Update. HW decided that the panic was bad. Added a flashing led to the
critical temperature.
Cheers,
Sean
PIKA Warp: Update platform code to support Rev B boards.
* Switched from 64M NOR/64M NAND to 4M NOR/256M NAND.
* Full DTM support including critical temperature.
* Added POST information.
* Removed LED function, moved to new LED driver.
* Moved ad7414 to new style I2C initialization.
Signed-off-by: Sean MacLennan <[EMAIL PROTECTED]>
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index eb108a8..2178021 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -10,6 +10,7 @@
#include "ops.h"
#include "4xx.h"
#include "cuboot.h"
+#include "stdio.h"
#define TARGET_4xx
#define TARGET_44x
@@ -17,0 +18,0 @@
static bd_t bd;
-static void warp_fixups(void)
+static void warp_fixup_one_nor(u32 from, u32 to)
{
- unsigned long sysclk = 66000000;
+ void *devp;
+ char name[50];
+ u32 v[2];
+
+ sprintf(name, "/plb/opb/ebc/[EMAIL PROTECTED],0/[EMAIL PROTECTED]",
from);
+
+ devp = finddevice(name);
+ if (!devp)
+ return;
+
+ if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+ v[0] = to;
+ setprop(devp, "reg", v, sizeof(v));
+
+ printf("NOR 64M fixup %x -> %x\r\n", from, to);
+ }
+}
+
- ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+static void warp_fixups(void)
+{
+ ibm440ep_fixup_clocks(66000000, 11059200, 50000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+
+ /* Fixup for 64M flash on Rev A boards. */
+ if (bd.bi_flashsize == 0x4000000) {
+ void *devp;
+ u32 v[3];
+
+ devp = finddevice("/plb/opb/ebc/[EMAIL PROTECTED],0");
+ if (!devp)
+ return;
+
+ /* Fixup the size */
+ if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+ v[2] = bd.bi_flashsize;
+ setprop(devp, "reg", v, sizeof(v));
+ }
+
+ /* Fixup parition offsets */
+ warp_fixup_one_nor(0x300000, 0x3f00000);
+ warp_fixup_one_nor(0x340000, 0x3f40000);
+ warp_fixup_one_nor(0x380000, 0x3f80000);
+ }
}
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index b04a52e..fa070b0 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -132,40 +132,33 @@
[EMAIL PROTECTED],0 {
compatible = "pika,fpga";
- reg = <2 0 2200>;
+ reg = <2 0 1000>;
interrupts = <18 8>;
interrupt-parent = <&UIC0>;
};
+ [EMAIL PROTECTED],4000 {
+ compatible = "pika,fpga-sd";
+ reg = <2 4000 A00>;
+ };
+
[EMAIL PROTECTED],0 {
- compatible = "amd,s29gl512n",
"cfi-flash";
+ compatible = "amd,s29gl032a",
"cfi-flash";
bank-width = <2>;
- reg = <0 0 4000000>;
+ reg = <0 0 400000>;
#address-cells = <1>;
#size-cells = <1>;
- [EMAIL PROTECTED] {
- label = "kernel";
- reg = <0 180000>;
- };
- [EMAIL PROTECTED] {
- label = "root";
- reg = <180000 3480000>;
- };
- [EMAIL PROTECTED] {
- label = "user";
- reg = <3600000 900000>;
- };
- [EMAIL PROTECTED] {
+ [EMAIL PROTECTED] {
label = "fpga";
- reg = <3f00000 40000>;
+ reg = <300000 40000>;
};
- [EMAIL PROTECTED] {
+ [EMAIL PROTECTED] {
label = "env";
- reg = <3f40000 40000>;
+ reg = <340000 40000>;
};
- [EMAIL PROTECTED] {
+ [EMAIL PROTECTED] {
label = "u-boot";
- reg = <3f80000 80000>;
+ reg = <380000 80000>;
};
};
};
@@ -186,6 +179,16 @@
reg = <ef600700 14>;
interrupt-parent = <&UIC0>;
interrupts = <2 4>;
+ index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ [EMAIL PROTECTED] {
+ compatible = "adi,ad7414";
+ reg = <4a>;
+ interrupts = <19 8>;
+ interrupt-parent = <&UIC0>;
+ };
};
GPIO0: [EMAIL PROTECTED] {
diff --git a/arch/powerpc/platforms/44x/warp-nand.c
b/arch/powerpc/platforms/44x/warp-nand.c
index 9150318..4c6a2a5 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -11,8 +11,10 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/ndfc.h>
+#include <linux/of_platform.h>
#include <asm/machdep.h>
+
#ifdef CONFIG_MTD_NAND_NDFC
#define CS_NAND_0 1 /* use chip select 1 for NAND device 0 */
@@ -35,13 +37,23 @@ static struct mtd_partition nand_parts[] = {
{
.name = "root",
.offset = 0x0200000,
- .size = 0x3400000
+ .size = 0x3E00000
+ },
+ {
+ .name = "persistent",
+ .offset = 0x4000000,
+ .size = 0x4000000
},
{
- .name = "user",
- .offset = 0x3600000,
- .size = 0x0A00000
+ .name = "persistent1",
+ .offset = 0x8000000,
+ .size = 0x4000000
},
+ {
+ .name = "persistent2",
+ .offset = 0xC000000,
+ .size = 0x4000000
+ }
};
struct ndfc_controller_settings warp_ndfc_settings = {
@@ -67,19 +79,15 @@ static struct platform_device warp_ndfc_device = {
.resource = &warp_ndfc,
};
-static struct nand_ecclayout nand_oob_16 = {
- .eccbytes = 3,
- .eccpos = { 0, 1, 2, 3, 6, 7 },
- .oobfree = { {.offset = 8, .length = 16} }
-};
-
+/* Do NOT set the ecclayout: let it default so it is correct for both
+ * 64M and 256M flash chips.
