On Wed, 2008-07-02 at 17:53 -0500, Nate Case wrote: > I'm looking at gfar_configure_serdes() and I'm at a loss as to why > this > is always called when the MAC is in SGMII mode. It looks like it > assumes the use of TBI for some reason. On my board it's just a > regular > SGMII interface to a bcm5482 PHY in SGMII mode, so there is no TBI > involved. > > I'm guessing this is a case of the driver making incorrect assumptions > based on the existing Freescale boards. Or am I missing something > here?
Answering my own question: I see now that TBI is used internally on the chip for the SerDes interface which implements SGMII.. so maybe there's no problem with what the driver is doing after all. -- Nate Case <[EMAIL PROTECTED]> _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
