On 10/6/21 11:02 PM, Paul A. Clarke wrote:
> Kajol,
>
> On Wed, Oct 06, 2021 at 01:01:19PM +0530, Kajol Jain wrote:
>> Add pmu metric json file for power10 platform.
>
> Thanks for producing this! A few minor corrections, plus a number of
> stylistic comments below...
Hi Paul,
I will make mentioned nit changes and send a v2.
Thanks,
Kajol Jain
>
>> Signed-off-by: Kajol Jain <kj...@linux.ibm.com>
>> ---
>> .../arch/powerpc/power10/metrics.json | 772 ++++++++++++++++++
>> 1 file changed, 772 insertions(+)
>> create mode 100644 tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>>
>> diff --git a/tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>> b/tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>> new file mode 100644
>> index 000000000000..028c9777a516
>> --- /dev/null
>> +++ b/tools/perf/pmu-events/arch/powerpc/power10/metrics.json
>> @@ -0,0 +1,772 @@
>> +[
>> + {
>> + "BriefDescription": "Percentage of cycles that are run cycles",
>> + "MetricExpr": "PM_RUN_CYC / PM_CYC * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "RUN_CYCLES_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per completed instruction",
>> + "MetricExpr": "PM_CYC / PM_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "CYCLES_PER_INSTRUCTION"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled for any reason",
>> + "MetricExpr": "PM_DISP_STALL_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled because there was a flush",
>> + "MetricExpr": "PM_DISP_STALL_FLUSH / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_FLUSH_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled because the MMU was handling a translation miss",
>> + "MetricExpr": "PM_DISP_STALL_TRANSLATION / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_TRANSLATION_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled waiting to resolve an instruction ERAT miss",
>> + "MetricExpr": "PM_DISP_STALL_IERAT_ONLY_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IERAT_ONLY_MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled waiting to resolve an instruction TLB miss",
>> + "MetricExpr": "PM_DISP_STALL_ITLB_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_ITLB_MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled due to an icache miss",
>> + "MetricExpr": "PM_DISP_STALL_IC_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IC_MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled while the instruction was fetched form the local L2",
>
> s/form/from/
>
>> + "MetricExpr": "PM_DISP_STALL_IC_L2 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IC_L2_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled while the instruction was fetched form the local L3",
>
> s/form/from/
>
>> + "MetricExpr": "PM_DISP_STALL_IC_L3 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IC_L3_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled while the instruction was fetched from any source beyond the
>> local L3",
>> + "MetricExpr": "PM_DISP_STALL_IC_L3MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_IC_L3MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled due to an icache miss after a branch mispredict",
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_ICMISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_ICMISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled while instruction was fetched from the local L2 after suffering
>> a branch mispredict",
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L2 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_IC_L2_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled while instruction was fetched from the local L3 after suffering
>> a branch mispredict",
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_IC_L3_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled while instruction was fetched from any source beyond the local
>> L3 after suffering a branch mispredict",
>
> extra space after "beyond"
>
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED_IC_L3MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_IC_L3MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled due to a branch mispredict",
>> + "MetricExpr": "PM_DISP_STALL_BR_MPRED / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_BR_MPRED_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction was held at dispatch for any reason",
>
> s/ntc/NTC/ or "next-to-complete"
> I do see uses of "NTC" below.
> Same comment for other instances of "ntc", below...
