On May 30, 2008, at 1:36 AM, Wolfgang Grandegger wrote:

This patch extends the FSL UPM NAND driver from Anton Vorontsov to
support for the TQM85xx modules. Unfortunately, the hardware does
not support the R/B pins of the NAND chip and therefore the specified
maximum delay time must used. It therefore re-introduces the chip- delay
property.

Note: this patch is based on a patch Anton Vorontsov posted to this list: See http://ozlabs.org/pipermail/linuxppc-dev/2008-April/055587.html .
     It should show up mainstream soon.

Signed-off-by: Wolfgang Grandegger <[EMAIL PROTECTED]>
---
drivers/mtd/nand/Kconfig   |    2 +-
drivers/mtd/nand/fsl_upm.c |   30 +++++++++++++++++++++---------
include/linux/of_gpio.h    |    2 +-
3 files changed, 23 insertions(+), 11 deletions(-)

You really need to CC the MTD list as this should go via them. Also you're adding a new property and there should be updates to booting-w- o-f for it.

- k

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to