kexec-tools adds  crash, rtas, and tce memory regions as linux,usable-memory 
properties in device-tree.  Following changes are made in the kernel to 
recognize these special properties in case of 
ibm,dynamic-reconfiguration-memory node of device-tree.

Signed-off-by: Chandru Siddalingappa <[EMAIL PROTECTED]>
---

diff -Naurp linux-2.6.26-rc9-orig/arch/powerpc/kernel/prom.c 
linux-2.6.26-rc9/arch/powerpc/kernel/prom.c
--- linux-2.6.26-rc9-orig/arch/powerpc/kernel/prom.c    2008-07-06 
04:23:22.000000000 +0530
+++ linux-2.6.26-rc9/arch/powerpc/kernel/prom.c 2008-07-07 17:23:58.000000000 
+0530
@@ -884,9 +884,10 @@ static u64 __init dt_mem_next_cell(int s
  */
 static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 {
-       cell_t *dm, *ls;
+       cell_t *dm, *ls, *endp, *usm;
        unsigned long l, n, flags;
        u64 base, size, lmb_size;
+       char buf[32], t[8];
 
        ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
        if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
@@ -917,7 +918,33 @@ static int __init early_init_dt_scan_drc
                        if ((base + size) > 0x80000000ul)
                                size = 0x80000000ul - base;
                }
-               lmb_add(base, size);
+               strcpy(buf, "linux,usable-memory");
+               sprintf(t, "%d", (int)n);
+               strcat(buf, t);
+               usm = (cell_t *)of_get_flat_dt_prop(node,
+                                                (const char *)buf, &l);
+               if (usm != NULL) {
+                       endp = usm + (l / sizeof(cell_t));
+                       while ((endp - usm) >= (dt_root_addr_cells +
+                                                dt_root_size_cells)) {
+                               base = dt_mem_next_cell(dt_root_addr_cells,
+                                                                &usm);
+                               size = dt_mem_next_cell(dt_root_size_cells,
+                                                                &usm);
+                               if (size == 0)
+                                       continue;
+                               if (iommu_is_off) {
+                                       if ((base + size) > 0x80000000ul)
+                                               size = 0x80000000ul - base;
+                               }
+                               lmb_add(base, size);
+                       }
+
+                       /* Continue with next lmb entry */
+                       continue;
+               } else {
+                       lmb_add(base, size);
+               }
        }
        lmb_dump_all();
        return 0;
diff -Naurp linux-2.6.26-rc9-orig/arch/powerpc/mm/numa.c 
linux-2.6.26-rc9/arch/powerpc/mm/numa.c
--- linux-2.6.26-rc9-orig/arch/powerpc/mm/numa.c        2008-07-06 
04:23:22.000000000 
+0530
+++ linux-2.6.26-rc9/arch/powerpc/mm/numa.c     2008-07-07 17:50:35.000000000 
+0530
@@ -349,18 +349,33 @@ static unsigned long __init numa_enforce
        return lmb_end_of_DRAM() - start;
 }
 
+static void set_nodeinfo(int nid, unsigned long start, unsigned long size)
+{
+       fake_numa_create_new_node(((start + size) >> PAGE_SHIFT),
+                                       &nid);
+       node_set_online(nid);
+
+       size = numa_enforce_memory_limit(start, size);
+       if (!size)
+               return;
+       add_active_range(nid, start >> PAGE_SHIFT,
+                       (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+       return;
+}
+
 /*
  * Extract NUMA information from the ibm,dynamic-reconfiguration-memory
  * node.  This assumes n_mem_{addr,size}_cells have been set.
  */
 static void __init parse_drconf_memory(struct device_node *memory)
 {
-       const unsigned int *lm, *dm, *aa;
+       const unsigned int *lm, *dm, *aa, *usm;
        unsigned int ls, ld, la;
        unsigned int n, aam, aalen;
        unsigned long lmb_size, size, start;
        int nid, default_nid = 0;
-       unsigned int ai, flags;
+       unsigned int ai, flags, len, ranges;
+       char buf[32], t[8];
 
        lm = of_get_property(memory, "ibm,lmb-size", &ls);
        dm = of_get_property(memory, "ibm,dynamic-memory", &ld);
@@ -396,16 +411,27 @@ static void __init parse_drconf_memory(s
                                nid = default_nid;
                }
 
-               fake_numa_create_new_node(((start + lmb_size) >> PAGE_SHIFT),
-                                               &nid);
-               node_set_online(nid);
+               strcpy(buf, "linux,usable-memory");
+               sprintf(t, "%d", (int)n);
+               strcat(buf, t);
+               usm = of_get_property(memory, (const char *)buf, &len);
+               if (usm != NULL) {
+                       ranges = (len >> 2) / (n_mem_addr_cells +
+                                                n_mem_size_cells);
+
+dr_new_range:          start = read_n_cells(n_mem_addr_cells, &usm);
+                       size = read_n_cells(n_mem_size_cells, &usm);
+                       if (size == 0)
+                               continue;
 
-               size = numa_enforce_memory_limit(start, lmb_size);
-               if (!size)
-                       continue;
+                       set_nodeinfo(nid, start, size);
+                       if (--ranges)
+                               goto dr_new_range;
 
-               add_active_range(nid, start >> PAGE_SHIFT,
-                                (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+                       continue;
+               } else {
+                       set_nodeinfo(nid, start, lmb_size);
+               }
        }
 }
 
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to