>
>> + "MetricExpr": "PM_DISP_STALL_HELD_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction was held at dispatch because of a synchronizing instruction that
>> requires the ICT to be empty before dispatch",
>> + "MetricExpr": "PM_DISP_STALL_HELD_SYNC_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISP_HELD_STALL_SYNC_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction was held at dispatch while waiting on the scoreboard",
>> + "MetricExpr": "PM_DISP_STALL_HELD_SCOREBOARD_CYC /
>> PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISP_HELD_STALL_SCOREBOARD_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction was held at dispatch due to issue q full",
>
> s/q/queue/
>
>> + "MetricExpr": "PM_DISP_STALL_HELD_ISSQ_FULL_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISP_HELD_STALL_ISSQ_FULL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction was held at dispatch because the mapper/SRB was full",
>> + "MetricExpr": "PM_DISP_STALL_HELD_RENAME_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_RENAME_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction was held at dispatch because the STF mapper/SRB was full",
>> + "MetricExpr": "PM_DISP_STALL_HELD_STF_MAPPER_CYC /
>> PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_STF_MAPPER_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction was held at dispatch because the XVFC mapper/SRB was full",
>> + "MetricExpr": "PM_DISP_STALL_HELD_XVFC_MAPPER_CYC /
>> PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_XVFC_MAPPER_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction was held at dispatch for any other reason",
>> + "MetricExpr": "PM_DISP_STALL_HELD_OTHER_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_OTHER_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction has been dispatched but not issued for any reason",
>> + "MetricExpr": "PM_ISSUE_STALL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "ISSUE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting to be finished in one of the execution units",
>> + "MetricExpr": "PM_EXEC_STALL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "EXECUTION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction spent executing
>> an NTC instruction that gets flushed some time after dispatch",
>> + "MetricExpr": "PM_EXEC_STALL_NTC_FLUSH / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "NTC_FLUSH_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the
>> instruction finishes at dispatch",
>
> I'm not sure what that means.
>
>> + "MetricExpr": "PM_EXEC_STALL_FIN_AT_DISP / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "FIN_AT_DISP_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is executing in the branch unit",
>> + "MetricExpr": "PM_EXEC_STALL_BRU / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "BRU_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is a simple fixed point instr that is executing in the lsu unit",
>
> s/instr/instruction/
> s/lsu unit/LSU/
>
>> + "MetricExpr": "PM_EXEC_STALL_SIMPLE_FX / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "SIMPLE_FX_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is executing in the vsu unit",
>
> s/vsu unit/VSU/
>
>> + "MetricExpr": "PM_EXEC_STALL_VSU / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "VSU_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting to be finished in one of the execution units",
>> + "MetricExpr": "PM_EXEC_STALL_TRANSLATION / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "TRANSLATION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is a load or store that suffered a translation miss",
>> + "MetricExpr": "PM_EXEC_STALL_DERAT_ONLY_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DERAT_ONLY_MISS_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is recovering from a TLB miss",
>> + "MetricExpr": "PM_EXEC_STALL_DERAT_DTLB_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DERAT_DTLB_MISS_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is executing in the lsu unit",
>
> s/lsu unit/LSU/
>
>> + "MetricExpr": "PM_EXEC_STALL_LSU / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "LSU_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is a load that is executing in the lsu unit",
>
> s/lsu unit/LSU/
>
>> + "MetricExpr": "PM_EXEC_STALL_LOAD / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "LOAD_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting for a load miss to resolve from either the local L2
>> or local L3",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L2L3_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting for a load miss to resolve from either the local L2
>> or local L3, with an RC dispatch conflict",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_CONFLICT /
>> PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L2L3_CONFLICT_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting for a load miss to resolve from either the local L2
>> or local L3, without an RC dispatch conflict",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L2L3_NOCONFLICT /
>> PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L2L3_NOCONFLICT_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting for a load miss to resolve from a source beyond the
>> local L2 and local L3",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L3MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L3MISS_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting for a load miss to resolve from a neighbor chiplet's
>> L2 or L3 in the same chip",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_L21_L31 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_L21_L31_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting for a load miss to resolve from local memory, L4 or
>> OpenCapp chip",
>
> Most descriptions put L4 before memory.
> (My preference is to use an "Oxford comma", as in "memory, L4, or ..."
> (comma after "L4"), but acknowledge there are those who prefer otherwise.)
>
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_LMEM / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_LMEM_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting for a load miss to resolve from a remote chip (cache,
>> L4, memory or CAPP) in the same group",
>
> Is there a distinction between "OpenCapp" and "CAPP"? If not, pick one
> throughout.
> Is this supposed to be "OpenCAPI"?
