On Thu, Mar 26, 2020 at 12:40:33PM +0530, Pratik Rajesh Sampat wrote:
> This commit introduces and leverages the Self save API. The difference
> between self-save and self-restore is that the value to be saved for the
> SPR does not need to be passed to the call.
>
> Add the new Self Save OPAL API call in the list of OPAL calls.
> Implement the self saving of the SPRs based on the support populated.
> This commit imposes the self-save over self-restore in case both are
> supported for a particular SPR.
s/imposes/prefers.
>
> Along with support for self-save, kernel supported save restore is also
> populated in the list. This property is only populated for those SPRs
> which encapsulate support from the kernel and hav ethe possibility to
^^^^^^^^^
have the
> garner support from a firmware mode too.
What you mean here is that some of the SPRs which are currently being
saved and restored by the kernel can be leverage the firmware
self-save support when available.
In particular, this is *required* for PTCR in an Ultravisor mode, as
the Hypervisor Kernel is not allowed to restore PTCR while running in
an Ultravisor environment.
>
> In addition, the commit also parses the device tree for nodes self-save,
> self-restore and populate support for the preferred SPRs based on what
> was advertised by the device tree.
>
> In the case a SPR is supported by the firmware self-save, self-restore
> and kernel save restore then the preference of execution is also in the
> same order as above.
>
> Signed-off-by: Pratik Rajesh Sampat <psam...@linux.ibm.com>
Some more comments below.
> ---
> .../bindings/powerpc/opal/power-mgt.txt | 18 +++
> arch/powerpc/include/asm/opal-api.h | 3 +-
> arch/powerpc/include/asm/opal.h | 1 +
> arch/powerpc/platforms/powernv/idle.c | 131 +++++++++++++++++-
> arch/powerpc/platforms/powernv/opal-call.c | 1 +
> 5 files changed, 146 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
> b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
> index 9d619e955576..5fb03c6d7de9 100644
> --- a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
> +++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
> @@ -116,3 +116,21 @@ otherwise. The length of all the property arrays must be
> the same.
> which of the fields of the PMICR are set in the corresponding
> entries in ibm,cpu-idle-state-pmicr. This is an optional
> property on POWER8 and is absent on POWER9.
> +
> +- self-restore:
> + Array of unsigned 64-bit values containing a property for sprn-mask
> + with each bit indicating the index of the supported SPR for the
> + functionality. This is an optional property for both Power8 and Power9
> +
> +- self-save:
> + Array of unsigned 64-bit values containing a property for sprn-mask
> + with each bit indicating the index of the supported SPR for the
> + functionality. This is an optional property for both Power8 and Power9
> +
> +Example of arrangement of self-restore and self-save arrays:
> +For instance if PSSCR is supported, the value is 0x357 = 855.
> +Since the array is of 64 bit values, the index of the array is determined by
> +855 / 64 = 13th element. Within that index, the bit number is determined by
> +855 % 64 = 23rd bit.
> +This means that if the 23rd bit in array[13] is set, then that SPR is
> supported
> +by the corresponding self-save or self-restore API.
