At this point 'dma_map_single()' has not been called yet, so there is no
point in branching in the error handling path to undo it.
Use a direct return instead.
Fixes: 1a4bb93f7955 ("powerpc/512x: add LocalPlus Bus FIFO device driver")
Signed-off-by: Christophe JAILLET <christophe.jail...@wanadoo.fr>
---
This patch is speculative. Review with care.
---
arch/powerpc/platforms/512x/mpc512x_lpbfifo.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
index 04bf6ecf7d55..85e0fa7d902b 100644
--- a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
+++ b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
@@ -240,10 +240,8 @@ static int mpc512x_lpbfifo_kick(void)
dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
/* Make DMA channel work with LPB FIFO data register */
- if (dma_dev->device_config(lpbfifo.chan, &dma_conf)) {
- ret = -EINVAL;
- goto err_dma_prep;
- }
+ if (dma_dev->device_config(lpbfifo.chan, &dma_conf))
+ return -EINVAL;
sg_init_table(&sg, 1);
--
2.30.2