>
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_CHIP / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_OFF_CHIP_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is waiting for a load miss to resolve from a distant chip
>> (cache, L4, memory or CAPP chip)",
>> + "MetricExpr": "PM_EXEC_STALL_DMISS_OFF_NODE / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DMISS_OFF_NODE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is executing a TLBIEL instruction",
>> + "MetricExpr": "PM_EXEC_STALL_TLBIEL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "TLBIEL_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is finishing a load after its data has been reloaded from a data
>> source beyond the local L1, OR when the LSU is processing an L1-hit, OR when
>> the NTF instruction merged with another load in the LMQ",
>> + "MetricExpr": "PM_EXEC_STALL_LOAD_FINISH / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "LOAD_FINISH_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is a store that is executing in the lsu unit",
>
> s/lsu unit/LSU/
>
>> + "MetricExpr": "PM_EXEC_STALL_STORE / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "STORE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is in the store unit outside of handling store misses or other
>> special store operations",
>
> s/store unit/LSU/ ?
>
>> + "MetricExpr": "PM_EXEC_STALL_STORE_PIPE / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "STORE_PIPE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is a store whose cache line was not resident in the L1 and had
>> to wait for allocation of the missing line into the L1",
>> + "MetricExpr": "PM_EXEC_STALL_STORE_MISS / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "STORE_MISS_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is a TLBIE instruction waiting for a response from the L2",
>> + "MetricExpr": "PM_EXEC_STALL_TLBIE / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "TLBIE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is executing a PTESYNC instruction",
>> + "MetricExpr": "PM_EXEC_STALL_PTESYNC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "PTESYNC_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction cannot complete because the thread was blocked",
>> + "MetricExpr": "PM_CMPL_STALL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction cannot complete because it was interrupted by ANY exception",
>> + "MetricExpr": "PM_CMPL_STALL_EXCEPTION / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "EXCEPTION_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is stuck at finish waiting for the non-speculative finish of
>> either a stcx waiting for its result or a load waiting for non-critical
>> sectors of data and ECC",
>> + "MetricExpr": "PM_CMPL_STALL_MEM_ECC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "MEM_ECC_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction cannot complete the instruction is a stcx waiting for resolution
>> from the nest",
>> + "MetricExpr": "PM_CMPL_STALL_STCX / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "STCX_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is a LWSYNC instruction waiting to complete",
>
> Sometimes instruction mnemonics are ALL CAPS, like here, and sometimes not,
> like "stcx", above. Pick one style. Also pick whether the mnemonic is
> followed by "instruction" or not. I prefer including "instruction" for
> clarity.
>
>> + "MetricExpr": "PM_CMPL_STALL_LWSYNC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "LWSYNC_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction is a HWSYNC instruction stuck at finish waiting for a response
>> from the L2",
>> + "MetricExpr": "PM_CMPL_STALL_HWSYNC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "HWSYNC_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction required special handling before completion",
>> + "MetricExpr": "PM_CMPL_STALL_SPECIAL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "SPECIAL_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, disp_stall_translation
>> or children are miscounting",
>
> Are these "Should equal 0" metrics generally useful?
