[+Andrey]
Dear Christophe,
Am 07.05.21 um 10:31 schrieb Christophe Leroy:
Le 06/05/2021 à 21:32, Paul Menzel a écrit :
[corrected subject]
Am 06.05.21 um 21:31 schrieb Paul Menzel:
On the POWER8 system IBM S822LC, Linux 5.13+, built with USSAN, logs
the warning below.
```
[ 0.030091]
================================================================================
[ 0.030295] UBSAN: array-index-out-of-bounds in
arch/powerpc/kernel/legacy_serial.c:359:56
[ 0.030325] index -1 is out of range for type 'legacy_serial_info [8]'
[ 0.030350] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.12.0+ #2
[ 0.030360] Call Trace:
[ 0.030363] [c000000024f1bad0] [c0000000009f4330] dump_stack+0xc4/0x114
(unreliable)
[ 0.030386] [c000000024f1bb20] [c0000000009efed0] ubsan_epilogue+0x18/0x78
[ 0.030400] [c000000024f1bb80] [c0000000009efafc]
__ubsan_handle_out_of_bounds+0xac/0xd0
[ 0.030414] [c000000024f1bc20] [c000000001711588]
ioremap_legacy_serial_console+0x54/0x144
[ 0.030430] [c000000024f1bc70] [c0000000000123c0] do_one_initcall+0x60/0x2c0
[ 0.030444] [c000000024f1bd40] [c000000001704bc4]
kernel_init_freeable+0x19c/0x25c
[ 0.030458] [c000000024f1bda0] [c000000000012a2c] kernel_init+0x2c/0x180
[ 0.030471] [c000000024f1be10] [c00000000000d6ec]
ret_from_kernel_thread+0x5c/0x70
[ 0.030484] ================================================================================
[ 0.030641]
================================================================================
[ 0.030668] UBSAN: array-index-out-of-bounds in
arch/powerpc/kernel/legacy_serial.c:360:58
[ 0.030697] index -1 is out of range for type 'plat_serial8250_port [9]'
[ 0.030721] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.12.0+ #2
[ 0.030730] Call Trace:
[ 0.030733] [c000000024f1bad0] [c0000000009f4330] dump_stack+0xc4/0x114
(unreliable)
[ 0.030749] [c000000024f1bb20] [c0000000009efed0] ubsan_epilogue+0x18/0x78
[ 0.030762] [c000000024f1bb80] [c0000000009efafc]
__ubsan_handle_out_of_bounds+0xac/0xd0
[ 0.030775] [c000000024f1bc20] [c0000000017115a0]
ioremap_legacy_serial_console+0x6c/0x144
[ 0.030790] [c000000024f1bc70] [c0000000000123c0] do_one_initcall+0x60/0x2c0
[ 0.030802] [c000000024f1bd40] [c000000001704bc4]
kernel_init_freeable+0x19c/0x25c
[ 0.030816] [c000000024f1bda0] [c000000000012a2c] kernel_init+0x2c/0x180
[ 0.030829] [c000000024f1be10] [c00000000000d6ec]
ret_from_kernel_thread+0x5c/0x70
[ 0.030842]
================================================================================
```
The function is as follows, so when legacy_serial_console == -1 as in
your situation, the pointers are just not used.
static int __init ioremap_legacy_serial_console(void)
{
struct legacy_serial_info *info =
&legacy_serial_infos[legacy_serial_console];
struct plat_serial8250_port *port =
&legacy_serial_ports[legacy_serial_console];
void __iomem *vaddr;
if (legacy_serial_console < 0)
return 0;
...
}
When I look into the generated code (UBSAN not selected), we see the
verification and the bail-out is done prior to any calculation based on
legacy_serial_console.
00000000 <ioremap_legacy_serial_console>:
0: 94 21 ff e0 stwu r1,-32(r1)
4: 3d 20 00 00 lis r9,0
6: R_PPC_ADDR16_HA .data
8: 7c 08 02 a6 mflr r0
c: bf 81 00 10 stmw r28,16(r1)
10: 3b 80 00 00 li r28,0
14: 83 a9 00 00 lwz r29,0(r9)
16: R_PPC_ADDR16_LO .data
18: 90 01 00 24 stw r0,36(r1)
1c: 2c 1d 00 00 cmpwi r29,0
20: 41 80 00 80 blt a0 <ioremap_legacy_serial_console+0xa0>
So, is it normal that UBSAN reports an error here ?
If it’s useful, I could disassemble the code here. But please tell me how.
Sorry, I do not know. I just selected the option, and saw the error.
Maybe Andrey has an idea.
Kind regards,
Paul
