David Gibson schrieb:
> On Mon, Jul 07, 2008 at 10:14:29AM +0200, Andre Schwarz wrote:
>
>> The mvBlueCOUGAR-P is a MPC5200B based camera system with Intel Gigabit
>> ethernet
>> controller (using e1000). It's just another MPC5200_simple board.
>>
>
> [snip]
>
>> + [EMAIL PROTECTED] { // General Purpose Timer
>> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
>> + reg = <0x600 0x10>;
>> + interrupts = <1 9 0>;
>> + interrupt-parent = <&mpc5200_pic>;
>> + fsl,has-wdt;
>> + };
>> +
>> + [EMAIL PROTECTED] { // General Purpose Timer
>> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
>> + cell-index = <1>;
>>
>
> What shared resource is this cell-index value used to index?
>
> Also why does it not appear on the [EMAIL PROTECTED] but does on all the
> others.
>
>
Sorry - it's a copy paste problem. At first I only used timer0, i.e.
this is the original entry.
After Grant wanting me to have a look at the lite5200b.dts I copied over
the rest of the dts nodes I also have on my board. On lite5200b.dts the
cell-index is defined.
If this is incorrect I'll remove it.
Is cell-index inappropriate for the timer node ?
regards,
Andre
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht:
Amtsgericht Stuttgart, HRB 271090
Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
