Scott Wood wrote:
Paul Gortmaker wrote:
Well, for the mpc7448hpc2, I can say for sure that there are
chosen-duplicating versions of u-boot 1.3.1 in use -- since
there wasn't a prebuilt, validated image newer than 1.1.3(?)
available anywhere back some 6 months ago, I'd built 1.3.1
and made it available with our 2.6.21 kernel.
OK, if that version's in widespread use it probably makes sense to
remove the chosen node.
Sounds good - thanks.
If all the other boards run cuboot without console output,
They don't *all* run without output -- see the 8xx, 82xx, and 4xx boards.
Yep, saw those when grepping around. My "all" was implicitly still
referring to the newer 83xx/85xx/(86xx) reference boards, and
whether it made sense to be adding chosen nodes to those so the
cuImage had console output too -- if folks thought that was a better
route, then I could see leaving the 7448 as-is, adding the nodes
to the other boards, and just dealing with educating folks on the
chosen-duplicating version issue as it comes up.
Paul.
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
