On 6/11/08, Wolfram Sang <[EMAIL PROTECTED]> wrote:
> On Tue, Jun 10, 2008 at 10:40:45PM -0400, Jon Smirl wrote:
> > Convert i2c-mpc from a platform driver into an of_platform driver.
> > This patch is much smaller since Jochen already added
> > of_find_i2c_driver(). Versions of this have been posted before.
> >
> > Signed-ff-by: Jon Smirl <[EMAIL PROTECTED]>
>
>
> Typo: Signed-off... (I'm curious, do such typos enforce resending the
> patch?)
I just cut and pasted this version to get the comments. Next pass I
will send it using stgit which will add the right signed-off line and
fix the wrapping.
>
> Tested-by: Wolfram Sang <[EMAIL PROTECTED]>
>
>
> >
> > --
> >
> > drivers/i2c/busses/i2c-mpc.c | 105
> +++++++++++++++++++++++++-----------------
> > 1 files changed, 63 insertions(+), 42 deletions(-)
> >
> >
> > diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> > index a076129..76d8091 100644
> > --- a/drivers/i2c/busses/i2c-mpc.c
> > +++ b/drivers/i2c/busses/i2c-mpc.c
> > @@ -18,6 +18,8 @@
> > #include <linux/sched.h>
> > #include <linux/init.h>
> > #include <linux/platform_device.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/of_i2c.h>
> >
> > #include <asm/io.h>
> > #include <linux/fsl_devices.h>
> > @@ -25,13 +27,13 @@
> > #include <linux/interrupt.h>
> > #include <linux/delay.h>
> >
> > -#define MPC_I2C_ADDR 0x00
> > +#define DRV_NAME "mpc-i2c"
> > +
> > #define MPC_I2C_FDR 0x04
> > #define MPC_I2C_CR 0x08
> > #define MPC_I2C_SR 0x0c
> > #define MPC_I2C_DR 0x10
> > #define MPC_I2C_DFSRR 0x14
> > -#define MPC_I2C_REGION 0x20
> >
> > #define CCR_MEN 0x80
> > #define CCR_MIEN 0x40
> > @@ -315,102 +317,121 @@ static struct i2c_adapter mpc_ops = {
> > .timeout = 1,
> > };
> >
> > -static int fsl_i2c_probe(struct platform_device *pdev)
> > +static int fsl_i2c_probe(struct of_device *op, const struct
> > of_device_id *match)
>
>
> The above two lines have to be concatenated, otherwise the patch will
> not apply. Also, __devinit?
>
>
> > {
> > int result = 0;
> > struct mpc_i2c *i2c;
> > - struct fsl_i2c_platform_data *pdata;
> > - struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > -
> > - pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
> >
> > i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
> > if (!i2c)
> > return -ENOMEM;
> >
> > - i2c->irq = platform_get_irq(pdev, 0);
> > - if (i2c->irq < 0)
> > - i2c->irq = NO_IRQ; /* Use polling */
> > + if (of_get_property(op->node, "dfsrr", NULL))
> > + i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
> >
> > - i2c->flags = pdata->device_flags;
> > - init_waitqueue_head(&i2c->queue);
> > + if (of_device_is_compatible(op->node, "mpc5200-i2c"))
> > + i2c->flags |= FSL_I2C_DEV_CLOCK_5200;
> >
> > - i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION);
> > + init_waitqueue_head(&i2c->queue);
> >
> > + i2c->base = of_iomap(op->node, 0);
> > if (!i2c->base) {
> > printk(KERN_ERR "i2c-mpc - failed to map controller\n");
> > result = -ENOMEM;
> > goto fail_map;
> > }
> >
> > - if (i2c->irq != NO_IRQ)
> > - if ((result = request_irq(i2c->irq, mpc_i2c_isr,
> > - IRQF_SHARED, "i2c-mpc", i2c)) < 0)
> {
> > - printk(KERN_ERR
> > - "i2c-mpc - failed to attach interrupt\n");
> > - goto fail_irq;
> > - }
> > + i2c->irq = irq_of_parse_and_map(op->node, 0);
> > + if (i2c->irq == NO_IRQ) {
> > + result = -ENXIO;
>
>
> Minor thing, but I wonder if -EINVAL is more appropriate?