> diff --git a/arch/powerpc/include/asm/opal-api.h
> b/arch/powerpc/include/asm/opal-api.h
> index c1f25a760eb1..1b6e1a68d431 100644
> --- a/arch/powerpc/include/asm/opal-api.h
> +++ b/arch/powerpc/include/asm/opal-api.h
> @@ -214,7 +214,8 @@
> #define OPAL_SECVAR_GET 176
> #define OPAL_SECVAR_GET_NEXT 177
> #define OPAL_SECVAR_ENQUEUE_UPDATE 178
> -#define OPAL_LAST 178
> +#define OPAL_SLW_SELF_SAVE_REG 181
> +#define OPAL_LAST 181
>
> #define QUIESCE_HOLD 1 /* Spin all calls at entry */
> #define QUIESCE_REJECT 2 /* Fail all calls with
> OPAL_BUSY */
> diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
> index 9986ac34b8e2..a370b0e8d899 100644
> --- a/arch/powerpc/include/asm/opal.h
> +++ b/arch/powerpc/include/asm/opal.h
> @@ -204,6 +204,7 @@ int64_t opal_handle_hmi2(__be64 *out_flags);
> int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
> int64_t opal_unregister_dump_region(uint32_t id);
> int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
> +int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn);
> int64_t opal_config_cpu_idle_state(uint64_t state, uint64_t flag);
> int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t
> pe_number);
> int64_t opal_pci_get_pbcq_tunnel_bar(uint64_t phb_id, uint64_t *addr);
> diff --git a/arch/powerpc/platforms/powernv/idle.c
> b/arch/powerpc/platforms/powernv/idle.c
> index 858ceb86394d..e77b31621081 100644
> --- a/arch/powerpc/platforms/powernv/idle.c
> +++ b/arch/powerpc/platforms/powernv/idle.c
> @@ -35,13 +35,20 @@
> /*
> * Type of support for each SPR
> * FIRMWARE_RESTORE: firmware restoration supported: calls self-restore OPAL
> API
> + * FIRMWARE_SELF_SAVE: firmware save and restore: calls self-save OPAL API
> + * KERNEL_SAVE_RESTORE: kernel handles the saving and restoring of SPR
> */
> #define UNSUPPORTED 0x0
> #define FIRMWARE_RESTORE 0x1
> +#define FIRMWARE_SELF_SAVE 0x2
> +#define KERNEL_SAVE_RESTORE 0x4
>
> static u32 supported_cpuidle_states;
> struct pnv_idle_states_t *pnv_idle_states;
> int nr_pnv_idle_states;
> +/* Caching the lpcr & ptcr support to use later */
> +static bool is_lpcr_self_save;
> +static bool is_ptcr_self_save;
>
> struct preferred_sprs {
> u64 spr;
> @@ -51,6 +58,10 @@ struct preferred_sprs {
> /*
> * Supported mode: Default support. Can be overwritten during system
> * initialization
> + * Note: SPRs with support for KERNEL_SAVE_RESTORE in this list are only
> those
> + * which have a possibility of support from another firmware mode (i.e
> self-save
> + * or self-restore)
> + * SPRs with exclusive kernel save support are implicit.
> */
> struct preferred_sprs preferred_sprs[] = {
> {
> @@ -61,6 +72,10 @@ struct preferred_sprs preferred_sprs[] = {
> .spr = SPRN_LPCR,
> .supported_mode = FIRMWARE_RESTORE,
> },
> + {
> + .spr = SPRN_PTCR,
> + .supported_mode = KERNEL_SAVE_RESTORE,
> + },
> {
> .spr = SPRN_HMEER,
> .supported_mode = FIRMWARE_RESTORE,
> @@ -219,11 +234,33 @@ static int pnv_self_save_restore_sprs(void)
> curr_spr.spr == SPRN_HID4 ||
> curr_spr.spr == SPRN_HID5))
> continue;
> - if (curr_spr.supported_mode & FIRMWARE_RESTORE) {
> +
> + if (curr_spr.supported_mode & FIRMWARE_SELF_SAVE) {
> + rc = opal_slw_self_save_reg(pir,
> + curr_spr.spr);
> + if (rc != 0)
> + return rc;
> + switch (curr_spr.spr) {
> + case SPRN_LPCR:
> + is_lpcr_self_save = true;
Could you consider converting is_lpcr_self_save and is_ptcr_self_save
into static_keys ? For reference see commit
