Hi ,boys . I am in the XiDian universtiy of china . I am doing the things ike yours.You can try set ttyUL0,if you use the Uartlite. If it don't work , may be gcc 4.1.0 miscompile the kernel 2.6 , I am using the gcc3.4.4. Good luck
张轶 wrote: > > ---------- Forwarded message ---------- > From: 张轶 <[EMAIL PROTECTED]> > Date: 2008/5/5 > Subject: linux2.6 does not boot from XUP > To: [EMAIL PROTECTED] > > > Hi,Grant > > I hope I could get some advices from you about how to fix the error of > porting linux2.6 to Xilinx XUPV2P. > > The kernel I am using is 2.6.24,gcc 4.1.0,glibc 2.3.6,and the board Xilinx > XUPV2P > > It compiles successfully with some warnings like below: > MODPOST vmlinux.o > WARNING: vmlinux.o(.text+0x223c): Section mismatch: reference to > .init.text:early_init (between 'start_here' and 'initial_mmu') > WARNING: vmlinux.o(.text+0x2254): Section mismatch: reference to > .init.text:machine_init (between 'start_here' and 'initial_mmu') > WARNING: vmlinux.o(.text+0x2258): Section mismatch: reference to > .init.text:MMU_init (between 'start_here' and 'initial_mmu') > WARNING: vmlinux.o(.text+0x22b2): Section mismatch: reference to > .init.text:start_kernel (between 'start_here' and 'initial_mmu') > WARNING: vmlinux.o(.text+0x22b6): Section mismatch: reference to > .init.text:start_kernel (between 'start_here' and 'initial_mmu') > LD vmlinux > > The system is created as ACE file and booted from CF Card > > After uncompressing the kernel,the system hangs.The information is like > below: > > loaded at: 00400000 0056619C > board data at: 00000000 0000007C > relocated to: 00404068 004040E4 > zimage at: 00404E51 00563BF4 > avail ram: 00567000 7C9E2370 > > Linux/PPC load: console=ttyS0,9600 root=/dev/xsysace/disc0/part3 rw > Uncompressing Linux...done. > Now booting the kernel > I wonder if it is the upper WARNINGs that causes the hang of the system, > and > how can I fix it. > > Thanks in advance, any advice would be helpful > > Best Regards > > Yi > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev > -- View this message in context: http://www.nabble.com/Fwd%3A-linux2.6-does-not-boot-from-XUP-tp17074762p17077099.html Sent from the linuxppc-dev mailing list archive at Nabble.com. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