>
>
> > + goto fail_irq;
> > + }
> > +
> > + result = request_irq(i2c->irq, mpc_i2c_isr,
> > + IRQF_SHARED, "i2c-mpc", i2c);
> > + if (result < 0) {
> > + printk(KERN_ERR "i2c-mpc - failed to attach interrupt\n");
> > + goto fail_request;
> > + }
> >
> > mpc_i2c_setclock(i2c);
> > - platform_set_drvdata(pdev, i2c);
> > +
> > + dev_set_drvdata(&op->dev, i2c);
> >
> > i2c->adap = mpc_ops;
> > - i2c->adap.nr = pdev->id;
> > i2c_set_adapdata(&i2c->adap, i2c);
> > - i2c->adap.dev.parent = &pdev->dev;
> > - if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) {
> > + i2c->adap.dev.parent = &op->dev;
> > +
> > + result = i2c_add_adapter(&i2c->adap);
> > + if (result < 0) {
> > printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
> > goto fail_add;
> > }
> > + of_register_i2c_devices(&i2c->adap, op->node);
> >
> > return result;
> >
> > - fail_add:
> > - if (i2c->irq != NO_IRQ)
> > - free_irq(i2c->irq, i2c);
> > - fail_irq:
> > + fail_add:
> > + dev_set_drvdata(&op->dev, NULL);
> > + free_irq(i2c->irq, i2c);
> > + fail_request:
> > + irq_dispose_mapping(i2c->irq);
> > + fail_irq:
> > iounmap(i2c->base);
> > - fail_map:
> > + fail_map:
> > kfree(i2c);
> > return result;
> > };
> >
> > -static int fsl_i2c_remove(struct platform_device *pdev)
> > +static int fsl_i2c_remove(struct of_device *op)
>
>
> __devexit?
>
>
> > {
> > - struct mpc_i2c *i2c = platform_get_drvdata(pdev);
> > + struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
> >
> > i2c_del_adapter(&i2c->adap);
> > - platform_set_drvdata(pdev, NULL);
> > + dev_set_drvdata(&op->dev, NULL);
> >
> > if (i2c->irq != NO_IRQ)
> > free_irq(i2c->irq, i2c);
> >
> > + irq_dispose_mapping(i2c->irq);
> > iounmap(i2c->base);
> > kfree(i2c);
> > return 0;
> > };
> >
> > -/* work with hotplug and coldplug */
> > -MODULE_ALIAS("platform:fsl-i2c");
> > +static const struct of_device_id mpc_i2c_of_match[] = {
> > + {
> > + .compatible = "fsl-i2c",
> > + },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
> > +
> >
> > /* Structure for a device driver */
> > -static struct platform_driver fsl_i2c_driver = {
> > - .probe = fsl_i2c_probe,
> > - .remove = fsl_i2c_remove,
> > - .driver = {
> > - .owner = THIS_MODULE,
> > - .name = "fsl-i2c",
> > +static struct of_platform_driver mpc_i2c_driver = {
> > + .match_table = mpc_i2c_of_match,
> > + .probe = fsl_i2c_probe,
> > + .remove = __devexit_p(fsl_i2c_remove),
> > + .driver = {
> > + .owner = THIS_MODULE,
> > + .name = DRV_NAME,
> > },
> > };
> >
> > static int __init fsl_i2c_init(void)
> > {
> > - return platform_driver_register(&fsl_i2c_driver);
> > + int rv;
> > +
> > + rv = of_register_platform_driver(&mpc_i2c_driver);
> > + if (rv)
> > + printk(KERN_ERR DRV_NAME " of_register_platform_driver
> failed (%i)\n", rv);
> > + return rv;
> > }
> >
> > static void __exit fsl_i2c_exit(void)
> > {
> > - platform_driver_unregister(&fsl_i2c_driver);
> > + of_unregister_platform_driver(&mpc_i2c_driver);
> > }
> >
> > module_init(fsl_i2c_init);
> >
>
> > _______________________________________________
> > i2c mailing list
> > [EMAIL PROTECTED]
> > http://lists.lm-sensors.org/mailman/listinfo/i2c
>
> Kind regards,
>
> Wolfram
>
>
> --
> Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de
> Pengutronix - Linux Solutions for Science and Industry
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.6 (GNU/Linux)
>
> iD8DBQFIT/awD27XaX1/VRsRAoPrAJ0eWru6TJizVxfksnhS3KjZ7WHhmACcCbXJ
> YsAUtKZSxlJAV5r/G22BlaE=
> =YX24
> -----END PGP SIGNATURE-----
>
>
>
--
Jon Smirl
[EMAIL PROTECTED]
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
