On 1/25/23 18:48, Shawn Guo wrote:
> On Thu, Dec 29, 2022 at 07:01:37PM -0500, Sean Anderson wrote:
>> This adds bindings for the SerDes devices. They are disabled by default
>> to prevent any breakage on existing boards.
>>
>> Signed-off-by: Sean Anderson <sean.ander...@seco.com>
>> ---
>>
>> (no changes since v4)
>>
>> Changes in v4:
>> - Convert to new bindings
>>
>> Changes in v3:
>> - New
>>
>> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
>> b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
>> index 260d045dbd9a..ecf9d830e36f 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
>> @@ -238,6 +238,24 @@ reset: syscon@1e60000 {
>> reg = <0x0 0x1e60000 0x0 0x10000>;
>> };
>>
>> + serdes1: serdes@1ea0000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #clock-cells = <1>;
>> + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g";
>> + reg = <0x0 0x1ea0000 0x0 0x2000>;
>
> Can we start the properties with compatible (and reg) like most of other
> device nodes?
Sure.
--Sean
>> + status = "disabled";
>> + };
>> +
>> + serdes2: serdes@1eb0000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #clock-cells = <1>;
>> + compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g";
>> + reg = <0x0 0x1eb0000 0x0 0x2000>;
>> + status = "disabled";
>> + };
>> +
>> isc: syscon@1f70000 {
>> compatible = "fsl,ls1088a-isc", "syscon";
>> reg = <0x0 0x1f70000 0x0 0x10000>;
>> --
>> 2.35.1.1320.gc452695387.dirty
>>