>
>> + "MetricExpr": "DISPATCHED_TRANSLATION_CPI -
>> (DISPATCHED_IERAT_ONLY_MISS_CPI + DISPATCHED_ITLB_MISS_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_DISPATCHED_TRANSLATION_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, disp_stall_ic_miss or
>> children are miscounting",
>> + "MetricExpr": "DISPATCHED_IC_MISS_CPI - (DISPATCHED_IC_L2_CPI +
>> DISPATCHED_IC_L3_CPI + DISPATCHED_IC_L3MISS_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_DISPATCHED_IC_MISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not,
>> disp_stall_br_mpred_icmiss or children are miscounting",
>> + "MetricExpr": "DISPATCHED_BR_MPRED_ICMISS_CPI -
>> (DISPATCHED_BR_MPRED_IC_L2_CPI + DISPATCHED_BR_MPRED_IC_L3_CPI +
>> DISPATCHED_BR_MPRED_IC_L3MISS_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_DISPATCHED_BR_MPRED_ICMISS_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, disp_stall_held_rename
>> or children are miscounting",
>> + "MetricExpr": "DISPATCHED_HELD_RENAME_CPI -
>> (DISPATCHED_HELD_STF_MAPPER_CPI + DISPATCHED_HELD_XVFC_MAPPER_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_DISPATCHED_HELD_RENAME_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, disp_stall_held or
>> children are miscounting",
>> + "MetricExpr": "DISPATCHED_HELD_CPI - (DISP_HELD_STALL_SYNC_CPI +
>> DISP_HELD_STALL_SCOREBOARD_CPI + DISP_HELD_STALL_ISSQ_FULL_CPI +
>> DISPATCHED_HELD_RENAME_CPI + DISPATCHED_HELD_OTHER_CPI +
>> DISPATCHED_HELD_HALT_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_DISPATCHED_HELD_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, disp_stall or children
>> are miscounting",
>> + "MetricExpr": "DISPATCHED_CPI - (DISPATCHED_FLUSH_CPI +
>> DISPATCHED_TRANSLATION_CPI + DISPATCHED_IC_MISS_CPI +
>> DISPATCHED_BR_MPRED_ICMISS_CPI + DISPATCHED_BR_MPRED_CPI +
>> DISPATCHED_HELD_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_DISPATCHED_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, exec_stall_translation
>> or children are miscounting",
>> + "MetricExpr": "TRANSLATION_STALL_CPI - (DERAT_ONLY_MISS_STALL_CPI +
>> DERAT_DTLB_MISS_STALL_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_TRANSLATION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, exec_stall_dmiss_l2l3
>> or children are miscounting",
>> + "MetricExpr": "DMISS_L2L3_STALL_CPI -
>> (DMISS_L2L3_CONFLICT_STALL_CPI + DMISS_L2L3_NOCONFLICT_STALL_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_DMISS_L2L3_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not,
>> exec_stall_dmiss_l3miss or children are miscounting",
>> + "MetricExpr": "DMISS_L3MISS_STALL_CPI - (DMISS_L21_L31_STALL_CPI +
>> DMISS_LMEM_STALL_CPI + DMISS_OFF_CHIP_STALL_CPI + DMISS_OFF_NODE_STALL_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_DMISS_L3MISS_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, exec_stall_load or
>> children are miscounting",
>> + "MetricExpr": "LOAD_STALL_CPI - (DMISS_L2L3_STALL_CPI +
>> DMISS_L3MISS_STALL_CPI + TLBIEL_STALL_CPI + LOAD_FINISH_STALL_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_LOAD_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, exec_stall_store or
>> children are miscounting",
>> + "MetricExpr": "STORE_STALL_CPI - (STORE_PIPE_STALL_CPI +
>> STORE_MISS_STALL_CPI + TLBIE_STALL_CPI + PTESYNC_STALL_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_STORE_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, exec_stall_lsu or
>> children are miscounting",
>> + "MetricExpr": "LSU_STALL_CPI - (LOAD_STALL_CPI + STORE_STALL_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_LSU_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, cmpl_stall or children
>> are miscounting",
>> + "MetricExpr": "COMPLETION_STALL_CPI -
>> (EXCEPTION_COMPLETION_STALL_CPI + MEM_ECC_COMPLETION_STALL_CPI +
>> STCX_COMPLETION_STALL_CPI + LWSYNC_COMPLETION_STALL_CPI +
>> HWSYNC_COMPLETION_STALL_CPI + SPECIAL_COMPLETION_STALL_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_COMPLETION_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, exec_stall or children
>> are miscounting",
>> + "MetricExpr": "EXECUTION_STALL_CPI - (NTC_FLUSH_STALL_CPI +
>> FIN_AT_DISP_STALL_CPI + BRU_STALL_CPI + SIMPLE_FX_STALL_CPI + VSU_STALL_CPI
>> + TRANSLATION_STALL_CPI + LSU_STALL_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_STALL_CPI"
>> + },
>> + {
>> + "BriefDescription": "Should equal 0. If not, pm_cyc or children are
>> miscounting",
>> + "MetricExpr": "CYCLES_PER_INSTRUCTION - (DISPATCHED_CPI +
>> ISSUE_STALL_CPI + EXECUTION_STALL_CPI + COMPLETION_STALL_CPI)",
>> + "MetricGroup": "CPI",
>> + "MetricName": "OTHER_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when dispatch
>> was stalled because Fetch was being held, so there was nothing in the
>> pipeline for this thread",
>
> s/Fetch/fetch/
> extra space after "held,"
>
>> + "MetricExpr": "PM_DISP_STALL_FETCH / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_FETCH_CPI"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntc
>> instruction was held at dispatch because of power management",
>> + "MetricExpr": "PM_DISP_STALL_HELD_HALT_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "CPI",
>> + "MetricName": "DISPATCHED_HELD_HALT_CPI"
>> + },
>> + {
>> + "BriefDescription": "Percentage of flushes per completed
>> instruction",
>> + "MetricExpr": "PM_FLUSH / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "FLUSH_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of flushes due to a branch
>> mispredict per instruction",
>> + "MetricExpr": "PM_FLUSH_MPRED / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "BR_MPRED_FLUSH_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of branch mispredictions per
>> completed instruction",
>> + "MetricExpr": "PM_BR_MPRED_CMPL / PM_RUN_INST_CMPL",
>> + "MetricGroup": "Others",
>> + "MetricName": "BRANCH_MISPREDICTION_RATE"
>> + },
>> + {
>> + "BriefDescription": "Percentage of finished loads that missed in
>> the L1",
>> + "MetricExpr": "PM_LD_MISS_L1 / PM_LD_REF_L1 * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "L1_LD_MISS_RATIO",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed instructions that were
>> loads that missed the L1",
>> + "MetricExpr": "PM_LD_MISS_L1 / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "L1_LD_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of instructions when the DPTEG
>> required for the load/store instruction in execution was missing from the
>> TLB",
>> + "MetricExpr": "PM_DTLB_MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Others",
>> + "MetricName": "DTLB_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of instruction dispatched per
>> instruction completed",
>
> s/instruction/instrucions/
>
>> + "MetricExpr": "PM_INST_DISP / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "DISPATCH_PER_INST_CMPL"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed instructions that were
>> a demand load that did not hit in the L1 or L2",
>> + "MetricExpr": "PM_DATA_FROM_L2MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "L2_LD_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed instructions that were
>> demand fetches that missed the L1 instruction cache",
>> + "MetricExpr": "PM_L1_ICACHE_MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Instruction_Misses",
>> + "MetricName": "L1_INST_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed instructions that were
>> demand fetches that reloaded from beyond the L3 instruction cache",
>> + "MetricExpr": "PM_INST_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "L3_INST_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of completed instructions per
>> cycle",
>> + "MetricExpr": "PM_INST_CMPL / PM_CYC",
>> + "MetricGroup": "General",
>> + "MetricName": "IPC"
>> + },
>> + {
>> + "BriefDescription": "Average number of cycles per completed
>> instruction group",
>> + "MetricExpr": "PM_CYC / PM_1PLUS_PPC_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "CYCLES_PER_COMPLETED_INSTRUCTIONS_SET"
>> + },
>> + {
>> + "BriefDescription": "Percentage of cycles when at least 1
>> instruction dispatched",
>> + "MetricExpr": "PM_1PLUS_PPC_DISP / PM_RUN_CYC * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "CYCLES_ATLEAST_ONE_INST_DISPATCHED",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Rate of finished loads per completed
>> instruction",
>
> Most similar "rate" metrics are using the phrase "average number of".
> Do we want to use that here as well? (Applies to all "rate" metrics.)
