Re: [Cbe-oss-dev] [patch 02/02] powerpc/cell: add support for power button of future IBM cell blades

[Christian Krafft]

From: Christian Krafft <[EMAIL PROTECTED]>

This patch adds support for the power button on future IBM cell blades.
It actually doesn't shut down the machine. Instead it exposes an
input device /dev/input/event0 to userspace which sends KEY_POWER
if power button has been pressed.
haldaemon actually recognizes the button, so a plattform independent acpid
replacement should handle it correctly.

Signed-off-by: Christian Krafft <[EMAIL PROTECTED]>

Index: linux.git/arch/powerpc/platforms/cell/Kconfig
===================================================================
--- linux.git.orig/arch/powerpc/platforms/cell/Kconfig
+++ linux.git/arch/powerpc/platforms/cell/Kconfig
@@ -87,9 +87,12 @@ config PPC_IBM_CELL_BLADE_BUTTONS
        bool "IBM Cell Blade Buttons"
        depends on CBE_RAS && PPC_IBM_CELL_BLADE
        default y
+       select INPUT
+       select INPUT_EVDEV
        help
          Support Buttons on IBM Cell blades. This adds a method to
-         trigger system reset via front panel pinhole button.
+         trigger system reset via front panel pinhole button and
+         an input device for the power button.
 
 config CBE_THERM
        tristate "CBE thermal support"
Index: linux.git/arch/powerpc/platforms/cell/ras.c
===================================================================
--- linux.git.orig/arch/powerpc/platforms/cell/ras.c
+++ linux.git/arch/powerpc/platforms/cell/ras.c
@@ -14,6 +14,11 @@
 #include <linux/smp.h>
 #include <linux/reboot.h>
 
+#ifdef CONFIG_PPC_IBM_CELL_BLADE_BUTTONS
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#endif /* CONFIG_PPC_IBM_CELL_BLADE_BUTTONS */
+
 #include <asm/reg.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -232,31 +237,76 @@ static struct notifier_block cbe_ptcal_r
 
 #ifdef CONFIG_PPC_IBM_CELL_BLADE_BUTTONS
 static int sysreset_hack;
+static struct input_dev *button_dev;
+static struct platform_device *button_pdev;
 
 static int __init cbe_sysreset_init(void)
 {
+       int ret = 0;
+       struct input_dev *dev;
        struct cbe_pmd_regs __iomem *regs;
 
        sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
        if (!sysreset_hack)
-               return 0;
+               goto out;
 
        regs = cbe_get_cpu_pmd_regs(0);
        if (!regs)
-               return 0;
+               goto out;
 
        /* Enable JTAG system-reset hack */
        out_be32(&regs->fir_mode_reg,
                in_be32(&regs->fir_mode_reg) |
                CBE_PMD_FIR_MODE_M8);
 
-       return 0;
+       dev = input_allocate_device();
+       if (!dev) {
+               ret = -ENOMEM;
+               printk(KERN_ERR "%s: Not enough memory\n", __func__);
+               goto out;
+       }
+
+       set_bit(EV_KEY, dev->evbit);
+       set_bit(KEY_POWER, dev->keybit);
+
+       dev->name = "Power Button";
+       dev->id.bustype = BUS_HOST;
+
+       /* this makes the button look like an acpi power button
+        * no clue whether anyone relies on that though */
+       dev->id.product = 0x02;
+       dev->phys = "LNXPWRBN/button/input0";
+
+       button_pdev = platform_device_register_simple("power_button", 0, NULL, 
0);
+       if (IS_ERR(button_pdev)) {
+               ret = PTR_ERR(button_pdev);
+               goto out_free_input;
+       }
+
+       dev->dev.parent = &button_pdev->dev;
+       ret = input_register_device(dev);
+
+       if (ret) {
+               printk(KERN_ERR "%s: Failed to register device\n", __func__);
+               goto out_free_pdev;
+       }
+
+       button_dev = dev;
+       goto out;
+
+out_free_pdev:
+       platform_device_unregister(button_pdev);
+out_free_input:
+       input_free_device(dev);
+out:
+       return ret;
 }
 device_initcall(cbe_sysreset_init);
 
 int cbe_sysreset_hack(void)
 {
        struct cbe_pmd_regs __iomem *regs;
+       u64 status;
 
        /*
         * The BMC can inject user triggered system reset exceptions,
@@ -267,10 +317,20 @@ int cbe_sysreset_hack(void)
                regs = cbe_get_cpu_pmd_regs(0);
                if (!regs)
                        return 0;
-               if (in_be64(&regs->ras_esc_0) & 0x0000ffff) {
+               status = in_be64(&regs->ras_esc_0);
+               if (status & 0x0000ffff) {
                        out_be64(&regs->ras_esc_0, 0);
                        return 0;
                }
+               if (status & 0x00010000) {
+                       out_be64(&regs->ras_esc_0, 0);
+                       if (!button_dev)
+                               return 0;
+                       input_report_key(button_dev, KEY_POWER, 1);
+                       input_sync(button_dev);
+                       input_report_key(button_dev, KEY_POWER, 0);
+                       input_sync(button_dev);
+               }
        }
        return 1;
 }

-- 
Mit freundlichen Gruessen,
kind regards,

Christian Krafft
Linux Kernel Development
IBM Systems & Technology Group
Phone: +49-07031-16-2032

IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Martin Jetter
Geschaetsfuehung:               Herbert Kircher
Sitz der Gesellschaft:          Boelingen
Registergericht:                Amtsgericht Stuttgart, HRB 243294
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev