This merges and cleans up some of the ugly copy/to from user code
which is required for the new fpr and vsx layout in the thread_struct.
Also fixes some hard coded buffer sizes and removes a redundant
fpr_flush_to_thread.
Signed-off-by: Michael Neuling <[EMAIL PROTECTED]>
---
arch/powerpc/kernel/signal.h | 10 +++
arch/powerpc/kernel/signal_32.c | 40 ++------------
arch/powerpc/kernel/signal_64.c | 112 ++++++++++++++++++++++++++++------------
3 files changed, 96 insertions(+), 66 deletions(-)
Index: linux-2.6-ozlabs/arch/powerpc/kernel/signal.h
===================================================================
--- linux-2.6-ozlabs.orig/arch/powerpc/kernel/signal.h
+++ linux-2.6-ozlabs/arch/powerpc/kernel/signal.h
@@ -24,6 +24,16 @@ extern int handle_rt_signal32(unsigned l
siginfo_t *info, sigset_t *oldset,
struct pt_regs *regs);
+extern unsigned long copy_fpr_to_user(void __user *to,
+ struct task_struct *task);
+extern unsigned long copy_fpr_from_user(struct task_struct *task,
+ void __user *from);
+#ifdef CONFIG_VSX
+extern unsigned long copy_vsx_to_user(void __user *to,
+ struct task_struct *task);
+extern unsigned long copy_vsx_from_user(struct task_struct *task,
+ void __user *from);
+#endif
#ifdef CONFIG_PPC64
Index: linux-2.6-ozlabs/arch/powerpc/kernel/signal_32.c
===================================================================
--- linux-2.6-ozlabs.orig/arch/powerpc/kernel/signal_32.c
+++ linux-2.6-ozlabs/arch/powerpc/kernel/signal_32.c
@@ -337,10 +337,6 @@ static int save_user_regs(struct pt_regs
int sigret)
{
unsigned long msr = regs->msr;
-#ifdef CONFIG_VSX
- double buf[32];
- int i;
-#endif
/* Make sure floating point registers are stored in regs */
flush_fp_to_thread(current);
@@ -370,14 +366,9 @@ static int save_user_regs(struct pt_regs
if (__put_user(current->thread.vrsave, (u32 __user
*)&frame->mc_vregs[32]))
return 1;
#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
- /* save FPR copy to local buffer then write to the thread_struct */
- flush_fp_to_thread(current);
- for (i = 0; i < 32 ; i++)
- buf[i] = current->thread.TS_FPR(i);
- memcpy(&buf[i], ¤t->thread.fpscr, sizeof(double));
- if (__copy_to_user(&frame->mc_fregs, buf, ELF_NFPREG * sizeof(double)))
+ if (copy_fpr_to_user(&frame->mc_fregs, current))
return 1;
+#ifdef CONFIG_VSX
/*
* Copy VSR 0-31 upper half from thread_struct to local
* buffer, then write that to userspace. Also set MSR_VSX in
@@ -386,18 +377,10 @@ static int save_user_regs(struct pt_regs
*/
if (current->thread.used_vsr) {
flush_vsx_to_thread(current);
- for (i = 0; i < 32 ; i++)
- buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
- if (__copy_to_user(&frame->mc_vsregs, buf,
- ELF_NVSRHALFREG * sizeof(double)))
+ if (copy_vsx_to_user(&frame->mc_vsregs, current))
return 1;
msr |= MSR_VSX;
}
-#else
- /* save floating-point registers */
- if (__copy_to_user(&frame->mc_fregs, current->thread.fpr,
- ELF_NFPREG * sizeof(double)))
- return 1;
#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
/* save spe registers */
@@ -442,7 +425,6 @@ static long restore_user_regs(struct pt_
unsigned int save_r2 = 0;
unsigned long msr;
#ifdef CONFIG_VSX
- double buf[32];
int i;
#endif
@@ -490,13 +472,10 @@ static long restore_user_regs(struct pt_
if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
return 1;
#endif /* CONFIG_ALTIVEC */
+ if (copy_fpr_from_user(current, &sr->mc_fregs))
+ return 1;
#ifdef CONFIG_VSX
- if (__copy_from_user(buf, &sr->mc_fregs,sizeof(sr->mc_fregs)))
- return 1;
- for (i = 0; i < 32 ; i++)
- current->thread.TS_FPR(i) = buf[i];
- memcpy(¤t->thread.fpscr, &buf[i], sizeof(double));
/*
* Force the process to reload the VSX registers from
* current->thread when it next does VSX instruction.
@@ -507,18 +486,11 @@ static long restore_user_regs(struct pt_
* Restore altivec registers from the stack to a local
* buffer, then write this out to the thread_struct
*/
- if (__copy_from_user(buf, &sr->mc_vsregs,
- sizeof(sr->mc_vsregs)))
+ if (copy_vsx_from_user(current, &sr->mc_vsregs))
return 1;
- for (i = 0; i < 32 ; i++)
- current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
} else if (current->thread.used_vsr)
for (i = 0; i < 32 ; i++)
current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
-#else
- if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
- sizeof(sr->mc_fregs)))
- return 1;
#endif /* CONFIG_VSX */
/*
* force the process to reload the FP registers from
Index: linux-2.6-ozlabs/arch/powerpc/kernel/signal_64.c
===================================================================
--- linux-2.6-ozlabs.orig/arch/powerpc/kernel/signal_64.c
+++ linux-2.6-ozlabs/arch/powerpc/kernel/signal_64.c
@@ -69,6 +69,75 @@ static const char fmt32[] = KERN_INFO \
static const char fmt64[] = KERN_INFO \
"%s[%d]: bad frame in %s: %016lx nip %016lx lr %016lx\n";
+#ifdef CONFIG_VSX
+unsigned long copy_fpr_to_user(void __user *to,
+ struct task_struct *task)
+{
+ double buf[ELF_NFPREG];
+ int i;
+
+ /* save FPR copy to local buffer then write to the thread_struct */
+ for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+ buf[i] = task->thread.TS_FPR(i);
+ memcpy(&buf[i], &task->thread.fpscr, sizeof(double));
+ return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
+}
+
+unsigned long copy_fpr_from_user(struct task_struct *task,
+ void __user *from)
+{
+ double buf[ELF_NFPREG];
+ int i;
+
+ if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
+ return 1;
+ for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+ task->thread.TS_FPR(i) = buf[i];
+ memcpy(&task->thread.fpscr, &buf[i], sizeof(double));
+
+ return 0;
+}
+
+unsigned long copy_vsx_to_user(void __user *to,
+ struct task_struct *task)
+{
+ double buf[ELF_NVSRHALFREG];
+ int i;
+
+ /* save FPR copy to local buffer then write to the thread_struct */
+ for (i = 0; i < ELF_NVSRHALFREG; i++)
+ buf[i] = task->thread.fpr[i][TS_VSRLOWOFFSET];
+ return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
+}
+
+unsigned long copy_vsx_from_user(struct task_struct *task,
+ void __user *from)
+{
+ double buf[ELF_NVSRHALFREG];
+ int i;
+
+ if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
+ return 1;
+ for (i = 0; i < ELF_NVSRHALFREG ; i++)
+ task->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+ return 0;
+}
+#else
+inline unsigned long copy_fpr_to_user(void __user *to,
+ struct task_struct *task)
+{
+ return __copy_to_user(to, task->thread.fpr,
+ ELF_NFPREG * sizeof(double));
+}
+
+inline unsigned long copy_fpr_from_user(struct task_struct *task,
+ void __user *from)
+{
+ return __copy_from_user(task->thread.fpr, from,
+ ELF_NFPREG * sizeof(double));
+}
+#endif
+
/*
* Set up the sigcontext for the signal frame.
