"make dtbs_check":
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70:
$nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema:
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70:
Unevaluated properties are not allowed ('#address-cells', '#size-cells',
'i2c@0', 'i2c@1', 'i2c@2' were unexpected)
From schema:
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 2 +-
arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index ca1aeb69a8929931..c864df9ec84d1b6f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -135,7 +135,7 @@ &cp0_i2c1 {
pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
- i2c-switch@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index eb04735039362373..42a60f3dd5d142fc 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -285,7 +285,7 @@ &cp0_i2c1 {
pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
- i2c-switch@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
--
2.25.1
