From: Valentine Barshak <[EMAIL PROTECTED]>
The PowerPC 440GX Taishan board fails to reset EMAC3 (reset timeout error)
if there's no link. Because of that it fails to find PHY chip. The older
ibm_emac
driver had a workaround for that: the EMAC_CLK_INTERNAL/EMAC_CLK_EXTERNAL
macros,
which toggle the Ethernet Clock Select bit in the SDR0_MFR register. This patch
does the same for "ibm,emac-440gx" compatible chips. The workaround forces
clock on -all- EMACs, so we select clock under global emac_phy_map_lock.
BenH: Made that #ifdef CONFIG_PPC_DCR_NATIVE for now as dcri_* stuff doesn't
exist for MMIO type DCRs like Cell. Some future rework & improvements of the
DCR infrastructure will make that cleaner but for now, this makes it work.
Signed-off-by: Valentine Barshak <[EMAIL PROTECTED]>
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
drivers/net/ibm_newemac/core.c | 18 +++++++++++++++++-
drivers/net/ibm_newemac/core.h | 8 ++++++--
2 files changed, 23 insertions(+), 3 deletions(-)
--- linux-work.orig/drivers/net/ibm_newemac/core.c 2008-04-22
10:11:59.000000000 +1000
+++ linux-work/drivers/net/ibm_newemac/core.c 2008-04-22 10:31:18.000000000
+1000
@@ -43,6 +43,8 @@
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/uaccess.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
#include "core.h"
@@ -2333,6 +2335,11 @@ static int __devinit emac_init_phy(struc
dev->phy.mdio_read = emac_mdio_read;
dev->phy.mdio_write = emac_mdio_write;
+ /* Enable internal clock source */
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS);
+#endif
/* Configure EMAC with defaults so we can at least use MDIO
* This is needed mostly for 440GX
*/
@@ -2365,6 +2372,12 @@ static int __devinit emac_init_phy(struc
if (!emac_mii_phy_probe(&dev->phy, i))
break;
}
+
+ /* Enable external clock source */
+#ifdef CONFIG_PPC_DCR_NATIVE
+ if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
+ dcri_clrset(SDR0, SDR0_MFR, SDR0_MFR_ECS, 0);
+#endif
mutex_unlock(&emac_phy_map_lock);
if (i == 0x20) {
printk(KERN_WARNING "%s: can't find PHY!\n", np->full_name);
@@ -2490,8 +2503,11 @@ static int __devinit emac_init_config(st
}
/* Check EMAC version */
- if (of_device_is_compatible(np, "ibm,emac4"))
+ if (of_device_is_compatible(np, "ibm,emac4")) {
dev->features |= EMAC_FTR_EMAC4;
+ if (of_device_is_compatible(np, "ibm,emac-440gx"))
+ dev->features |= EMAC_FTR_440GX_PHY_CLK_FIX;
+ }
/* Fixup some feature bits based on the device tree */
if (of_get_property(np, "has-inverted-stacr-oc", NULL))
Index: linux-work/drivers/net/ibm_newemac/core.h
===================================================================
--- linux-work.orig/drivers/net/ibm_newemac/core.h 2008-04-22
10:06:31.000000000 +1000
+++ linux-work/drivers/net/ibm_newemac/core.h 2008-04-22 10:30:03.000000000
+1000
@@ -301,6 +301,10 @@ struct emac_instance {
* Set if we have new type STACR with STAOPC
*/
#define EMAC_FTR_HAS_NEW_STACR 0x00000040
+/*
+ * Set if we need phy clock workaround for 440gx
+ */
+#define EMAC_FTR_440GX_PHY_CLK_FIX 0x00000080
/* Right now, we don't quite handle the always/possible masks on the
@@ -312,8 +316,8 @@ enum {
EMAC_FTRS_POSSIBLE =
#ifdef CONFIG_IBM_NEW_EMAC_EMAC4
- EMAC_FTR_EMAC4 | EMAC_FTR_HAS_NEW_STACR |
- EMAC_FTR_STACR_OC_INVERT |
+ EMAC_FTR_EMAC4 | EMAC_FTR_HAS_NEW_STACR |
+ EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
#endif
#ifdef CONFIG_IBM_NEW_EMAC_TAH
EMAC_FTR_HAS_TAH |
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
