It's not necessary to prefix every command in archhelp with "@" (to
supress echoing the command), because that is done by the top level
Makefile when it evaluates archhelp.
Signed-off-by: Michael Ellerman <m...@ellerman.id.au>
---
arch/powerpc/Makefile | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index dc4cbf0a5ca9..b9bfa9ac3f06 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -349,25 +349,25 @@ PHONY += ppc64_randconfig
-f $(srctree)/Makefile randconfig
define archhelp
- @echo '* zImage - Build default images selected by kernel config'
- @echo ' zImage.* - Compressed kernel image
(arch/$(ARCH)/boot/zImage.*)'
- @echo ' uImage - U-Boot native image format'
- @echo ' cuImage.<dt> - Backwards compatible U-Boot image for older'
- @echo ' versions which do not support device trees'
- @echo ' dtbImage.<dt> - zImage with an embedded device tree blob'
- @echo ' simpleImage.<dt> - Firmware independent image.'
- @echo ' treeImage.<dt> - Support for older IBM 4xx firmware (not U-Boot)'
- @echo ' install - Install kernel using'
- @echo ' (your) ~/bin/$(INSTALLKERNEL) or'
- @echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
- @echo ' install to $$(INSTALL_PATH) and run lilo'
- @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
- @echo ''
- @echo ' Targets with <dt> embed a device tree blob inside the image'
- @echo ' These targets support board with firmware that does not'
- @echo ' support passing a device tree directly. Replace <dt> with the'
- @echo ' name of a dts file from the arch/$(ARCH)/boot/dts/ directory'
- @echo ' (minus the .dts extension).'
+ echo '* zImage - Build default images selected by kernel config'
+ echo ' zImage.* - Compressed kernel image
(arch/$(ARCH)/boot/zImage.*)'
+ echo ' uImage - U-Boot native image format'
+ echo ' cuImage.<dt> - Backwards compatible U-Boot image for older'
+ echo ' versions which do not support device trees'
+ echo ' dtbImage.<dt> - zImage with an embedded device tree blob'
+ echo ' simpleImage.<dt> - Firmware independent image.'
+ echo ' treeImage.<dt> - Support for older IBM 4xx firmware (not U-Boot)'
+ echo ' install - Install kernel using'
+ echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
+ echo ' install to $$(INSTALL_PATH) and run lilo'
+ echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
+ echo ''
+ echo ' Targets with <dt> embed a device tree blob inside the image'
+ echo ' These targets support board with firmware that does not'
+ echo ' support passing a device tree directly. Replace <dt> with the'
+ echo ' name of a dts file from the arch/$(ARCH)/boot/dts/ directory'
+ echo ' (minus the .dts extension).'
endef
PHONY += install
--
2.39.2