14c73bd344da("powerpc/vcpu: Assume dedicated processors as
non-preempt")
> + break;
> + case SPRN_PTCR:
> + is_ptcr_self_save = true;
> + break;
> + }
> + } else if (curr_spr.supported_mode & FIRMWARE_RESTORE) {
> rc = pnv_self_restore_sprs(pir, cpu,
> curr_spr.spr);
> if (rc != 0)
> return rc;
> + } else {
> + if (curr_spr.supported_mode &
> KERNEL_SAVE_RESTORE ||
> + (cpu_has_feature(CPU_FTR_ARCH_300) &&
> + (curr_spr.spr == SPRN_HID1 ||
> + curr_spr.spr == SPRN_HID4 ||
> + curr_spr.spr == SPRN_HID5)))
> + continue;
> + return OPAL_UNSUPPORTED;
> }
> }
> }
> @@ -762,7 +799,8 @@ static unsigned long power9_idle_stop(unsigned long
> psscr, bool mmu_on)
> mmcr0 = mfspr(SPRN_MMCR0);
> }
> if ((psscr & PSSCR_RL_MASK) >= pnv_first_spr_loss_level) {
> - sprs.lpcr = mfspr(SPRN_LPCR);
> + if (!is_lpcr_self_save)
> + sprs.lpcr = mfspr(SPRN_LPCR);
> sprs.hfscr = mfspr(SPRN_HFSCR);
> sprs.fscr = mfspr(SPRN_FSCR);
> sprs.pid = mfspr(SPRN_PID);
> @@ -776,7 +814,8 @@ static unsigned long power9_idle_stop(unsigned long
> psscr, bool mmu_on)
> sprs.mmcr1 = mfspr(SPRN_MMCR1);
> sprs.mmcr2 = mfspr(SPRN_MMCR2);
>
> - sprs.ptcr = mfspr(SPRN_PTCR);
> + if (!is_ptcr_self_save)
> + sprs.ptcr = mfspr(SPRN_PTCR);
> sprs.rpr = mfspr(SPRN_RPR);
> sprs.tscr = mfspr(SPRN_TSCR);
> if (!firmware_has_feature(FW_FEATURE_ULTRAVISOR))
> @@ -860,7 +899,8 @@ static unsigned long power9_idle_stop(unsigned long
> psscr, bool mmu_on)
> goto core_woken;
>
> /* Per-core SPRs */
> - mtspr(SPRN_PTCR, sprs.ptcr);
> + if (!is_ptcr_self_save)
> + mtspr(SPRN_PTCR, sprs.ptcr);
> mtspr(SPRN_RPR, sprs.rpr);
> mtspr(SPRN_TSCR, sprs.tscr);
>
> @@ -881,7 +921,8 @@ static unsigned long power9_idle_stop(unsigned long
> psscr, bool mmu_on)
> atomic_unlock_and_stop_thread_idle();
>
> /* Per-thread SPRs */
> - mtspr(SPRN_LPCR, sprs.lpcr);
> + if (!is_lpcr_self_save)
> + mtspr(SPRN_LPCR, sprs.lpcr);
> mtspr(SPRN_HFSCR, sprs.hfscr);
> mtspr(SPRN_FSCR, sprs.fscr);
> mtspr(SPRN_PID, sprs.pid);
> @@ -1060,8 +1101,10 @@ void pnv_program_cpu_hotplug_lpcr(unsigned int cpu,
> u64 lpcr_val)
> * Program the LPCR via stop-api only if the deepest stop state
> * can lose hypervisor context.
> */
> - if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT)
> - opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
> + if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT) {
> + if (!is_lpcr_self_save)
> + opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
> + }
> }
>
> /*
> @@ -1316,6 +1359,77 @@ static void __init pnv_probe_idle_states(void)
> supported_cpuidle_states |= pnv_idle_states[i].flags;
> }
>
> +/*
> + * Extracts and populates the self save or restore capabilities
> + * passed from the device tree node
Could you please document what @np and @support refer to here ?
> + */
> +static int extract_save_restore_state_dt(struct device_node *np, u32 support)
> +{
> + int nr_sprns = 0, i, bitmask_index;
> + u64 *temp_u64;
> + u64 bit_pos;
> +
> + nr_sprns = of_property_count_u64_elems(np, "sprn-bitmask");
> + if (nr_sprns <= 0)
> + return -EINVAL;
> + temp_u64 = kcalloc(nr_sprns, sizeof(u64), GFP_KERNEL);
> + if (of_property_read_u64_array(np, "sprn-bitmask",
> + temp_u64, nr_sprns)) {
> + pr_warn("cpuidle-powernv: failed to find registers in DT\n");
> + kfree(temp_u64);
> + return -EINVAL;
> + }
> + /*
> + * Populate acknowledgment of support for the sprs in the global vector
> + * gotten by the registers supplied by the firmware.
