On Sun, Sep 06, 2020 at 12:06:12AM +0200, Christian Lamparter wrote:
> This patch adds an DTSI-File that can be used by various device-tree
> files for APM82181-based devices.
> 
> Some of the nodes (like UART, PCIE, SATA) are used by the uboot and
> need to stick with the naming-conventions of the old times'.
> I've added comments whenever this was the case.
> 
> Signed-off-by: Chris Blake <chrisrblak...@gmail.com>
> Signed-off-by: Christian Lamparter <chunk...@gmail.com>
> ---
> rfc v1 -> v2:
>       - removed PKA (this CryptoPU will need driver)
>       - stick with compatibles, nodes, ... from either
>         Bluestone (APM82181) or Canyonlands (PPC460EX).
>       - add labels for NAND and NOR to help with access.
> v2 -> v3:
>       - nodename of pciex@d.... was changed to pcie@d..
>         due to upstream patch.
>       - use simple-bus on the ebc, opb and plb nodes
> ---
>  arch/powerpc/boot/dts/apm82181.dtsi | 466 ++++++++++++++++++++++++++++
>  1 file changed, 466 insertions(+)
>  create mode 100644 arch/powerpc/boot/dts/apm82181.dtsi
> 
> diff --git a/arch/powerpc/boot/dts/apm82181.dtsi 
> b/arch/powerpc/boot/dts/apm82181.dtsi
> new file mode 100644
> index 000000000000..60283430978d
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/apm82181.dtsi
> @@ -0,0 +1,466 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Device Tree template include for various APM82181 boards.
> + *
> + * The SoC is an evolution of the PPC460EX predecessor.
> + * This is why dt-nodes from the canyonlands EBC, OPB, USB,
> + * DMA, SATA, EMAC, ... ended up in here.
> + *
> + * Copyright (c) 2010, Applied Micro Circuits Corporation
> + * Author: Tirumala R Marri <tma...@apm.com>,
> + *      Christian Lamparter <chunk...@gmail.com>,
> + *      Chris Blake <chrisrblak...@gmail.com>
> + */
> +
> +#include <dt-bindings/dma/dw-dmac.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +     #address-cells = <2>;
> +     #size-cells = <1>;
> +     dcr-parent = <&{/cpus/cpu@0}>;
> +
> +     aliases {
> +             ethernet0 = &EMAC0; /* needed for BSP u-boot */
> +     };
> +
> +     cpus {
> +             #address-cells = <1>;
> +             #size-cells = <0>;
> +
> +             CPU0: cpu@0 {
> +                     device_type = "cpu";
> +                     model = "PowerPC,apm82181";

This doesn't match the existing bluestone dts file.

Please separate any restructuring from changes.

Reply via email to