Taken from the PowerPC ISA BookIII-E specifies that DBCR0 is different for all others that are not ppc405 chips. So I have now chnaged the conditional to reflect this. Also added definitions needed for DBCR1 & DBCR2.
Signed-off-by: Jerone Young <[EMAIL PROTECTED]> diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h --- a/include/asm-powerpc/reg_booke.h +++ b/include/asm-powerpc/reg_booke.h @@ -253,6 +253,7 @@ #define ESR_BO 0x00020000 /* Byte Ordering */ /* Bit definitions related to the DBCR0. */ +#if defined(CONFIG_40x) #define DBCR0_EDM 0x80000000 /* External Debug Mode */ #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ #define DBCR0_RST 0x30000000 /* all the bits in the RST field */ @@ -275,6 +276,46 @@ #define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ +#elif defined(CONFIG_BOOKE) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_IC 0x08000000 /* Instruction Completion */ +#define DBCR0_BT 0x04000000 /* Branch Taken */ +#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IA3 0x00200000 /* Instr Addr compare 3 enable */ +#define DBCR0_IA4 0x00100000 /* Instr Addr compare 4 enable */ +#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ +#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ +#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ +#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ +#define DBCR0_RET 0x00008000 /* Return Debug Event */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ +#endif + +/* Bit definitions related to the DBCR1. */ +#if defined(CONFIG_BOOKE) +#define DBCR1_IA12 0x00800000 /* Instr Addr 1-2 range enable */ +#define DBCR1_IA12X 0x00C00000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR1_IA12T 0x00010000 /* Instr Addr 1-2 range Toggle */ +#define DBCR1_IA34 0x00000080 /* Instr Addr 3-4 range enable */ +#define DBCR1_IA34X 0x000000C0 /* Instr Addr 3-4 range eXclusive */ +#define DBCR1_IA34T 0x00000001 /* Instr Addr 3-4 range Toggle */ +#endif + +/* Bit definitions related to the DBCR2. */ +#if defined(CONFIG_BOOKE) +#define DBCR2_DAC12 0x00800000 /* DAC 1-2 range enable */ +#define DBCR2_DAC12X 0x00C00000 /* DAC 1-2 range eXclusive */ +#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ +#endif /* Bit definitions related to the TCR. */ #define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
