"make dtbs_check":
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: $nodename:0:
'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema:
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: Unevaluated properties are
not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2',
'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected)
From schema:
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
Fix this by renaming the PCA9547 node to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
---
arch/arm/boot/dts/imx53-ppd.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index 37d0cffea99c56ec..70c4a4852256c4ef 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -488,7 +488,7 @@ &i2c1 {
scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
status = "okay";
- i2c-switch@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9547";
#address-cells = <1>;
#size-cells = <0>;
--
2.25.1