>
>> + "MetricExpr": "PM_LD_REF_L1 / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "LOADS_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Rate of finished stores per completed
>> instruction",
>> + "MetricExpr": "PM_ST_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "STORES_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand loads that reloaded from
>> beyond the L2 per completed instruction",
>> + "MetricExpr": "PM_DATA_FROM_L2MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "dL1_Reloads",
>> + "MetricName": "DL1_RELOAD_FROM_L2_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand loads that reloaded from
>> beyond the L3 per completed instruction",
>> + "MetricExpr": "PM_DATA_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "dL1_Reloads",
>> + "MetricName": "DL1_RELOAD_FROM_L3_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses with 4k page size
>> per completed run instruction",
>
> When PM_RUN_INST_CMPL is used, sometimes we say "run instruction",
> and sometimes we say "completed instruction". Let's pick one.
>
>> + "MetricExpr": "PM_DERAT_MISS_4K / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_4K_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses with 64k page size
>> per completed run instruction",
>> + "MetricExpr": "PM_DERAT_MISS_64K / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_64K_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of run cycles per completed run
>> instruction",
>
> Here we cover our bases and say "completed run instruction". ;-)
> Let's convert this one to whichever phrase is chosen for PM_RUN_INST_CMPL.
> Seen below, too.
>
>> + "MetricExpr": "PM_RUN_CYC / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "RUN_CPI"
>> + },
>> + {
>> + "BriefDescription": "Total number of run cycles",
>> + "MetricExpr": "PM_RUN_CYC",
>
> Isn't this more an event than a metric?
> Does it need to be included here?
>
>> + "MetricGroup": "General",
>> + "MetricName": "TOTAL_RUN_CYCLES"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses per completed run
>> instruction",
>> + "MetricExpr": "PM_DERAT_MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Average number of completed run instructions
>> per run cycle",
>> + "MetricExpr": "PM_RUN_INST_CMPL / PM_RUN_CYC",
>> + "MetricGroup": "General",
>> + "MetricName": "RUN_IPC"
>> + },
>> + {
>> + "BriefDescription": "Average number of instruction completed per
>> instruction group",
>
> s/instruction/instructions/
>
>> + "MetricExpr": "PM_RUN_INST_CMPL / PM_1PLUS_PPC_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "AVERAGE_COMPLETED_INSTRUCTION_SET_SIZE"
>> + },
>> + {
>> + "BriefDescription": "Rate of finished instructions per completed
>> instructions",
>
>
>> + "MetricExpr": "PM_INST_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "INST_FIN_PER_CMPL"
>> + },
>> + {
>> + "BriefDescription": "Average cycles per instruction when the ntf
>> instruction is completing and the finish was overlooked",
>
> s/ntf/NTF/
> "overlooked" seems like an odd term.
>
>> + "MetricExpr": "PM_EXEC_STALL_UNKNOWN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "EXEC_STALL_UNKOWN_CPI"
>> + },
>> + {
>> + "BriefDescription": "Percentage of finished branches that were
>> taken",
>> + "MetricExpr": "PM_BR_TAKEN_CMPL / PM_BR_FIN * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "TAKEN_BRANCHES",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of completed instructions that were
>> a demand load that did not hit in the L1, L2, or the L3",
>> + "MetricExpr": "PM_DATA_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "L3_LD_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Rate of finished branches per completed
>> instruction",
>> + "MetricExpr": "PM_BR_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "BRANCHES_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Rate of instructions finished in the LSU per
>> completed instruction",
>> + "MetricExpr": "PM_LSU_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "LSU_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Rate of instructions finished in the VSU per
>> completed instruction",
>> + "MetricExpr": "PM_VSU_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "VSU_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Rate of TLBIE instructions finished in the LSU
>> per completed instruction",
>> + "MetricExpr": "PM_TLBIE_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "TLBIE_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Rate of STCX instructions finshed per
>> completed instruction",
>> + "MetricExpr": "PM_STCX_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "STXC_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Rate of LARX instructions finshed per
>> completed instruction",
>> + "MetricExpr": "PM_LARX_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "LARX_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Rate of ptesync instructions finshed per
>> completed instruction",
>> + "MetricExpr": "PM_PTESYNC_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "PTESYNC_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Rate of simple fixed-point instructions
>> finshed in the store unit per completed instruction",
>
> s/store unit/LSU/ ?
>
>> + "MetricExpr": "PM_FX_LSU_FIN / PM_RUN_INST_CMPL",
>> + "MetricGroup": "General",
>> + "MetricName": "FX_PER_INST"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand load misses that reloaded
>> the L1 cache",
>> + "MetricExpr": "PM_LD_DEMAND_MISS_L1 / PM_LD_MISS_L1 * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "DL1_MISS_RELOADS",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand load misses that reloaded
>> from beyond the local L2",
>> + "MetricExpr": "PM_DATA_FROM_L2MISS / PM_LD_DEMAND_MISS_L1 * 100",
>> + "MetricGroup": "dL1_Reloads",
>> + "MetricName": "DL1_RELOAD_FROM_L2_MISS",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of demand load misses that reloaded
>> from beyond the local L3",
>> + "MetricExpr": "PM_DATA_FROM_L3MISS / PM_LD_DEMAND_MISS_L1 * 100",
>> + "MetricGroup": "dL1_Reloads",
>> + "MetricName": "DL1_RELOAD_FROM_L3_MISS",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of cycles stalled due to the ntc
>> instruction waiting for a load miss to resolve from a source beyond the
>> local L2 and local L3",
>> + "MetricExpr": "DMISS_L3MISS_STALL_CPI / RUN_CPI * 100",
>> + "MetricGroup": "General",
>> + "MetricName": "DCACHE_MISS_CPI",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses with 2M page size
>> per completed run instruction",
>> + "MetricExpr": "PM_DERAT_MISS_2M / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_2M_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses with 16M page size
>> per completed run instruction",
>> + "MetricExpr": "PM_DERAT_MISS_16M / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_16M_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "DERAT miss ratio for 4K page size",
>> + "MetricExpr": "PM_DERAT_MISS_4K / PM_DERAT_MISS",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_4K_MISS_RATIO"
>> + },
>> + {
>> + "BriefDescription": "DERAT miss ratio for 2M page size",
>> + "MetricExpr": "PM_DERAT_MISS_2M / PM_DERAT_MISS",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_2M_MISS_RATIO"
>> + },
>> + {
>> + "BriefDescription": "DERAT miss ratio for 16M page size",
>> + "MetricExpr": "PM_DERAT_MISS_16M / PM_DERAT_MISS",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_16M_MISS_RATIO"
>> + },
>> + {
>> + "BriefDescription": "DERAT miss ratio for 64K page size",
>> + "MetricExpr": "PM_DERAT_MISS_64K / PM_DERAT_MISS",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_64K_MISS_RATIO"
>> + },
>> + {
>> + "BriefDescription": "Percentage of DERAT misses that resulted in
>> TLB reloads",
>> + "MetricExpr": "PM_DTLB_MISS / PM_DERAT_MISS * 100",
>> + "MetricGroup": "Translation",
>> + "MetricName": "DERAT_MISS_RELOAD",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of ICache misses that were reloaded
>> from beyond the local L3",
>
> Sometimes we use "ICache" and sometimes "icache". Pick one.
>
>> + "MetricExpr": "PM_INST_FROM_L3MISS / PM_L1_ICACHE_MISS * 100",
>> + "MetricGroup": "Instruction_Misses",
>> + "MetricName": "INST_FROM_L3_MISS",
>> + "ScaleUnit": "1%"
>> + },
>> + {
>> + "BriefDescription": "Percentage of ICache reloads from the beyond
>> the L3 per completed run instruction",
>> + "MetricExpr": "PM_INST_FROM_L3MISS / PM_RUN_INST_CMPL * 100",
>> + "MetricGroup": "Instruction_Misses",
>> + "MetricName": "INST_FROM_L3_MISS_RATE",
>> + "ScaleUnit": "1%"
>> + }
>> +]
>
> PC
>
