[EMAIL PROTECTED]>
Subject: fix block transfer on mpc52xx psc spi

  The block transfer routine in the mpc52xx psc spi driver misinterpret the
  datasheet. According to the processor datasheet the chipselect is held as
  long as the EOF is not written. Theoretically block of any sizes can be
  transferd in this way. The old routine however writes an EOF after every
  word, which has the size of size_of_word. This makes the transfer slow.
  Also fixed some duplicate code.

Signed-off-by: Luotao Fu <[EMAIL PROTECTED]>

---
 drivers/spi/mpc52xx_psc_spi.c |   22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

Index: drivers/spi/mpc52xx_psc_spi.c
===================================================================
--- a/drivers/spi/mpc52xx_psc_spi.c.orig
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -146,7 +146,6 @@ static int mpc52xx_psc_spi_transfer_rxtx
 	unsigned rfalarm;
 	unsigned send_at_once = MPC52xx_PSC_BUFSIZE;
 	unsigned recv_at_once;
-	unsigned bpw = mps->bits_per_word / 8;
 
 	if (!t->tx_buf && !t->rx_buf && t->len)
 		return -EINVAL;
@@ -162,22 +161,15 @@ static int mpc52xx_psc_spi_transfer_rxtx
 		}
 
 		dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once);
-		if (tx_buf) {
-			for (; send_at_once; sb++, send_at_once--) {
-				/* set EOF flag */
-				if (mps->bits_per_word
-						&& (sb + 1) % bpw == 0)
-					out_8(&psc->ircr2, 0x01);
+		for (; send_at_once; sb++, send_at_once--) {
+			/* set EOF flag before the last word is sent */
+			if (send_at_once == 1)
+				out_8(&psc->ircr2, 0x01);
+
+			if (tx_buf)
 				out_8(&psc->mpc52xx_psc_buffer_8, tx_buf[sb]);
-			}
-		} else {
-			for (; send_at_once; sb++, send_at_once--) {
-				/* set EOF flag */
-				if (mps->bits_per_word
-						&& ((sb + 1) % bpw) == 0)
-					out_8(&psc->ircr2, 0x01);
+			else
 				out_8(&psc->mpc52xx_psc_buffer_8, 0);
-			}
 		}
 
 

Attachment: signature.asc
Description: Digital signature

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to