> + * The registers are in a bitmask, bit index within
> + * that specifies the SPR
> + */
> + for (i = 0; i < nr_preferred_sprs; i++) {
> + bitmask_index = BIT_ULL_WORD(preferred_sprs[i].spr);
> + bit_pos = BIT_ULL_MASK(preferred_sprs[i].spr);
> + if ((temp_u64[bitmask_index] & bit_pos) == 0) {
> + preferred_sprs[i].supported_mode &= ~support;
> + continue;
> + }
> + preferred_sprs[i].supported_mode |= support;
> + }
> +
> + kfree(temp_u64);
> + return 0;
> +}
> +
> +static int pnv_parse_deepstate_dt(void)
> +{
> + struct device_node *np;
> + int rc = 0, i;
> +
> + /*
> + * Self restore register population
> + * In the case the node is not found, the support for self-restore for
> + * already populated SPRs is *not* cut. This is because self-restore
> + * assumes legacy support. In an event, self-restore is actually not
> + * supported then the call to the firmware fails and deep stop states
> + * will be cut.
> + */
> + np = of_find_compatible_node(NULL, NULL, "ibm,opal-self-restore");
> + if (np) {
> + rc = extract_save_restore_state_dt(np, FIRMWARE_RESTORE);
> + if (rc != 0)
> + return rc;
> + }
> + /* Self save register population */
> + np = of_find_compatible_node(NULL, NULL, "ibm,opal-self-save");
> + if (!np) {
> + for (i = 0; i < nr_preferred_sprs; i++)
> + preferred_sprs[i].supported_mode &= ~FIRMWARE_SELF_SAVE;
> + } else {
> + rc = extract_save_restore_state_dt(np, FIRMWARE_SELF_SAVE);
> + }
> + of_node_put(np);
> + return rc;
> +}
> +
> /*
> * This function parses device-tree and populates all the information
> * into pnv_idle_states structure. It also sets up nr_pnv_idle_states
> @@ -1464,6 +1578,9 @@ static int __init pnv_init_idle_states(void)
> return rc;
> pnv_probe_idle_states();
>
> + rc = pnv_parse_deepstate_dt();
> + if (rc)
> + return rc;
> if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
> if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
> power7_fastsleep_workaround_entry = false;
> diff --git a/arch/powerpc/platforms/powernv/opal-call.c
> b/arch/powerpc/platforms/powernv/opal-call.c
> index 5cd0f52d258f..11e0ceb90de0 100644
> --- a/arch/powerpc/platforms/powernv/opal-call.c
> +++ b/arch/powerpc/platforms/powernv/opal-call.c
> @@ -223,6 +223,7 @@ OPAL_CALL(opal_handle_hmi,
> OPAL_HANDLE_HMI);
> OPAL_CALL(opal_handle_hmi2, OPAL_HANDLE_HMI2);
> OPAL_CALL(opal_config_cpu_idle_state,
> OPAL_CONFIG_CPU_IDLE_STATE);
> OPAL_CALL(opal_slw_set_reg, OPAL_SLW_SET_REG);
> +OPAL_CALL(opal_slw_self_save_reg, OPAL_SLW_SELF_SAVE_REG);
> OPAL_CALL(opal_register_dump_region, OPAL_REGISTER_DUMP_REGION);
> OPAL_CALL(opal_unregister_dump_region,
> OPAL_UNREGISTER_DUMP_REGION);
> OPAL_CALL(opal_pci_set_phb_cxl_mode, OPAL_PCI_SET_PHB_CAPI_MODE);
> --
> 2.17.1
>
