This is used in precisely one place which is in pseries specific platform
code. There's no need to have the callback in eeh_ops since the platform
chooses the EEH PE addresses anyway. The PowerNV implementation has always
been a stub too so remove it.
Signed-off-by: Oliver O'Halloran <ooh...@gmail.com>
Reviewed-by: Alexey Kardashevskiy <a...@ozlabs.ru>
---
v2: Made "buid" in pseries_eeh_get_pe_addr() an unsigned long to match
the pci_controller type.
---
arch/powerpc/include/asm/eeh.h | 1 -
arch/powerpc/platforms/powernv/eeh-powernv.c | 13 ------------
arch/powerpc/platforms/pseries/eeh_pseries.c | 22 ++++++++++----------
3 files changed, 11 insertions(+), 25 deletions(-)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 9c5ba535f6a1..d619012281bd 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -220,7 +220,6 @@ struct eeh_ops {
int (*init)(void);
struct eeh_dev *(*probe)(struct pci_dev *pdev);
int (*set_option)(struct eeh_pe *pe, int option);
- int (*get_pe_addr)(struct eeh_pe *pe);
int (*get_state)(struct eeh_pe *pe, int *delay);
int (*reset)(struct eeh_pe *pe, int option);
int (*get_log)(struct eeh_pe *pe, int severity, char *drv_log, unsigned
long len);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c
b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 79409e005fcd..bcd0515d8f79 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -535,18 +535,6 @@ static int pnv_eeh_set_option(struct eeh_pe *pe, int
option)
return 0;
}
-/**
- * pnv_eeh_get_pe_addr - Retrieve PE address
- * @pe: EEH PE
- *
- * Retrieve the PE address according to the given tranditional
- * PCI BDF (Bus/Device/Function) address.
- */
-static int pnv_eeh_get_pe_addr(struct eeh_pe *pe)
-{
- return pe->addr;
-}
-
static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
{
struct pnv_phb *phb = pe->phb->private_data;
@@ -1670,7 +1658,6 @@ static struct eeh_ops pnv_eeh_ops = {
.init = pnv_eeh_init,
.probe = pnv_eeh_probe,
.set_option = pnv_eeh_set_option,
- .get_pe_addr = pnv_eeh_get_pe_addr,
.get_state = pnv_eeh_get_state,
.reset = pnv_eeh_reset,
.get_log = pnv_eeh_get_log,
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c
b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 18a2522b9b5e..bcc72b9a5309 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -32,6 +32,8 @@
#include <asm/ppc-pci.h>
#include <asm/rtas.h>
+static int pseries_eeh_get_pe_addr(struct pci_dn *pdn);
+
/* RTAS tokens */
static int ibm_set_eeh_option;
static int ibm_set_slot_reset;
@@ -301,7 +303,7 @@ void pseries_eeh_init_edev(struct pci_dn *pdn)
eeh_edev_dbg(edev, "EEH failed to enable on device (code
%d)\n", ret);
} else {
/* Retrieve PE address */
- edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
+ edev->pe_config_addr = pseries_eeh_get_pe_addr(pdn);
pe.addr = edev->pe_config_addr;
/* Some older systems (Power4) allow the ibm,set-eeh-option
@@ -431,8 +433,10 @@ static int pseries_eeh_set_option(struct eeh_pe *pe, int
option)
* It's notable that zero'ed return value means invalid PE config
* address.
*/
-static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
+static int pseries_eeh_get_pe_addr(struct pci_dn *pdn)
{
+ int config_addr = rtas_config_addr(pdn->busno, pdn->devfn, 0);
+ unsigned long buid = pdn->phb->buid;
int ret = 0;
int rets[3];
@@ -443,18 +447,16 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
* meaningless.
*/
ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
- pe->config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid), 1);
+ config_addr, BUID_HI(buid), BUID_LO(buid), 1);
if (ret || (rets[0] == 0))
return 0;
/* Retrieve the associated PE config address */
ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
- pe->config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid), 0);
+ config_addr, BUID_HI(buid), BUID_LO(buid), 0);
if (ret) {
pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
- __func__, pe->phb->global_number,
pe->config_addr);
+ __func__, pdn->phb->global_number, config_addr);
return 0;
}
@@ -463,11 +465,10 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
- pe->config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid), 0);
+ config_addr, BUID_HI(buid), BUID_LO(buid), 0);
if (ret) {
pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
- __func__, pe->phb->global_number,
pe->config_addr);
+ __func__, pdn->phb->global_number, config_addr);
return 0;
}
@@ -839,7 +840,6 @@ static struct eeh_ops pseries_eeh_ops = {
.init = pseries_eeh_init,
.probe = pseries_eeh_probe,
.set_option = pseries_eeh_set_option,
- .get_pe_addr = pseries_eeh_get_pe_addr,
.get_state = pseries_eeh_get_state,
.reset = pseries_eeh_reset,
.get_log = pseries_eeh_get_log,
--
2.26.2