+ */
static struct platform_nand_chip warp_nand_chip0 = {
.nr_chips = 1,
.chip_offset = CS_NAND_0,
.nr_partitions = ARRAY_SIZE(nand_parts),
.partitions = nand_parts,
- .chip_delay = 50,
- .ecclayout = &nand_oob_16,
+ .chip_delay = 20,
.priv = &warp_chip0_settings,
};
@@ -96,6 +104,23 @@ static struct platform_device warp_nand_device = {
static int warp_setup_nand_flash(void)
{
+ struct device_node *np;
+
+ /* Try to detect a rev A based on NOR size. */
+ np = of_find_compatible_node(NULL, NULL, "cfi-flash");
+ if (np) {
+ struct property *pp;
+
+ pp = of_find_property(np, "reg", NULL);
+ if (pp && (pp->length == 12)) {
+ u32 *v = pp->value;
+ if (v[2] == 0x4000000)
+ /* Rev A = 64M NAND */
+ warp_nand_chip0.nr_partitions = 2;
+ }
+ of_node_put(np);
+ }
+
platform_device_register(&warp_ndfc_device);
platform_device_register(&warp_nand_device);
diff --git a/arch/powerpc/platforms/44x/warp.c
b/arch/powerpc/platforms/44x/warp.c
index 39cf615..1b2d09e 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -12,6 +12,10 @@
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/kthread.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/pika.h>
+#include <linux/delay.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -27,6 +31,18 @@ static __initdata struct of_device_id warp_of_bus[] = {
{},
};
+static __initdata struct i2c_board_info warp_i2c_info[] = {
+ { I2C_BOARD_INFO("ad7414", 0x4a) }
+};
+
+static int __init warp_arch_init(void)
+{
+ /* This should go away once support is moved to the dts. */
+ i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
+ return 0;
+}
+machine_arch_initcall(warp, warp_arch_init);
+
static int __init warp_device_probe(void)
{
of_platform_bus_probe(NULL, warp_of_bus, NULL);
@@ -52,61 +68,200 @@ define_machine(warp) {
};
-#define LED_GREEN (0x80000000 >> 0)
-#define LED_RED (0x80000000 >> 1)
+/* I am not sure this is the best place for this... */
+static int __init warp_post_info(void)
+{
+ struct device_node *np;
+ void __iomem *fpga;
+ u32 post1, post2;
+
+ /* Sighhhh... POST information is in the sd area. */
+ np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd");
+ if (np == NULL)
+ return -ENOENT;
+
+ fpga = of_iomap(np, 0);
+ of_node_put(np);
+ if (fpga == NULL)
+ return -ENOENT;
+
+ post1 = in_be32(fpga + 0x40);
+ post2 = in_be32(fpga + 0x44);
+
+ iounmap(fpga);
+
+ if (post1 || post2)
+ printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
+ else
+ printk(KERN_INFO "Warp POST OK\n");
+
+ return 0;
+}
+machine_late_initcall(warp, warp_post_info);
+
+
+#ifdef CONFIG_SENSORS_AD7414
+static LIST_HEAD(dtm_shutdown_list);
+static void __iomem *dtm_fpga;
+static void __iomem *gpio_base;
-/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */
-void warp_set_power_leds(int green, int red)
+
+struct dtm_shutdown {
+ struct list_head list;
+ void (*func)(void *arg);
+ void *arg;
+};
+
+
+int dtm_register_shutdown(void (*func)(void *arg), void *arg)
+{
+ struct dtm_shutdown *shutdown;
+
+ shutdown = kmalloc(sizeof(struct dtm_shutdown), GFP_KERNEL);
+ if (shutdown == NULL)
+ return -ENOMEM;
+
+ shutdown->func = func;
+ shutdown->arg = arg;
+
+ list_add(&shutdown->list, &dtm_shutdown_list);
+
+ return 0;
+}
+
+int dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
{
- static void __iomem *gpio_base = NULL;
- unsigned leds;
-
- if (gpio_base == NULL) {
- struct device_node *np;
-
- /* Power LEDS are on the second GPIO controller */
- np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
- if (np)
- np = of_find_compatible_node(np, NULL,
"ibm,gpio-440EP");
- if (np == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
- return;
+ struct dtm_shutdown *shutdown;
+
+ list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+ if (shutdown->func == func && shutdown->arg == arg) {
+ list_del(&shutdown->list);
+ kfree(shutdown);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static irqreturn_t temp_isr(int irq, void *context)
+{
+ struct dtm_shutdown *shutdown;
+
+ local_irq_disable();
+
+ /* Run through the shutdown list. */
+ list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+ shutdown->func(shutdown->arg);
+
+ printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n");
+
+ while (1) {
+ if (dtm_fpga) {
+ unsigned reset = in_be32(dtm_fpga + 0x14);
+ out_be32(dtm_fpga + 0x14, reset);
+ }
+
+ if (gpio_base) {
+ unsigned leds = in_be32(gpio_base);
+
+ /* green off, red toggle */
+ leds &= ~0x80000000;
+ leds ^= 0x40000000;
+
+ out_be32(gpio_base, leds);
}
+ mdelay(500);
+ }
+}
+
+static void pika_setup_critical_temp(struct i2c_client *client)
+{
+ struct device_node *np;
+ int irq, rc;
+
+ /* Setup power LEDS for possible critical temp */
+ np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
+ if (np)
+ np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP");
+ if (np) {
gpio_base = of_iomap(np, 0);
of_node_put(np);
- if (gpio_base == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to map gpio");
- return;
- }
}
- leds = in_be32(gpio_base);
+ /* These registers are in 1 degree increments. */
+ i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
+ i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
- switch (green) {
- case 0: leds &= ~LED_GREEN; break;
- case 1: leds |= LED_GREEN; break;
+ np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+ if (np == NULL) {
+ printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
+ return;
}
- switch (red) {
- case 0: leds &= ~LED_RED; break;
- case 1: leds |= LED_RED; break;
+
+ irq = irq_of_parse_and_map(np, 0);
+ of_node_put(np);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
+ return;
}
- out_be32(gpio_base, leds);
+ rc = request_irq(irq, temp_isr, 0, "ad7414", NULL);
+ if (rc) {
+ printk(KERN_ERR __FILE__
+ ": Unable to request ad7414 irq %d = %d\n", irq, rc);
+ return;
+ }
}
-EXPORT_SYMBOL(warp_set_power_leds);
+static inline void pika_dtm_check_fan(void __iomem *fpga)
+{
+ static int fan_state;
+ u32 fan = in_be32(fpga + 0x34) & (1 << 14);
+
+ if (fan_state != fan) {
+ fan_state = fan;
+ if (fan)
+ printk(KERN_WARNING "Fan rotation error detected."
+ " Please check hardware.\n");
+ }
+}
-#ifdef CONFIG_SENSORS_AD7414
static int pika_dtm_thread(void __iomem *fpga)
{
- extern int ad7414_get_temp(int index);
+ struct i2c_adapter *adap;
+ struct i2c_client *client;
+
+ /* We loop in case either driver was compiled as a module and
+ * has not been insmoded yet.
+ */
+ while (!(adap = i2c_get_adapter(0))) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+ while (1) {
+ list_for_each_entry(client, &adap->clients, list)
+ if (client->addr == 0x4a)
+ goto found_it;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+found_it:
+ i2c_put_adapter(adap);
+
+ pika_setup_critical_temp(client);
+
+ printk(KERN_INFO "PIKA DTM thread running.\n");
while (!kthread_should_stop()) {
- int temp = ad7414_get_temp(0);
+ u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
+ out_be32(fpga + 0x20, temp);
- out_be32(fpga, temp);
+ pika_dtm_check_fan(fpga);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ);
@@ -115,37 +270,44 @@ static int pika_dtm_thread(void __iomem *fpga)
return 0;
}
+
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;
struct device_node *np;
- struct resource res;
- void __iomem *fpga;
np = of_find_compatible_node(NULL, NULL, "pika,fpga");
if (np == NULL)
return -ENOENT;
- /* We do not call of_iomap here since it would map in the entire
- * fpga space, which is over 8k.
- */
- if (of_address_to_resource(np, 0, &res)) {
- of_node_put(np);
- return -ENOENT;
- }
+ dtm_fpga = of_iomap(np, 0);
of_node_put(np);
-
- fpga = ioremap(res.start, 0x24);
- if (fpga == NULL)
+ if (dtm_fpga == NULL)
return -ENOENT;
- dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm");
+ dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm");
if (IS_ERR(dtm_thread)) {
- iounmap(fpga);
+ iounmap(dtm_fpga);
return PTR_ERR(dtm_thread);
}
return 0;
}
-device_initcall(pika_dtm_start);
+machine_late_initcall(warp, pika_dtm_start);
+
+#else /* !CONFIG_SENSORS_AD7414 */
+
+int dtm_register_shutdown(void (*func)(void *arg), void *arg)
+{
+ return 0;
+}
+
+int dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+ return 0;
+}
+
#endif
+
+EXPORT_SYMBOL(dtm_register_shutdown);
+EXPORT_SYMBOL(dtm_unregister_shutdown);
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
