Benjamin Herrenschmidt wrote:
On Tue, 2008-07-08 at 08:03 -0700, Grant Erickson wrote:
This patch adds support to the RGMII handler in the EMAC driver for
the MII PHY mode such that device tree entries of the form `phy-mode = "mii";'
are recognized and handled appropriately.
While logically, in software, "gmii" and "mii" modes are the same,
they are wired differently, so it makes sense to allow DTS authors to
specify each explicitly.
Signed-off-by: Grant Erickson <[EMAIL PROTECTED]>
Acked-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
ACK
Jeff, I'd like to apply that (and other EMAC patches for 2.6.27, do you
have anything else pending ?) via my tree provided you give me your ack.
The reason is that the multicast fix one is going that way as it touches
other arch files, and subsequent ones are now likely to conflict.
Let me know if that's ok with you in which case I'll stick your ack in
there.
Ok w/ me!
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
