On Wed, May 07, 2008 at 01:31:52AM -0700, Boris Shteinbock wrote:
> /* Monitor port/SMC1 */
> smc1: [EMAIL PROTECTED] {
> device_type = "serial";
> compatible = "fsl,mpc8260-smc-uart",
> "fsl,cpm2-smc-uart";
> reg = <0x11a80 0x20 0x1100 0x40>;
>The second reg resource depends on where your firmware set up the SMC pram
>regs. With U-boot, it's usually zero.
>Note that as of 2.6.26-rc1, this is set up dynamically instead, and the
>second resource should be .
Is this correct?
reg = <0x11a80 0x20 0x87fc 2>;
I also understand, that latest development kernel contains some significant
changes in SMC UART code, especially
in muram code, is this correct? So does this reg value reflect this change?
>> Can someone, also, explain, how "fsl, cpm-command" field works,
>It's the device-specific portion of the value that gets written to the CPM
>command register (page, sub-block, and mcc channel).
Is it possible to get a quick list of all values for all 8260 soc devices
somewhere ? Or do I have to dig specific Freescale reference for it?
I am particularly interested in SMC2 and FCC1,2 and 3 ?
Thank you very much
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