*/
@@ -89,10 +158,6 @@ static long setup_sigcontext(struct sigc
#endif
unsigned long msr = regs->msr;
long err = 0;
-#ifdef CONFIG_VSX
- double buf[FP_REGS_SIZE];
- int i;
-#endif
flush_fp_to_thread(current);
@@ -117,12 +182,9 @@ static long setup_sigcontext(struct sigc
err |= __put_user(0, &sc->v_regs);
#endif /* CONFIG_ALTIVEC */
flush_fp_to_thread(current);
+ /* copy fpr regs and fpscr */
+ err |= copy_fpr_to_user(&sc->fp_regs, current);
#ifdef CONFIG_VSX
- /* Copy FP to local buffer then write that out */
- for (i = 0; i < 32 ; i++)
- buf[i] = current->thread.TS_FPR(i);
- memcpy(&buf[i], ¤t->thread.fpscr, sizeof(double));
- err |= __copy_to_user(&sc->fp_regs, buf, FP_REGS_SIZE);
/*
* Copy VSX low doubleword to local buffer for formatting,
* then out to userspace. Update v_regs to point after the
@@ -131,17 +193,12 @@ static long setup_sigcontext(struct sigc
if (current->thread.used_vsr) {
flush_vsx_to_thread(current);
v_regs += ELF_NVRREG;
- for (i = 0; i < 32 ; i++)
- buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
- err |= __copy_to_user(v_regs, buf, 32 * sizeof(double));
+ err |= copy_vsx_to_user(v_regs, current);
/* set MSR_VSX in the MSR value in the frame to
* indicate that sc->vs_reg) contains valid data.
*/
msr |= MSR_VSX;
}
-#else /* CONFIG_VSX */
- /* copy fpr regs and fpscr */
- err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE);
#endif /* CONFIG_VSX */
err |= __put_user(&sc->gp_regs, &sc->regs);
WARN_ON(!FULL_REGS(regs));
@@ -165,13 +222,12 @@ static long restore_sigcontext(struct pt
#ifdef CONFIG_ALTIVEC
elf_vrreg_t __user *v_regs;
#endif
-#ifdef CONFIG_VSX
- double buf[FP_REGS_SIZE];
- int i;
-#endif
unsigned long err = 0;
unsigned long save_r13 = 0;
unsigned long msr;
+#ifdef CONFIG_VSX
+ int i;
+#endif
/* If this is not a signal return, we preserve the TLS in r13 */
if (!sig)
@@ -234,15 +290,9 @@ static long restore_sigcontext(struct pt
else
current->thread.vrsave = 0;
#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
/* restore floating point */
- err |= __copy_from_user(buf, &sc->fp_regs, FP_REGS_SIZE);
- if (err)
- return err;
- for (i = 0; i < 32 ; i++)
- current->thread.TS_FPR(i) = buf[i];
- memcpy(¤t->thread.fpscr, &buf[i], sizeof(double));
-
+ err |= copy_fpr_from_user(current, &sc->fp_regs);
+#ifdef CONFIG_VSX
/*
* Get additional VSX data. Update v_regs to point after the
* VMX data. Copy VSX low doubleword from userspace to local
@@ -250,14 +300,12 @@ static long restore_sigcontext(struct pt
*/
v_regs += ELF_NVRREG;
if ((msr & MSR_VSX) != 0)
- err |= __copy_from_user(buf, v_regs, 32 * sizeof(double));
+ err |= copy_vsx_from_user(current, v_regs);
else
- memset(buf, 0, 32 * sizeof(double));
+ for (i = 0; i < 32 ; i++)
+ current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
- for (i = 0; i < 32 ; i++)
- current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
#else
- err |= __copy_from_user(¤t->thread.fpr, &sc->fp_regs,
FP_REGS_SIZE);
#endif
return err;
}
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
